TBA Protective Solutions ECP 573/JSF180/4124 Permanently Conductive Transparent Graphene Hybrid Acrylic Paint

ECP 573/JSF180/4124 Permanently Conductive Transparent Graphene Hybrid Acrylic Paint sprayable acrylic paint. It is a single component permanently conductive clear acrylic coating that provides effective static elimination for electronics safe handling area and explosive atmosphere applications. Fully compliant with BS EN 61340- 5.1:2007 and ATEX. It contains carbon nanotubes, a graphene derivative.

Product Type: Conductive Coating

Features: Conductive

Application Area: Electrical Components

Application Method: Spray

Chemical Family: Acrylics & Acrylates

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Features & Benefits

Ready-to-Use Product Features
Overview
ECP 573/JSF180/4124 Permanently Conductive Transparent Graphene Hybrid Acrylic Paint sprayable acrylic paint

Applications & Uses

Markets
Applications
Application Area
Application Method
Applications

Lighting, windows, clear covers and lids, displays etc.

Properties

Physical Properties
ValueUnitsTest Method / Conditions
Coverage6 - 8m²/litre-
Density1.1g/cm³-
Drying Time (Full)12hours-
Drying Time (Touch)20minutes-
Light Transparency85%-
Recommended Dry Film Thickness20micron-
Static Decaymax. 2secondsIEC TC15
Surface Resistivity (at 2 thou / 50 microns)max. 10⁷ohms/sqASTM D257

Regulatory & Compliance

Certifications & Compliance

Technical Details & Test Data

Directions for Use

Surface Preparation: All contaminants must be removed from the surface. Mark areas that do not require coating. A suitable primer may be necessary on certain substrates such as Polyethylene and Polypropylene etc such as ECP 500UP.

Mixing and Application: Reduce 2:1 by volume with supplied thinners, conventional spray equipment should be used.  A gun pressure of 28-35 psi is recommended. One or two passes are normally required to give optimum thickness and surface resistivity values, depending on the degree of transparency required.  We also recommend using a cup filter. 400 ml aerosol is also available.

Safety & Health

Precautions
  • Highly Flammable - Keep away from sources of ignition.  No smoking.  Keep away from heat, sparks and open flames.  Keep all containers closed when not in use.
  • Use under well-ventilated conditions, personal respiratory protection should be worn during spraying conditions.  Such devices must be used in accordance with manufacturers instructions.
  • Avoid contact with skin, wear protective gloves and clothing.  wash thoroughly with soap and water after use.  If accidentally swallowed, seek medical advice.