Products in Paints & Coatings: Composites

Circa 1850® Stain'n Varnish is both a wood stain and a varnish finish in one. Its unique gel formulation maintains a consistent blend of stain and varnish throughout the can, so there's no mixing or stirring required. As a result, you ensure uniformity from the beginning of your project to the end. And because it's a gel, it goes on without runs, drips or brush marks. Stain'n Varnish can be used on virtually any surface including wood furniture, molding, paneling and floors, pottery, metal, plastic, fiberglass, masonite and composites (or composite doors). Stain'n Varnish comes in 22 pre-mixed colors (and about a million custom-tinted colors) to suit any decor.

Advanced Technical Products Supply ATP-R10B2 is a protective coating with excellent lubrication and is used in launders & runners, auto-pour ladles, troughs & tubes, etc.

Advanced Technical Products Supply ATP-R12 is used as a protective coating with excellent lubrication and is used in the melting & casting of Aluminum, Magnesium, Zinc.

Advanced Technical Products Supply ATP-R11B provides refractory protection, has excellent lubrication and is used in launders & runners, auto-pour ladles, etc.

Advanced Technical Products Supply ATP-R11 is a protective coating with excellent lubrication and is used in launders & runners, auto-pour ladles, troughs & tubes, etc.

Advanced Technical Products Supply ATP-R33 is used as a protective coating with excellent lubrication and is used in immersion tubes, metal troughs, etc.

Advanced Technical Products Supply ATP-R20 is used as a protective coating with excellent lubrication and is used in hot pressing and glass forming.

NANOMYTE® SR-500EC-UVP is a transparent coating designed to provide easy-to-clean surfaces with excellent weatherability and UV protection for underlying substrates. The product, a hard, dense and smooth coating, is a nanostructured composite consisting of organic and inorganic phases. The coating resists scratching and chipping, strongly adheres to metal, glass and ceramic surfaces, and has superior water repellency and soil resistance. SR-500EC-UVP is a single component product that is easily applied by dip, spray or brush techniques and cured at room temperature.

NANOMYTE® TC-4001-UVP is a single component formulation designed to protect metals and other surfaces from degrading, preserving their structural integrity and appearance. The hard, dense, and smooth coating is a nanostructured composite consisting of organic and inorganic phases. It resists scratching and chipping and adheres strongly to bare, pretreated, or painted metal surfaces, thus providing a durable barrier to liquids and gasses. A variety of other surfaces may be coated as well, such as plastics and composites. The coating is easily applied by immersion, spraying or brushing, in thicknesses ranging from microns to mils, and is available in glossy or matte finishes.

Advanced Technical Products Supply ATP-R10 is a protective coating with excellent lubrication and is used in launders & runners, auto-pour ladles, troughs & tubes, etc.

NANOMYTE® TC-5001-UVP is a single component formulation designed to protect zinc-plated and galvanized steel from corrosion and degradation. The product is a hard, dense nanocomposite coating that provides barrier protection for the alloy surface. The coating resists scratching and chipping, and strongly adheres to the substrate. The formulation has enhanced weatherability and is designed to meet customers’ requirements for film thickness and curing conditions.

Arostruct® is a fast set, rapid curing, 100% solids, semi-structural, two-component performance modified polyurea spray coating/lining material. Its fast gel time makes it suitable for applications down to -20°F without special conditioning of the component resins and isocyanates. AroStruct produces an extremely tough rigid film at all thicknesses.

VF 280™ is a fast set, rapid curing, pure elastomeric polyurea protective coating for industrial applications requiring a flexible coating or lining for waterproofing or secondary containment. This protective membrane can be applied to geotextile fabric, concrete and steel substrates. VF 280 is a volatile free, odorless system proportioned at a 1:1 mix ratio with plural component spray equipment. VF 280 may be applied at varying thicknesses in a single application using a multi-pass spray technique.

FSS 50DM+™ is a 100% solids, fast setting, plu-ral component, polyurea elastomer and high perfor-mance coating. FSS 50DM+ is primarily designed for properly prepared steel and metal substrates, however, due to it’s higher modulus, and faster gel times, FSS 50DM+ has excellent bond to concrete, masonry and other properly prepared substrates. FSS 50DM+ can be applied horizontally, vertically, and overhead, making it ideal for industrial applications with a variety of sub-strates, and complex geometries.

VF 380™ is a 100% solids, fast setting, plural component, ultra-low shrink, polyurea elastomer and high performance coating. VF-380 is primarily designed for foam, geotextile and other non-reinforced substrates due to its specially designed low shrink formulation, but has excellent bond to steel, concrete, masonry and other properly prepared substrates. VF-380 is an excellent coatings solution for industrial applications requiring a resilient liner for waterproofing or secondary containment.

VF 380-F™ is a 100% solids elastomeric polyurea developed for applications such as geotextile lining membranes. VF380-F may also be applied to concrete and steel substrates. VF380-F is a volatile free, odorless system applied with 1:1 mix ratio with plural component spray equipment. VersaFlex VF380-F provides less shrinkage with improved elongation characteristics. As a result, VF380-F makes an excellent polyurea for liners, geotextile coatings, and applications where resilience and durability are required. VF380-F may be applied at varying thicknesses in a single application using a multi-pass spray technique.

VF 330™ is a 100% solid, fast setting, plural component, polyurea elastomer and high performance coating. VF 330 is specially formulated for high abrasion resistance and offers the best combination of elastomeric waterproofing, corrosion protection, and abrasion resistance. VF 330 can be applied horizontally, vertically, and overhead, making it ideal for industrial applications with a variety of substrates, and complex geometries.

GRANICOAT® Alicon is a revolutionary solid surface material, factory applied by a fabricator, using conventional spray equipment.

UC Coatings Stay Clean Moss & Algae Prevention Solution - Ready to Use contains a mold and algae inhibitor that protects the film it forms on substrates from microbes. Stay Clean’s water-based acrylic binder chemistry will adhere to most porous surfaces. It is delivered in concentrated form and is easy to dilute, mix, and apply. Stay Clean combines high performance, ease of use and consumer safety with the environmentally-friendly benefits common to water-based technologies.

GRANICOAT® Mountain is a revolutionary solid surface material, factory applied by a fabricator, using conventional spray equipment.

Paradigm Labs Pyromescent is a one-part water based intumescent coating similar in appearance to ordinary latex base paint. Upon exposure to flame or heat, it immediately foams and swells (intumesces) providing an effective non-combus- tible insulation and heat shield to protect the subsurface. Pyromescent also cures to a durable, mold-resistant protective coating for the long-lasting protection of most construction materials.. It can be used for the protection of post-remediation surfaces as well as new construction applications. Pyromescent contains EPA-registered mi- crobiocides to prevent mold, mildew, algae, bacteria and biological growth on the coating surface. Pyromescent can be applied to many types of surfaces providing an at- tractive flat finish. Pyromescent passes fire retardancey tests ASTM E 119 and E 84. Pyromescent low-VOC for- mula contributes 1 point via LEED Credit 4.2 (low-emitting paints & coatings) to any project.

SE-678 Epoxy Primer is a fast dry, fast curing epoxy that has excellent corrosion resistance and adhesion. This epoxy primer can be used on all properly prepared metals and plastics. SE-678 Epoxy Primer can be topcoated with any topcoat system including acrylic lacquer.

GRANICOAT® Spray Chip2 is a revolutionary solid surface material, factory applied by a fabricator, using conventional spray equipment.

UP0719 Reface is a high build, 2K sprayable polyester specially developed to create an ultra flat surface prior to priming. The improved formulation features excellent adhesion to most substrates, creating an easy to sand base over steel and fiberglass surfaces, even vertical surfaces.

GRANICOAT® Sparkle is a revolutionary solid surface material, factory applied by a fabricator, using conventional spray equipment.

IMPERVIUS™ ME is a 100% solids, 2 component, modified polymer, when used with selected aggregates; is designed to protect reinforced concrete, steel plate and FRP composite bridge decks from adverse effects of traffic, extreme weather conditions and deicing chemicals as well provide a skid resistant surface. Meets applicable ASTM, AASHTO and State specifications.

VF 502™ is a fast set, rapid curing, 100% solids, flexible, two-component polyurethane/polyurea elastomer spray coating material. VF 502 was developed for use in high-pressure spray equipment and is used by itself or in combination with other materials to produce a protective coating on metal, concrete, aluminum, and composite substrates. VF 502 creates an extremely tough film at all thicknesses and can produce films from 10 mils to 250 mils without visible sag or runs in single or multiple pass applications. This material is relatively moisture and temperature insensitive, allowing use in the most problematic ambient conditions.

Abocoat 8508-3 is the first choice for heavy-duty protection and rebuilding of smooth, spalled, cracked or pitted floors. Apply to concrete, masonry, wood, metal, glass and composite surfaces. Ideal for seamless floors in heavy-traffic areas. Can be used with sand or grit to make a great anti-slip surface.

UP0739 Reface is a high build, 2K sprayable polyester specially developed to create an ultra flat surface prior to priming. The improved formulation features excellent adhesion to most substrates, creating an easy to sand base over steel and fiberglass surfaces, even vertical surfaces.

UP0722 is a hard, durable underbody coating that can be used to reproduce the manufacturers orginal stone chip protective finish. Sound and vibration dampening makes it ideal for use inside compartments and panels.

IMPERVIUS™ EU is a 100% solids, 2 component hybrid polymer, when used with selected aggregates; is designed to protect reinforced concrete, steel plate and FRP composite bridge decks from adverse effects of traffic, extreme weather conditions and deicing chemicals as well provide a skid resistant surface. Meets applicable ASTM, AASHTO and State specifications

Tech Line Coatings C-Lube Ceramic Dry Film Lubricant is a thermally cured Dry Film Lubricant. C-Lube has been designed to provide high pressure lubrication to surfaces subject to sliding, rotating or oscillating motion. C-Lube makes use of several design characteristics in managing friction. It applies in a thin film that is based on a ceramic metallic resin system that allows the coating to be burnished to a film less than .0001” in thickness, allowing extremely tight clearances to be utilized. C-Lube may be pre-burnished prior to installation/assembly of a part or will burnish during operation. The coating is also designed to aid in the more even transfer of heat, reducing hot spots. The low 350°F cure temperature allows for the coating to be used on a variety of substrates. C-Lube may be used on both wet and non-wetted surfaces.

Intumax LAY41 is a unique one component latex fire retardant - intumescent coating based on our proprietary non-halogenated phosphate technology. All of our phosphates are manufactured in house for our exclusive use. When exposed to heat and/or fire, INTUMAX®LAY41 forms a continuous, dense char foam that protects products from both heat and flame. Additionally, INTUMAX®LAY41 offers very low smoke generation during char formation. We have achieved an equivalent Class A flame spread rating in house. The active ingredients in INTUMAX® products are not soluble in water and will not leach out over time. INTUMAX®LAY41 is recommended for use as a coating for wood, composites, plastics or metals. The viscosity is easily reduced by the addition of water. Pigments, anti-settling agents, and other flame retardants may also be incorporated. INTUMAX®LAY41 can be brushed on, rolled on, or sprayed on. 2 coats are recommended at a minimum. Wait minimum 30 minutes between coats.

Weatherskin Coatings WSM9 CC High Traffic is a two-part, water-borne, VOC-compliant, linear polyester polyurethane enamel. It will provide appearance and performance equal to its solvent-borne counterparts. WSM9 topcoat comes in clear gloss and clear satin. WSM9 is extremely weatherable and abrasion-resistant and will retain its appearance for long periods in a variety of environments. For use over WS Primer, Weatherskin Epoxies, Weatherskin membranes or properly prepared surfaces.

Epox-Zen™ HSP is an 2K epoxy primer high solids. The formulations offering the finest in corrosion protection, chemical resistance, adhesion and topcoat hold-out. Providing durable protection over ferrous and non-ferrous metals, certain FPRs and composites, Epox-Zen™ Epoxy Primers are a substantial upgrade from conventional alkyd primers.

Cardinal 1# VOC SANDING ACRYLIC POLYURETHANE 6760 is a 1 LB/GAL VOC solvent two-component polyurethane sanding primer designed to be applied directly to a variety of plastics, wood and composite substrates. The product is defined by fast dry, chemical resistance, hydrolysis resistance, adhesion and sand ability.