Products in Other Consumer Goods Applications: Automotive Exterior P...

SABIC's Specialties Business EXL9330 is an opaque (PC)- siloxane copolymer resin that offers extreme low temperature (-60 C) ductility in combination with excellent processability. This UV stabilized, medium flow resin features UL f1/V-0/5VA rating with non-chlorinated, non-brominated flame retardant agents for wide range of colors. EXL9330 is an excellent candidate for a broad range of applications such as mobile phones, tablets, industrial housings, electric circuit protection, personal safety helmets, electric vehicle supply equipment (EVSE) housings and connectors.

Medium/high heat grade with superior impact resistance, PC-modified, low emission. Major Benefits: Low emission; Very high impact (PC modified). Typical Applications: Radiator grille, Tailgate cover, Glove box, Instrument panel parts.

PC/ABS blend, injection molding grade with excellent mechanical properties balance up to -40ºC. Vicat B120 = 120ºC. Major Benefits: High flow; Very high impact up to -40ºC; Low emission grade; UV stabilized grade; Good stability even with high humidity conditions; Low shrinkage; Good paintability; Thin-walled parts. Typical Applications: Radiator grille, Pillars, Instrument panel parts, Seating parts, Center console trim, Door components, Small household, Electrical switches, distribution boards, power sets. Chemical composition: Thermoplastic polymer blend based on polycarbonate (PC) and acrylonitrile-butadienestyrene (ABS).

Using fibers from textile production as raw materials it is possible to produce a range of products considered eco-sustainable and of excellent quality. The bases of textile origin are considered pure, have excellent technical properties, a low specific weight, chemical resistance to solvents (oils, greases and fuels), a very low moisture absorption. Responding to the various needs in the reference sectors, Remid 6 does not in any way affect the quality of the final products.

Oxy Vinyls 255 is a Polyvinyl Chloride Homopolymer which is white, free flowing powder.

SAMBARK LFT PP2230 is the product of injection moldable (Long-Fiber reinforced Thermoplastics) resin manufactured with a unique pultrusion technology. LFT is supplied as pellets from 6mm to 25mm long with same length of glass fibers. LFT is ideal for structural parts in automotive and industrial application. LFT is a new material that can reduce weight & cost by replacing of heavy materials.

TİSESTER® F 15D03 R01 is a PBT, 15% Glass Fiber Reinforced, Natural

Using fibers from textile production as raw materials it is possible to produce a range of products considered eco-sustainable and of excellent quality. The bases of textile origin are considered pure, have excellent technical properties, a low specific weight, chemical resistance to solvents (oils, greases and fuels), a very low moisture absorption. Responding to the various needs in the reference sectors, Remid 66 does not in any way compromise the quality of the final products.

Smiths Metal Centers Polycarbonate (PC GF 20) is an enhanced version of PC, with improved stiffness, tensile strength and a lower coefficient thermal expansion.

Ebalta MG 703 / Z 400 is a 2-components polyurethane material, which is cured thermically and used for prototypes. The four mentioned formulations differ in being filled or non-filled and their mechanical properties. The B-components Z 400 (potlife 8-12 min.) and Z 460 (potlife 60-70 min.) are identical and can be mixed with each other to control the reactivity, e.g. potlife. These combinations of Z 400 and Z 460 comp. B can be made any way as long as the totally required quantity of comp. B is observed (for each system).

Nevimid 6 MLD E300 NATURALE is toughened. Its used in Automotive & Agricolture Consumer Goods.

8 MELT FLOW HIGH IMPACT COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 3208 is made via UNIPOL PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for injection molding of automotive and consumer product applications. Also contains a long-term heat aging additive system.The 3208 product provides: Wet/Dry environment resistance Superior balance of stiffness and impact strength Excellent long term heat aging properties Excellent color and processing stability Enhanced weld-line strength Pinnacle's 3208 polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).

10% Talc Filled CoPolymer PolypropyleneNoble Polymers FivePlus series of filled polypropylene compounds offers processors a wide range of filler and physical properties options. FivePlus compounds are available with your choice of mineral fillers. FivePlus filled polypropylene compounds provide a unique balance of physical properties and ease of processing. A full range of flexural modulus, impact and other physical property options allows you to customize a solution to meet your specific application's needs.FivePlus compounds are used in automotive, heavy truck, consumer goods, building and construction and many other industries for applications such as brackets, housings, trim panels and other applications that require a balance of durability, dimensional stability and processability.Features Include:Filler range from 10 - 40%Available in natural, black or custom colorsAdditive packages include: UV stabilization, heat stabilizers and scratch and mar resistanceCan be formulated utilizing reprocessed base materialsFormulations available for extrusion processes upon requestCustomized formulations available to meet your specific needAll FivePlus products are 100% recyclable

N67A-EE3 is manufactured with elastic properties similar to vulcanized rubber and superior to traditional plastics. It is recyclable and reusable at the point of transformation, with a significant reduction in the weight of the piece and with an evident improvement in the profitability of the processes. It is suitable for the transformation process such as extrusion

Nevitane M 250 D12 NATURALE is a Thermoplastic polyurethane. its used in Automotive & Agricolture Consumer Goods

N55A-EE0 is manufactured with elastic properties similar to vulcanized rubber and superior to traditional plastics. It is recyclable and reusable at the point of transformation, with a significant reduction in the weight of the piece and with an evident improvement in the profitability of the processes. It is suitable for the transformation process such as extrusion

TPE Solutions TPV 160A is a thermoplastic Elastomer (TPE), that is based on PP/EPDM. It is designed to replace thermoset elastomers, such as EPDM or polychloroprene, and traditional thermoplastic TPVs/TPEs. TPV – 160A provides the performance of vulcanizated rubber with the advantage of low-cost thermoplastic processing. Excellent oil and chemical resistance with a maximum service temperature of 275°F. It is ozone, UV and water resistant as well. This grade is also considered polyolefin.

N75A-E05 is manufactured with elastic properties similar to vulcanized rubber and superior to traditional plastics. It is recyclable and reusable at the point of transformation, with a significant reduction in the weight of the piece and with an evident improvement in the profitability of the processes. It is suitable for the transformation process such as extrusion

MM-PP HE 25 is PP 20% glass-beads by Extrusion Processing

Neoplast™ 155 M/E are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Nevimid 66 A G30 H NATURALE is heat stabilized. Its used in Automotive & Agricolture Consumer Goods.

Cuts UV rays with a stronger emphasis on functionality. Used in sunscreen lotion, cosmetics, and about 80% of plastic products, UV-protection products are now firmly entrenched in the market, and customers tend to be more conscious of functionality. New possibilities for UV absorbers are being explored to respond to changes in people's needs. We are using our flexible ideas and development capacity to our advantage as we target the development of custom-made UV absorbers that will satisfy and please each and every one of our users.

Nevimid 66 A G30 NERO is a Polyamide 66 reinforced with 30% glass fiber, black color. its used in Automotive & Agricolture Consumer Goods

Neoplast™ 163 M/E are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

PGR10 is a PP Glass Filled 10%.

ZF-T20 is a grade of Mineral Filling Polypropylene, which offers good mechanical properties, heat resistance, good resistance to chemical, good dielectric strength, good dimensional stability, superior surface, good flow and processibility. Mineral filler PP is used for automotive parts, housing for electrical appliances, wheel cover, electronic component, mechanical operation parts, toolbox parts, furniture parts, etc.

Global ABS-704 General Purpose High Impact ABS is Poly(Acrylonitrile Butadiene Styrene) thermoplastic.

Nevimid 66 A B30 NATURALE is a Polyamide 66 reinforced with 30% glass beads. its used in Automotive & Agricolture Consumer Goods

Elastoflo 30A-300 (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM.

Using fibers from textile production as raw materials it is possible to produce a range of products considered eco-sustainable and of excellent quality. The bases of textile origin are considered pure, have excellent technical properties, a low specific weight, chemical resistance to solvents (oils, greases and fuels), a very low moisture absorption. Responding to the various needs in the reference sectors, Remid 66 does not in any way compromise the quality of the final products.

Trifilon BioLite® 6 is a hemp fiber reinforced heterophasic copolymer with medium flow properties designed for injection molding. This nucleated polypropylene based biocomposite is designed for high impact applications.

Nylon 6 A1030GFL45 is a glass fiber-reinforced grade with medium viscosity. It is used for injection molding applications.

Dioshy TPU T995NCS is a Thermoplastic Polyurethane with a soft segment compositions of a ether group with well processing abilities, tough and elastic which are suitble to abrasion resistance, oil resistance and can be used when high mechanical properties are needed.

Trifilon BioLite® 22 is a hemp fiber reinforced homopolymer for injection molding. It is designed for medium flow, high strength and stiffness applications.

Polimersan Plastics Polipa (PA 6) is one of the most preferred Polymer due to resistance to bending and wearing, perfect performance balance and low cost.

Poly Chem Alloy PolyFoam 4004CF are additive masterbatch concentrates containing highly specialized chemical blowing agents. This product was specifically created for the production of microcellular foam structures in a variety of thermoplastic materials. PolyFoam products are available containing endothermic blowing agents, exothermic blowing agents, and as a combination of both.