TBA Protective Solutions ECP 536 Highly Conductive Flexible Polyurethane Coating

Enhanced TDS

Chemical Family: Polyurethanes (PU)
Product Type: Conductive Coating
Technologies: Ready-to-Use Products
Product Families: Ready-to-Use Products — Paints & Coatings
Protective Coatings

Markets: Electrical & Electronics
Applications: Electrical & Electronics — Packaging & Assembly
Electronics Coatings
Application Area: Electrical Components
Compatible Substrates & Surfaces: Elastomers & Rubbers,
Fibers & Fabrics,
Leather,
Plastics

Technical Data


	Value	Units	Test Method / Conditions
Coverage (Dependent on Substrate)	approx. 10	sq.m/litre	-
Dry Film Thickness	10 - 15	micron	-
Elongation	approx. 500	%	-
Finish	Low gloss	-	-
Flash Point	40	°C	-
Maximum VOC Content	0.8	kgs/ltr	-
Surface Resistivity	max. 10⁵	ohms/sq	-
Wet Film Thickness	50	micron	-

Application

ECP 536 is generally applied directly to a clean and grease-free substrate.
Thinners may attack some plastics, trial before applying. ECP 536 is thinned with approx. 15-30% thinners (ECP 536/2681) for spraying or 10% thinners for brushing.
ECP 536 is an air-drying coating that is touch dry in approximately 5 minutes at 200°C, hard dry in 20 minutes with full properties in around 1 hour.
ECP 536 can be cross-linked with a special isocyanate hardener, ECP 536 Pt. B, using approximately 10% by weight. The hardener is supplied separately and should be added immediately prior to using the paint. Pot life is approximately 8 hours. Cross-linking confers improved toughness, weathering and chemical resistance but at the expense of flexibility and conductivity.