Products in Consumer Goods: UV Stabilized

MOCOM Compounds ALCOM® PC 740/4 UV GY1118-12LD is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and has a translucent, light scattering, and high light diffusion. It is used for automotive and lighting applications such as lamp covers, display elements, and operating elements with approvals of GS93016. The processing injection molding requires a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALCOM® PC 740/4.2 UV GY1076-10LD is a polycarbonate base polymer with a special filler/additive system designed to provide light scattering, high light transmission, and easy flow. It is UV stabilized and is suitable for automotive and lighting applications such as lamp covers, display elements, and operating elements. For best results, the pre-drying conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 h, or 120°C in an air circulating dryer for 4-12 h with a maximum moisture content of <0.02%. The processing injection molding melt temperature should be 270-310°C and the mold temperature should be 80-110°C.

MOCOM Compounds ALCOM® PP 620/6 UV GY1380-05MCO is a gray, metallic, flow line optimized, and UV stabilized polypropylene homopolymer. It is suitable for pre-drying conditions in an air circulating dryer at 80-100°C for 2-4 hours, or in a dry air (dessiccant) dryer at 80-100°C for 2-3 hours, depending on moisture content. For injection molding, a melt temperature of 200-270°C and a mold temperature of 20-70°C are recommended. Typical applications include housings for household goods. To ensure the best performance, it should be kept dry and protected from light, not exceeding 30°C.

MOCOM Compounds ALCOM® PC 740/4 GF20 UV WT1105-13LD is a polycarbonate base polymer containing 20% glass fibers, special filler, and UV stabilizers. It is known for its translucency, light scattering, and high light diffusion, making it ideal for use in automotive and lighting industries for applications such as lamp covers, display elements, and operating elements. This material is processed by injection molding with a melt temperature of 290-320°C and mold temperature of 80-130°C.

MOCOM Compounds ALTECH® PC A 1000/572 UV is a polycarbonate-based polymer with a UV stabilized special feature and a release agent filler/additive system. It is typically used for applications in sport and leisure and should be stored in a dry and protected environment not exceeding 30°C. For processing injection molding, a melt temperature of 270-310°C and a mold temperature of 80-110°C is required. No additional sentence is needed.

MOCOM Compounds ALCOM® PC 740/4 UV CC1269-08LD is a polycarbonate-based material containing a special filler and light scattering, UV stabilized additives. It has GS93016 approval and is suitable for automotive and lighting applications such as lamp covers, display elements, and operating elements. Injection molding should be done at a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALCOM® PC 730/3.1 UV WT1283-09LDM is a polycarbonate-based extrusion grade material with a special filler/additive system containing UV stabilizers, antioxidants, and light scattering properties, resulting in a low gloss finish. It is suitable for use in lighting applications and is typically used for lamp covers. The melt temperature range for extrusion is 240-280°C.

MOCOM Compounds ALTECH® PP-H A 2040/652 GF 40 UV CP is a Polypropylene Homopolymer pre-dried in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours, or an air circulating dryer at 80-120°C for 2-4 hours. It is processed using Injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It contains 40% glass fibers and is chemically coupled, UV stabilized, easy release (demolding), slip agent and heat stabilized. These features make it suitable for machinery, building and construction, and it is typically used for injection molded parts, clothing/fasteners and gardening tools.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 14013 CC1019-14 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized, features high light transmission and light scattering, and is ideal for use in the automotive and lighting market segments. It is suitable for applications such as lamp covers, display elements, and operating elements.

WIC PP 40 BK UV is a black material with UV and heat age stabilization properties intended for use in automotive and sports applications. The base polymer is polypropylene, and it contains 40% carbon fiber as a filler. Prior to processing via injection molding, the material must be pre-dried at 80°C for 2-4 hours, depending on its moisture content, which should not exceed 0.10%. During injection molding, the material should be melted at temperatures ranging from 210 to 260°C, with a mold temperature between 30 and 60°C.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 15091 GY1138-15 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized. It is translucent with good flow properties, and is used in the automotive and lighting market segments for lighting and light transparent components such as lamp covers, display elements, and operating elements. It is approved by GS93016.

MOCOM Compounds ALCOM® LDDC PC 1000 UV 18041 WT1078-12 is a polycarbonate base polymer with a special filler and UV stabilized additive system. It is translucent, providing high light diffusion and good flow, making it suitable for applications in automotive and lighting markets such as lamp covers, display elements, and operating elements. During processing, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C.

MOCOM Compounds ALCOM® LDDC PC 1000 UV BK1044-20 is a polycarbonate-based, injection molding grade resin with a special filler/additive system, good flow, processing stabilized, UV stabilized, and light scattering properties. This resin is used in the automotive and lighting markets for applications such as lamp covers, display elements, and operating elements, and is suitable for black panel-technology and light transparent components. For injection molding processing, the recommended melt temperature is 270-310°C and the mold temperature is 80-110°C. It is recommended to use a low pressure injection molding process.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 16104 WT2288-09TL is a polycarbonate base polymer filled/additive system with UV stabilizers and light scattering special features for the Automotive and Lighting market segments. Its typical applications include lamp covers, display elements, and operating elements, and it has been approved by GS93016. Pre-drying conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 hours and 120°C in an air circulating dryer for 4-12 hours with a maximum moisture content of <0.02%. Processing injection molding should be done at a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 14019 WT1030-14 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and has translucent, light scattering, and high light diffusion characteristics. It is typically used in automotive and lighting applications such as lamp covers, display elements, and operating elements. Injection molding of this polymer requires a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALCOM® PC 740/25 UV WT1445-06LD is a high heat polycarbonate with a special filler/additive system that provides light scattering, high light diffusion, high heat stabilization, UV stabilization, and easy flow. It is typically used for lamp covers, display elements, and operating elements in the automotive and lighting markets. Processing Injection molding should use a melt temperature of 320-340°C and a mold temperature of 100-120°C. The material should be processed immediately after pre-drying for optimal results.

MOCOM Compounds ALCOM® PC 740/4 UV WT1257-04LD is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and features light scattering and high light transmission. It is used in automotive and lighting applications such as lamp covers, display elements, and operating elements, and is approved by GS93016. For optimal performance, injection molding should be done at a melt temperature of 270-310°C and mold temperature of 80-110°C. It is important to follow these instructions.

MOCOM Compounds ALCOM® LD2 MBS 1000 UV 18013 WT1021-18 is a polystyrene copolymer that is translucent, has high light diffusion, light scattering, good flow, processing stabilized, and UV stabilized. It is an injection molding grade suitable for use in the automotive and lighting market segments and is typically used for lamp covers, display elements, and operating elements.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 17030 GY1025-17 is a polycarbonate base polymer containing a special filler/additive system and is UV stabilized. It is suitable for translucent, light scattering, and good flow applications, and is most commonly used in the automotive and lighting market segments for applications such as lamp covers, display elements, and operating elements.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 17004 WT1004-17 is a polycarbonate-based polymer containing a special filler and UV stabilizer for light scattering and high light diffusion. It has a melt temperature of 270-310°C and a mold temperature of 80-110°C. It is approved by GS93016 and is typically used for lamp covers, display elements, and operating elements in the automotive and lighting market segments.

MOCOM Compounds ALTECH® PC A 1000/532 UV AS is a polycarbonate base polymer with antistatic and UV stabilized special features, used for injection molded parts in the electrical and electronic, building and construction, and sport and leisure market segments. Processing injection molding should be done at a melt temperature of 270-310°C and a mold temperature of 80-110°C. It should be stored dry and protected from light, not above 30°C.

MOCOM Compounds ALCOM® PC 740/4 UV RD1207-08LD is a light scattering and UV stabilized polycarbonate with a special filler and a maximum moisture content of <0.02%. It is designed for automotive and lighting applications such as lamp covers, display elements, and operating elements and is approved by GS93016. Injection molding should take place at a melt temperature of 270-310°C and a mold temperature of 80-110°C. Pre-drying conditions should be applied at 120°C in a dry air (dessiccant) dryer for 2-4 h or in an air circulating dryer for 4-12 h to ensure optimal performance.

MOCOM Compounds ALCOM® LD PC 1000 UV 15072 GY1121-15 is a polycarbonate-based polymer with a special filler/additive system that is UV stabilized and translucent, providing high light diffusion and light scattering. It is used in the automotive and lighting market segments for applications such as lamp covers, display elements, and operating elements. It has been approved by GS93016. For processing injection molding, its melt temperature should be between 270-310°C and its mold temperature should be between 80-110°C. All processing conditions should be closely monitored to ensure optimal results.

MOCOM Compounds ALCOM® PC 740/4.12 UV GY1161-11LD is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and offers light scattering, high light transmission, and easy flow characteristics. It is commonly used for applications such as lamp covers, display elements, and operating elements in the automotive and other market segments.

MOCOM Compounds ALCOM® LIR PC 1000 UV 14099 BK1203-14 is a polycarbonate base polymer with a UV stabilized filler/additive system and special features of IR-transparency. It is suitable for applications in the automotive and lighting markets, such as lamp covers, display elements, and operating elements. For processing injection molding, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C. The product should be stored in a dark place.

MOCOM Compounds ALCOM® PC 740/4 UV OR1075-05LD is a polycarbonate base polymer with a special filler/additive system that provides light scattering, high light diffusion, and translucency similar to RAL 2003. It is UV stabilized and approved by GS93016, suitable for automotive and lighting segment applications such as lamp covers, display elements, and operating elements. For injection molding, the suggested melt temperature should be 270-310°C and the mold temperature should be 80-110°C.

MOCOM Compounds ALTECH® ECO PC 1000/141 FR is a polycarbonate base polymer with special features such as UV stabilization, easy release (demolding), and flame retardant impact modification. It is suitable for pre-drying conditions in an air circulating dryer at 100-120°C for 4-12 hours, or 120°C in a dry air (dessiccant) dryer for 2-3 hours, dependent on the moisture content with a maximum moisture content of 0.02%. It can be used for applications in the electrical and electronic, lighting, and various markets such as housings, security engineering parts, sockets, plugs/connectors, and various others.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 15003 CC1005-15 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized, providing high light transmission and light scattering, as well as high light diffusion, dependent on wall thickness and easy flow. It is suitable for automotive and lighting market segments, for applications such as lamp covers, display elements, and operating elements. Processing injection molding requires a melt temperature of 270-310°C and a mold temperature of 80-110°C. This product is approved by GS93016 and should be stored in its original packaging.

MOCOM Compounds ALCOM® CFX ASA 1000 UV 15116 SV1163-15MC is a pre-drying conditions acrylonitrile/styrene/acrylate/copolymer with UV stabilized metallic effect, which has low tendency to flow lines and is easy to flow. It is used in electrical and electronic, building and construction, and sport and leisure applications and is an injection molding grade. The melt temperature for processing injection molding is 240-280°C and the mold temperature is 40-80°C.

MOCOM Compounds ALCOM® PC 740/4.2 UV WT1100-08LD2 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and translucent, light scattering, and has high light diffusion. It has easy flow properties and is suitable for automotive, lighting, and light transparent components. Typical applications include lamp covers, display elements, and operating elements. For processing injection molding, a melt temperature of 270-310°C and a mold temperature of 80-110°C should be used.

MOCOM Compounds ALTECH® ABS A 1000/172 UV is a acrylonitrile/butadiene/styrene/copolymer with good flow, processing stabilized and UV stabilized, suitable for information technology, electrical and electronic and telecommunications applications including display elements, keyboards, and other various applications. For processing, injection molding with a melt temperature of 200-240°C and a mold temperature of 50-80°C is recommended. Pre-drying conditions should be 80°C in an air circulating dryer for 3-6 hours or 80°C in a dry air (dessiccant) dryer for 2-4 hours, depending on moisture content, with a maximum moisture content of 0.20%.

MOCOM Compounds ALTECH® PA6 A 2003/712 GF3 IM UV is a polyamide 6 with a 3% glass fiber filler/additive system. It has been impact modified, fast solidifying, has easy demolding and is UV and processing stabilized. It is suitable for injection molding with a melt temperature of 250-270°C and a mold temperature of 40-80°C and is used in the automotive, machinery, building and construction and sport and leisure market segments. Typical applications include functional components and it should be stored dry, protected from light and not above 30°C.

MOCOM Compounds ALCOM® PC 740/4 UV RD1231-08LD is a polycarbonate containing a special filler system with light scattering and high light diffusion properties, as well as being UV stabilized and having good flow. It is suitable for use in the automotive and lighting market segments and is typically used in applications such as lamp covers, display elements, and operating elements.

MOCOM Compounds ALCOM® ABS 530/29 UV SV1269-05MCS is a UV-stabilized acrylonitrile/butadiene/styrene/copolymer with good flow and a metallic color. It is used in building and construction and sport and leisure markets for domestic appliance housings. For injection molding, it should be melted at a temperature of 220-260°C and molded at a temperature of 50-80°C.

MOCOM Compounds ALCOM® PC 740/4.2 UV WT1090-08LD2 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and has translucent, light scattering, high light diffusion, and good flow properties. It is used in the automotive and lighting market segments for applications such as lamp covers, display elements, and operating elements and is approved by GMW15702 and GM3013.

MOCOM Compounds ALCOM® ASA/PC 540/5 UV GY81-714MCF is a UV stabilized polycarbonate + Acrylonitrile Styrene Acrylate Blend with a metallic color and low tendency to flow lines. It is typically used for housings and is suitable for electrical and electronic, building and construction, and sport and leisure market segments. Pre-drying Conditions for this material are in a dry air (dessiccant) dryer 90-110°C for 2-4 hours, in an air circulating dryer 90-110°C for 4-8 hours depending on moisture content. Processing Injection molding involves using a melt temperature of 260-300°C and a mold temperature of 60-90°C. It is important to note that the material should be dried prior to molding to ensure optimal performance.