Products

Barrier-Grip R5701H is a water-based product provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle.

MICROSERE® 5806A is a high-melt, amber-colored microcrystalline that is used in a variety of applications.

MICROSERE® 5715A is a high quality microcrystalline wax ideally suited for laminating applications in foodstuffs and general purpose packaging. Laminates produced show excellent initial seal strength, good resistance to aging and are resistant to strike through at high ambient temperatures.

INTERFLO® 66 is a high melting point hydrocarbon wax which is used as an efficient and economical external lubricant for extrusion of rigid polyvinyl chloride. The addition of minor amount to the compound in conjunction with lubricants improves the processability and also the appearance of the finished product.

PARAFFLEX® 4625A is a specialty formulation of petroleum waxes suitable for the manufacture of scented pillar, votive and other molded candles.

IGI® 1260A is a fully refined paraffin wax.

Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon the protection required. Typical dilution is 1:1 with water.

IGI® 1250A is a fully refined paraffin wax.

ACCULIN® 400 is a low melting point polyethylene.

IGI® 2281A is a specially selected grade of white crude scale wax possessing good flexibility as well as high gloss on air cooling. IGI® 2281A is ideal for use in container candles or as a coating wax for vegetables.

MICROSERE® 5999A is an amber-colored microcrystalline wax with hard consistency and a high melting point.

MICROSERE® 5799A is a laminating-grade, mid-melt, microcrystalline wax that is used in a variety of applications.

IGI® 1303A is a fully refined high-melt paraffin wax that is used in a variety of applications including: hot-melt adhesives, investment casting, rubber products, and textiles.

EVACOTE® 7089A is a specialty formulation of petroleum waxes and polymers suitable in consistency to be utilized as a sealant and coating for fertilizer applications.

ACCULIN® 1000 is a hard, high melting point polyethylene. ACCULIN® 1000 is sold in micronized form.

ASTORLITE® J50 is a soft, white, opaque wax specially designed for jar/container candles. Its cohesive strength and low shrinkage allow it to adhere to the container. Jar/container candles can be made with a single filling with no top-off necessary.

This product is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. For general purpose application other than corrugated, the product can be used without dilution.

IGI® 1230A is a fully refined paraffin wax.

PARAFFLEX® 4630A is a soft, smooth and creamy looking blend specially formulated for single pour container candles.

MICROSERE® 5871A is a light-colored, high-melt, microcrystalline wax that is used in a variety of applications.

ACCULIN® 600 is a hard, low melting point polyethylene.

ACCULINOL® 425 is a 425 Mw polyethylene alcohol.

MICROSERE® 5910A is a high-melt, microcrystalline wax that is used in a variety of applications including; plastics, adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles.

PETAX® 0386A is white, odorless petrolatum of medium consistency (hardness) and fiber length. PETAX® 0386A complies with the requirements for the “White Petrolatum” set by the United States Pharmacopeia (USP).

Barrier-Grip 9471A provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle.

MICROSERE® 5890A is a white, high-melt, microcrystalline wax that is used in a variety of applications. MICROSERE® 5890A complies with the requirements for “Microcrystalline Wax” set by the United States Pharmacopeia (USP) / National Formulary (NF).

ACCULIN® 1000 is a hard, high melting point polyethylene.

Barrier-Grip 9471B is a water-based product provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle.

EVACOTE® 7292A is a premium multi-component formulation having good barrier properties against both water and moisture vapor. Its low viscosity might assist in achieving better machinability for application.

ACCULINOL® 700 is a 700 Mw polyethylene alcohol.

ACCULIN® 1500 is an extremely pure, inert, narrow melt point product that exhibits very specific expansion behavior.

Aquaban® 9009A is a water-based treatment for paper and corrugated board. It imparts a high level of water repellence.

IGI® 1239A is a fully refined wax with a mid-range melting point.

Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimizing the performance of the functional coatings.

IGI® 1297A is a fully refined paraffin wax with excellent heat stability.

IGI® 6046A is a specialty formulation for use in container candles