Products

SYNTHEMUL® PX-702 is a acrylic hard thermoplastic resin in MMA

BECKOSOL® 12-901 is an alkyd resin, soyabean oil chain-stopped, in xylol

KELSOL® 3961-B2G-75 is a water-dispersible, chain-stopped alkyd designed to give excellent corrosion resistance in addition to a very fast dry rate

BECKOSOL AQ 205 is a medium oil alkyd latex based on bio-renewable oils that combines good through-cure speed with positive tack-free surface dry. BECKOSOL AQ 205 requires no coalescing solvent for film formation and produces AIM compliant coatings that develop the performance of traditional solvent-borne products. BECKOSOL AQ 205 does not contain alkyl phenol ethoxylates.

FINE-CLAD® M-8710 is a carboxyl-functional polyester designed to cure with bisphenol-A type epoxy resins at a 70/30 polyester to epoxy ratio for TMA-free hybrid systems.

UROTUF® F77-M-60 is a one-package, ASTM Type I oil-modified urethane based on linseed oil, which cures by oxidation at ambient temperatures in the presence of metallic driers.

SYNTHEMUL® 40-412 is a multipurpose, carboxylated-acrylate, emulsion polymer. It offers excellent film build, superior wet adhesion and high gloss.

EPOTUF® 38-411 is an epoxy ester resin based on EPOTUF® epoxy resin 37-004, supplied at 50% solids in xylene

EPOTUF® 37-618 is a solution of 37-615, a polyamide curing agent based on dimerized fatty acids and polyethylene amines for room temperature curing of EPOTUF® solid epoxy resins.

EPOTUF® 37-100 epoxy resin is a medium viscosity, 100% reactive, diluted liquid epoxy resin containing EPOTUF® 37-051.

BECKOSOL® 90-185 is a high-solids, short-oil, non-drying, coconut-oil alkyd supplied at 80% non volatile in methyl propyl ketone and n-butyl acetate.

KELSOL® 580-W-42 is a water dispersion alkyd resin which cures rapidly whether air dried or baked, with or without melamine or urea crosslinkers. It offers excellent dip and spray properties and rapid air dry. *This product contains less than 2% HAP solvent.

EPOTUF® 38-690 is an epoxy ester solution which, when neutralized with an organic amine, can be formulated into VOC-compliant, water-based primers and enamels for air dry and bake applications

EPOTUF® 37-601 is a modified cycloaliphatic amine adduct based on isophorone diamine intended for room temperature curing of EPOTUF epoxy resins.

BECKOSOL® 12-102 is a chain-stopped alkyd to be used as a single resin or in combination with other resins.

UROTUF F90-E3M-55 is a soybean oil modified urethane resin provided at 55% solids in a blend of low aromaticMineral Spirits and volatile methyl siloxane (exempt).solvent

BECKOSOL® 15-105 is a castor oil alkyd resin designed mainly for non oxidative air dry industrial enamels, pigment dispersion, 2 component clears, NC Lacquers.

EPOTUF® 38-406 is an epoxy ester resin supplied at 60% solids in mineral spirits.

RESAFEN® 13-027 is a liquid cresilic resin designed mainly for inner can coating

BECKOSOL® 2575-T-60 is a short coconut alkyd resin solution for use as a baking vehicle in combination with melamine resins or as a plasticizer for nitrocellulose, butyrate, or vinyl lacquers.

SYNTHEMUL® ATP 105 is a acrylic thermoplastic resin in Xylene and Toluene blended.

AMBERLAC® 13-038 is a vinyl toluene-modified alkyd supplied in VM&P Naphtha.

UROTUF® L57-MPW-35 is an anionic stabilized dispersion of an aliphatic urethane polymer provided at 35% solids in a blend of N-methyl pyrrolidone and water.

BECKOSOL® VPW 2037-100 is a modified long oil alkyd based on linseed oil.

BECKOSOL® 11-090 is a medium oil soya alkyd supplied at 60% non-volatile in VM&P naphtha.

AROPLAZ® 15-143 is an oil free saturated polyester resin recommended to formulate coil and can coatings and industrial finishing.

KELSOL® 15-173 is a chemically modified, linseed oil supplied in butoxy ethanol. It contains no water as supplied, but can be diluted with water without the addition of a neutralizer

AMBERLAC® 4400 is a styrene modified alkyd resin, designed for industrial enamels

BECKOSOL® 12102-E2 is a short TOFA chain-stopped alkyd supplied in a blend of tertiary butyl acetate, n-butyl acetate and Aromatic 100 solvents.

AROLON® 15-1044-XBLF is a thermosetting acrylic resin, acrylamide type

BECKOSOL® 6440-A4-85 is a medium-oil, chain-stopped alkyd designed for durable, high-solids, air-dry, industrial and maintenance coatings.

FINE-CLAD® M-8023 is a general purpose, hydroxyl-functional polyester. It is designed to cure by urethane crosslinkers.

FINE-CLAD® M-8711 is a carboxyl-functional polyester designed to cure with bisphenol-A type epoxy resins at a 70/30 polyester to epoxy ratio for TMA-free hybrid systems.

AROPLAZ® 15-173 is a saturated polyester alkyl modified recommended to formulate polyurethane and melamine crosslinkable industrial finishes.

EPOTUF 37-143 is an aqueous dispersion of a liquid Bisphenol‑A epoxy resin which when combined with EPOTUF water-borne curing agents can be used to formulate compliant, room temperature cured, two-component, water-borne epoxy coatings.

EPOTUF® 37-127 is a low viscosity 100% reactive diluted liquid epoxy resin based on Bisphenol A and which contains EPOTUF® 37-058 (C12 - C14 glycidyl ether).