Products in Agricultural Films: Polypropylene Homopolymer (HPP)

Neviprop 040 TL40 NERO is a Homopolymer polypropylene filled with 40% talc. its used in Automotive & Agricolture Consumer Goods

DuPure R 01 NP is a non-pelletized polypropylene homopolymer (produced with a phthalate-free catalyst) supplied in the form of unstabilized free flowing powder. The spherical shape and narrow particle size distribution (with low fines content) makes DuPure R 01 NP very suitable for mixing with additives, fillers and color pigments/concentrates.

XM6950K delivers in granules, white and is a homopolymer.

DuPure T 01 NP is a non-pelletized polypropylene homopolymer (produced with a phthalate-free catalyst) supplied in the form of unstabilized free flowing powder. The spherical shape and narrow particle size distribution (and low fines content) makes DuPure T 01 NP very suitable for mixing with additives, fillers and color pigments/concentrates.

INNO-COMP INNOPOL® CS 1-5810 T20 is a 10% glass fiber reinforced and 20% tac filled polypropylene homopolymer compound. This grade is available in natural and custom colored form.

Semi-crystalline thermoplastic with high Rigidity and very good chemical resistance. PP-H exhibits compared to other plastics has a low density and is a very good one electrical insulator. For sliding applications is PP-H not suitable due to wear and tear.

Innopol® CS 1-1120 EX BU is developed for producing injection molded components for compound. This grade is available in black and custom colored form.

INNOPOL® CS 3-7120 is a 20% talc-filled polypropylene compound. This grade is available in nature and custom colored form.

Moplen HP562T is a Polypropylene homopolymer resin for spunbond fiber

COPYLENE® CH005 is a fractional melt flow polypropylene homopolymer resin available in pellet form. It is made with a non-phthalate catalyst.

Osterman & Company Inc. Osterlene® PPH35F is used in food packaging film, heavy duty packaging, absorbtion & filtration, filament yarn, furniture & buildings, IBCs, geotextile & agriculture, hygiene nonwoven, protective clothes, wipes/tissues.Osterlene PPH35F is a very high melt flow polypropylene homopolymer resin designed for fiber spinning.Osterlene PPH35F meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

PETOPLEN EH341 is a homopolymer polypropylene resin with narrow molecular weight distribution. The material is produced by controlled rheology (CR) technology. It is suitable for very high speed spunbond fiber production and general purpose injection molding.

Polifil® GFPPCC series compounds are homopolymer polypropylenes reinforced with chemically coupled glass fibers. These compounds offer superior strength and stiffness, improved elevated temperature performance, better creep resistance, higher impact strength and higher resistance to high temperature water than conventional glass fiber reinforced polypropylenes. Polifil® GFPPCC products are UL94 HB rated. These compounds are used in chemical resistance applications, appliances, electrical components, automotive, irrigation and utility products. Standard processing techniques are applicable. Use this information as a guide to aid you in selecting the proper resin for your application. TPG will custom compound and fine-tune our formulations for your application.

Moplen HP561R is a Polypropylene homopolymer resin for spunbond fibers

INNO-COMP Innopol® CS 1-3130 GF5 GU is a 5% glass-fiber reinforced and mineral filled polypropylene homopolymer compound. This grade is available in nature and custom colored form.

INNOPOL® CS 1-4140 AP is a 40% talc-filled polypropylene homopolymer compound. This grade is available in nature and custom colored form, as well.

INNOPOL® CS 1-6820 MA is a 20 % glass fiber filled polypropylene homopolymer compound. This grade is available in nature and custom colored form.

RG 1002 N is a Polypropylene Homopolymer With High Stiffness. It is used in High Stiffness Thermoformed Parts, Special Extrusion Applications

Innopol® CS 1-3000 DEL is a polypropylene homopolymer based compound. This grade is available in nature and custom colored form as well.

RG 1001 M is a Polypropylene Homopolymer With High Stiffness and Stabilization. It is used in High Stiffness Injection Molded Parts, Special Extrusion Applications

RG 1002 G is a Polypropylene Homopolymer With High Stiffness. It is used in High Stiffness Thermoformed Parts, Special Extrusion Applications

PETOPLEN EH251 is a homopolymer polypropylene resin with narrow molecular weight distribution. The material is produced by controlled rheology (CR) technology. It is suitable for high speed injection molding and general purpose fiber extrusion applications.

Polifil® GFPPCC series compounds are homopolymer polypropylenes reinforced with chemically coupled glass fibers. These compounds offer superior strength and stiffness, improved elevated temperature performance, better creep resistance, higher impact strength and higher resistance to high temperature water than conventional glass fiber reinforced polypropylenes. Polifil® GFPPCC products are UL94 HB rated. These compounds are used in chemical resistance applications, appliances, electrical components, automotive, irrigation and utility products. Standard processing techniques are applicable. Use this information as a guide to aid you in selecting the proper resin for your application. TPG will custom compound and fine-tune our formulations for your application.

Polifil® GFPPCC series compounds are homopolymer polypropylenes reinforced with chemically coupled glass fibers. These compounds offer superior strength and stiffness, improved elevated temperature performance, better creep resistance, higher impact strength and higher resistance to high temperature water than conventional glass fiber reinforced polypropylenes. Polifil® GFPPCC products are UL94 HB rated. These compounds are used in chemical resistance applications, appliances, electrical components, automotive, irrigation and utility products. Standard processing techniques are applicable. Use this information as a guide to aid you in selecting the proper resin for your application. TPG will custom compound and fine-tune our formulations for your application.

RG 1002 L is a Polypropylene Homopolymer With High Stiffness. It is used in High Stiffness Thermoformed & Injection Molded Parts, Special Extrusion Applications

Polifil® GFPPCC series compounds are homopolymer polypropylenes reinforced with chemically coupled glass fibers. These compounds offer superior strength and stiffness, improved elevated temperature performance, better creep resistance, higher impact strength and higher resistance to high temperature water than conventional glass fiber reinforced polypropylenes.

INNO-COMP Innopol® CS 1-3120 OL is a 20 % talc filled compound based on polypropylene homopolymer. This grade is available in nature and custom colored form.

DuPure U 01 NP is a non-pelletized polypropylene homopolymer (produced with a phthalate-free catalyst) supplied in the form of unstabilized free flowing powder. The spherical shape and narrow particle size distribution (with low fines content) makes DuPure U 01 NP very suitable for mixing with additives, fillers and color pigments/concentrates.

RG 1040 N is a Polypropylene Homopolymer Contains Nucleating Agent and Shows a Good FLowability and Stiffness. It is used in High Stiffness Thermoforming Applications

COPYLENE® CH014 is a polypropylene homopolymer resin designed for extrusion applications. It is made with a non-phthalate catalyst.

RG 1002 H is a Polypropylene Homopolymer With High Stiffness. It is used in High Stiffness Thermoformed Parts, Special Extrusion Applications

RG 1040 K is a Polypropylene Homopolymer Contains Nucleating Agent With High Stiffness and mechanical Strength. It is used in High Stiffness Thermoforming Applications

RG 1084 K is a Polypropylene Homopolymer for High Transparency Extrusion and Thermoforming Applications. It is used in Thermoformed Cups for Diary Products, Desserts and Etc.

RG 1001 P is a Polypropylene Homopolymer With High Stiffness and antiGasfading With Stabilization. It is used in High Stiffness Injection Molded Parts, Special Extrusion Applications

INNOPOL® CS 1-4610 FR is a flame retarded polypropylene homopolymer compound. This grade is available in nature and custom colored form.

DuPure G 01 NP is a non-pelletized polypropylene homopolymer (produced with a phthalate-free catalyst) supplied in the form of unstabilized free flowing powder. The spherical shape and narrow particle size distribution (with low fines content) makes DuPure G 01 NP very suitable for mixing with additives, fillers and color pigments/concentrates.