TBA Protective Solutions ECP 502 JSF023 EMI Shielding Nickel Acrylic Paint

Surface Preparation: All contaminants including mold release, grease and dirt must be removed. Mask areas that do not require coating. A suitable primer may be necessary on certain substrates such as Polyethylene Polypropylene etc.

Mixing and Application: Care must be taken to ensure the concentrate is thoroughly mixed to ensure all the solids are in suspension.

Spray Coating: ECP 502/JSF023 may settle out and regular agitation is recommended during spray application. The paint should be diluted with thinner ECP 502/JSF024 to suit local spray conditions. Typically 2 parts of concentrate to 1 part thinners can be used in a conventional gravity feed spray gun or, alternatively, a pressure pot with an agitator. A gun Pressure of 30 psi is recommended. Two passes are normally required to give the optimum thickness and surface resistivity values.

Brush Coating: Brush coat from the can, or thin to suit the application.

• Highly Flammable - Keep away from sources of ignition - No Smoking (S16). Keep away from heat, sparks and open flames. Keep all containers closed when not in use.
• Use Under Well Ventilated Conditions - Do not breathe vapor (S23). Harmful by inhalation (R20). In case of insufficient ventilation - wear suitable respiratory equipment (S38), such devices must be used in accordance with the manufacturer’s instructions. For excessive vapor inhalation, remove to fresh air and summon medical attention.
• Avoid Contact With Skin And Eyes (S24/25) - In case of skin contact, wash with soap and water, dry and apply work cream. Eye contact - flush with water for at least 15 minutes and seek medical attention. If accidentally swallowed, summon medical attention.