Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Electrical Properties
- Processing Information (Injection Molding)
- Rheological Properties
- Injection Moulding Processing Conditions
Under certain conditions the increased thermal conductivity must be considered.
Value | Units | Test Method / Conditions | |
Flexural Modulus | 17800.0 | MPa | ISO 178 |
Flexural Strength | 153.0 | MPa | ISO 178 |
Tensile Modulus | 15500.0 | MPa | ISO 527 |
Tensile Strength | 92.0 | MPa | ISO 527 |
Tensile Elongation at Break | 3.0 | % | ISO 527 |
Impact Strength (Charpy, at 23°C) | 40.0 | kJ/m² | ISO 179/1eU |
Notched Impact Strength (Charpy, at 23°C) | 9.0 | kJ/m² | ISO 179/1eA |
Value | Units | Test Method / Conditions | |
Density | 1130.0 | kg/m³ | ISO 1183 |
Global Warming Potential (GWP) | 1.17 | kg CO₂ eq. | ISO 14040, 14044 |
Value | Units | Test Method / Conditions | |
HDT / A (1.8 MPa) | 156.0 | °C | ISO 75-1/-2 |
DSC (Melt Point) | 160.0 | °C | ISO 11357-1/-3 |
Value | Units | Test Method / Conditions | |
Moisture Content | max. 0.1 | % | - |
Value | Units | Test Method / Conditions | |
Surface Resistance | max. 10 | Ohm | IEC 62631-3-2 |
Specific Volume Resistance | 0.1 | Ohm*m | IEC 62631-3-1 |
Value | Units | Test Method / Conditions | |
Melt Temperature | 210 - 260 | °C | - |
Mould Temperature | 30 - 60 | °C | - |
Value | Units | Test Method / Conditions | |
Melt Index (MVR) | 2.0 | cm³/10min | ISO 1133 |
MVR Temperature | 230.0 | °C | - |
MVR Load | 5.0 | kg | - |
Molding Shrinkage (parallel) | 0.1 | % | ISO 294-4, 2577 |
Molding Shrinkage (normal) | 0.1 | % | ISO 294-4, 2577 |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- 80°C in an air circulating dryer for 2-4h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light.