U-POL UP0739

Identification & Functionality

Chemical Family: Polyesters
Product Type: 2K (2 component) Coating
Technologies: Ready-to-Use Products
Product Families: Ready-to-Use Products — Paints & Coatings
Other Paints & Coatings

Features & Benefits

Ready-to-Use Product Features: Excellent Substrate Adhesion
Features: High film build.

Easy to sand.

Includes liquid hardener.
Additional information: Important Remarks

Activated material should not be returned to the original can of non-activated material.

Do not exceed recommended levels of addition.

Do not use activated product beyond pot life

Equipment Cleaning

Clean gun immediately after use with acetone.

Applications & Uses

Markets: Paints & Coatings
Applications: Paints & Coatings — Other Paints & Coatings Applications
Application Method: Spray
Compatible Substrates & Surfaces: Composites,
Fiberglass,
Metal
Surface Preparation: Substrate

Bare Steel
Original Paint
Fiberglass / GRP,SMC
Polyester Body Filler

Degreaser

SYSTEM 20 Solvent-Based Degreaser
SYSTEM 20 Solvent-Based Degreaser
SYSTEM 20 Water-Based Degreaser
SYSTEM 20 Solvent-Based Degreaser

Abrasion

P80
P180
P180
P80 - P180

For best results, good preparation is essential. Clean and degrease removing dirt, oil, grease and wax with cleaning solutions such as U-POL's SYSTEM 20 Degreasers (please check local VOC regulations). Abrade with grit paper as stated above for each respective substrate. Re-clean, dry and degrease the abraded substrate ready for application. PLEASE NOTE: this product is not recommended for application over thermoplastic acrylics. PLEASE NOTE: this product is not recommended for application over aluminum, galvanized (zinc coated) or etch primers.
Mixing: Ensure this product is well shaken/mixed prior to application.
Overcoating: Once sanded, this formulation can be overcoated with most water/solvent-based paint systems. A primer must be used prior to topcoat application.
Applications

Properties

	Value	Units	Test Method / Conditions
Density	1.595	g/cm³	-
Viscosity, dynamic	4250.0	cP	-

	Value	Units	Test Method / Conditions
As Packaged Regulatory VOC	405.0	g/l	-
As Packaged Actual VOC	405.0	g/l	-
As Applied Regulatory VOC (Mixing ratio 5 vol %)	370.0	g/l	-
As Applied Actual VOC (Mixing ratio 5 vol %)	370.0	-	-
Percent Solids	74.8	wt%	-
Percent Solids	46.54	vol %	-
Volatiles	25.2	wt%	-
Water Content	0.0	wt%	-
Water Content	0.0	vol %	-
Exempt Compounds by weight	0.0	wt%	-
Exempt Compounds by volume	0.0	vol %	-
EPA HAPS	22.46	wt%	-
Recommended Storage Temperature	max. 77	°F	-
Gun Setup (Gun Tip Size (HVLP))	2.0 – 3.0	mm	-
Gun Setup (Air Pressure at Gun (HVLP))	2.1	bar	-
Drying Time (Dry to Sand (70 °F))	2 – 3	hours	-
Drying Time (Dry to Sand (140°F))	30.0	minutes	-
Sanding (Dry Sanding)	P180 - P220	-	-

Technical Details & Test Data

Packaging & Availability

Storage & Handling

Storage Information: Store in a well-ventilated place. Keep cool. Keep container tightly closed. Store locked up. Keep only in original container.
Shelf Life: 1 year

Knowde Enhanced TDS