Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Overview
- ECP 592 Permanently Conductive Graphene Hybrid Clear Acrylic Coating Aerosol
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Application
In lighting , windows, clear covers and lids, displays etc. Supplied as an aerosol for ease of application.
Properties
- Physical Properties
Value Units Test Method / Conditions Coverage 6 - 8 m²/litre - Density 1.1 g/cm³ - Drying Time (Full) 12 hours - Drying Time (Touch) 20 Minutes - Light Transparency 87 % - Recommended Dry Film Thickness 20 micron - Static Decay max. 2 Seconds IEC TC15 Surface Resistivity (at 2 thou / 50 microns) max. 10⁷ ohms/sq ASTM D257
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Method of Use
Surface Preparation: All contaminants must be removed from the surface. Mark areas that do not require coating. A suitable primer may be necessary on certain substrates such as Polyethylene and Polypropylene etc such as ECP 500UP.
Application: One or two passes are normally required to give optimum thickness and surface resistivity values depending on the degree of transparency required. Supplied as a 400 ml aerosol
Safety & Health
- Precautions
- Highly Flammable - Keep away from sources of ignition. No smoking. Keep away from heat, sparks and open flames. Keep all containers closed when not in use.
- Use under well-ventilated conditions, personal respiratory protection should be worn during spraying conditions. Such devices must be used in accordance with the manufacturer's instructions.
- Avoid contact with skin, wear protective gloves and clothing. Wash thoroughly with soap and water after use. If accidentally swallowed, seek medical advice.