Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Mechanical Properties
Value Units Test Method / Conditions Tensile Stress (Break, Type I, 5 mm/min) ¹¹ 49 MPa ASTM D638 Tensile Strain (Break, Type I, 5 mm/min) ¹¹ 0.6 % ASTM D638 Tensile Modulus (at 5 mm/min) ¹¹ 13500 MPa ASTM D638 Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹ 75 MPa ASTM D790 Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹ 15600 MPa ASTM D790 Tensile Stress (Break, 5 mm/min) ¹¹ 53 MPa ISO 527 Tensile Strain (Break, 5 mm/min) ¹¹ 0.6 % ISO 527 Tensile Modulus (at 1 mm/min) ¹¹ 14000 MPa ISO 527 Flexural Stress (Yield, at 2 mm/min) ¹¹ 73 MPa ISO 178 Flexural Modulus (at 2 mm/min) ¹¹ 13500 MPa ISO 178 - Physical Properties
Value Units Test Method / Conditions Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹ 0.1 - 0.2 % ISO 294 Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹ 0.1 - 0.3 % ISO 294 Density ¹¹ 1.75 g/cm³ ISO 1183 Water Absorption (at 23°C, 24hrs) ¹¹ 0.01 % ISO 62-1 Water Absorption (at 23°C, 24hrs) ¹¹ 0.01 % SABIC method - Thermal Properties
Value Units Test Method / Conditions Heat Deflection Temperature (at 0.45 MPa, 3.2 mm) ¹¹ 275 °C ASTM D648 Heat Deflection Temperature (at 1.82 MPa, 6.4 mm, Unannealed) ¹¹ 258 °C ASTM D648 Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹ 0.0000132 1/°C ASTM E831 Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹ 0.000025 1/°C ASTM E831 Thermal Conductivity (through-plane, 60*60*3mm plaque) ¹¹ 1.30E+00 W/m-K ISO 22007-2 Thermal Conductivity (in-plane, 60*60*3mm plaque) ¹¹ 18 W/m-K ISO 22007-2 Thermal Conductivity (through-plane, 10*10*3mm sample) ¹¹ 3.5 W/m-K ASTM E1461-07 Thermal Conductivity (in-plane, 25*0.4mm disc) ¹¹ 15 W/m-K ASTM E1461-07 Coefficient of Thermal Expansion (at -30°C to 80°C, flow) ¹¹ 0.000013 1/°C ISO 11359-2 Coefficient of Thermal Expansion (at -30°C to 80°C, xflow) ¹¹ 0.0000239 1/°C ISO 11359-2 Coefficient of Thermal Expansion (at 23°C to 80°C, flow) ¹¹ 0.0000138 1/°C ISO 11359-2 Coefficient of Thermal Expansion (at 23°C to 80°C, xflow) ¹¹ 0.0000244 1/°C ISO 11359-2 Ball Pressure Test (at 163°C to 167°C) ¹¹ Pass - IEC 60695-10-2 Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹ 231 °C ISO 75/Af Relative Temperature Index (Electrical) ᵖ ¹¹ 130 °C UL 746B Relative Temperature Index (Mechanical with impact) ᵖ ¹¹ 130 °C UL 746B Relative Temperature Index (Mechanical without impact) ᵖ ¹¹ 130 °C UL 746B - Electrical Properties
Value Units Test Method / Conditions Surface Resistivity ¹¹ min. 2.5E+04 Ω ASTM D257 Comparative Tracking Index (UL, PLC) ¹¹ 4 PLC Code UL 746A Hot Wire Ignition (PLC 0) ¹¹ min. 1.2 mm UL 746A - Impact Properties
Value Units Test Method / Conditions Izod Impact (Unnotched, at 23°C) ¹¹ 70 J/m ASTM D4812 Izod Impact (Notched, at 23°C) ¹¹ 24 J/m ASTM D256 Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹ 7 kJ/m² ISO 180/1U Izod Impact (Notched, 80*10*4, at 23°C) ¹¹ 3 kJ/m² ISO 180/1A - Injection Molding
Value Units Test Method / Conditions Drying Temperature ⁷ 120 - 150 °C - Drying Time ⁷ 4 Hrs - Melt Temperature ⁷ 320 - 350 °C - Front - Zone 3 Temperature ⁷ 315 - 345 °C - Middle - Zone 2 Temperature ⁷ 315 - 345 °C - Rear - Zone 1 Temperature ⁷ 315 - 345 °C - Mold Temperature ⁷ 110 - 150 °C - Back Pressure ⁷ 0.3 - 0.7 MPa - Screw Speed ⁷ 60 - 100 rpm - Shot to Cylinder Size ⁷ 50 - 75 % - - Flame Characteristics
Value Units Test Method / Conditions UL Recognized (94V-0 Flame Class Rating) ᵖ min. 1.2 mm UL 94 Glow Wire Ignitability Temperature (at 1.0 mm) ʳ ᵖ 850 °C IEC 60695-2-13 UV-light (Water exposure/immersion) ᵖ F1 - UL 746C - Note
- ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
- ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
- ʳ UL Ratings shown on the technical datasheet might not cover the full range of thicknesses, colors and regions. For details, please see the UL Yellow Card.
- ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Regional Availability