R&P POLYPLASTIC Armlen

Armlen PP GF MD 30-1 is a 30% glass fiber, thermostabilized, hydrolysis resilient polypropylene. This material displays high mechanical, thermophysical and dielectric properties; is resilient to cold and hot water, alkali, acids, detergents (acetone, spirits etc.), and benzene fumes. This material is compliant with Europesecurity requirements. Designed for injection molding of items and parts for wide solutions range: construction, electronics, auto industry, machine engineering, aviation, fire safety equipment, household, transportation etc. Including products exploited outdoor in natural light, precipitation and other weather factors. Available in light-gray color.

Armlen PP TPE-10-70A is a mineral filled thermoplastic elastomer, based on styrenic block copolymers, contains modifying additives, heat and light stabilizers. Displays high resistance to rigid environments and polar solvents (ether, acetone, spirit), atmosphere and ozone-resistant. Approved for application with edibles and potable war: hot and cold. Designed to replace technical rubbers. Unlike rubber, may be exposed to frequent recycling and dying with super concentrates in the process of products manufacture. Available in natural and light-gray color.

Armlen PP MD 20-1 is a 20% mineral filled polypropylene. This material displays high mechanical properties, low buckling and shrinkage parameters, it may be applied as substitution of metals, thermosetting polymers and other thermoplastics (polyamides, polyester, ABS plastics) in technical products, including those exploited in chemically aggressive conditions, and general items. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation, camping equipment and etc. Available in black color.

Armlen PP E/P 15-2LS is a impact modified, light-stabilized polypropylene. This material displays high resistance to impact, including impacts in low temperature environment; high elasticity, frost-resistance and resistance to alternating loads. Designed for bumper manufacture and number of car lining parts, available for further dye with enamels. Available in natural, black, natural, light-gray, gray and graphite.

Armlen PP E/P 15-3 is a impact modified composite material. Designed for molding of exterior parts for automobiles: bumpers, fairing etc.), items for technical purposes. Available in black color.

Armlen PP E/P 20-2 is a elasticized, frost resistant composite material. Designed for molding of bodywork for electrical and general goods. Available in natural and black colors.

An elasticized polypropylene. This material displays a high resistance to impact, including impacts in a low temperature environment; high elasticity, frost-resistance and resistance to alternating loads. Designed for manufacture of exterior parts for automobiles. Available in black colors.

An impact modified, light-stabilized polypropylene. This material displays a high resistance to impact, including impacts in a low temperature environment; high elasticity, frost-resistance and resistance to alternating loads. Designed for bumper manufacture and a number of car lining parts, available for further dye with enamels. Available in black, natural and graphite.

Armlen PP E/P 20-5M is a modified composite material. This material displays high elasticity to impact loads, including whilst exploitation in negative temperatures; high elasticity; resistance to frost and alternating loads. Designed for molding of bumpers and other automobile exterior details, including those for further dye with enamels. Available in natural and black colors.

Armlen PP GF 20-1EX is a 20% glass fiber, extrusion, random-static polypropylene copolymer. Designed for extrusion of mid-layer in glass fiber reinforced polypropylene pipes (hot and cold water supply system, central heating system, industrial systems; PPR/PPR+GF/PPR). Available in natural, red, green, blue and gray colors.

A 20% glass fiber random-statocopolymer, extrusion material. The recipe of this polypropylene composition obtains a sufficient and optimal range of technical characteristics that avail it to be applied in polypropylene pipes (three layers glass fiber reinforced).

A 20% glass fiber, extrusion, random-static polypropylene copolymer with 5% mineral additive

Armlen PP GF 20-2LS is a 20% glass fiber, light-stabilized polypropylene. This material displays high mechanical, thermophysical and dielectric properties; material is resilient to hot and cold water, to nonpolar solvents and rigid environments (kerosene, gasoline, benzene etc.) and alkali and acids. Exploitation benefits: improved impact strength, heat- and cold-resistance, good appearance. Designed for injection molding of items and parts for wide solutions range: construction, electronics, auto industry, machine engineering, aviation, fire safety equipment, household, transportation etc. Available in gray color.

Armlen PP GF 25-1IM is a 25% glass fiber, impact modified polypropylene. This material displays high mechanical, thermophysical and dielectric properties; material is resilient to hot and cold water, to nonpolar solvents and rigid environments (kerosene, gasoline, benzene etc.) and alkali and acids. Designed for injection molding of items and parts for wide solutions range: construction, electronics, auto industry, machine engineering, aviation, fire safety equipment, household, transportation etc. Available in black color.

Armlen PP GF 30-1EX is a 30% glass fiber, extrusion, random-static polypropylene copolymer.

Armlen PP GF 30-3 is a 30% glass fiber polypropylene. This material displays high mechanical and thermal properties, it may be applied as substitution of metals, thermosetting polymers and other thermoplastics (polyamides, polyester, ABS plastics) in technical products and speciality electronic goods. Designed for injection molding manufacture of various items. Available in white and red colors.

Armlen PP GF 30-5HS is a 30% glass fiber, thermostabilized polypropylene. This material displays high mechanical and thermal properties; it may be applied as substitution of metals, thermosetting polymers and other thermoplastics in technical products and speciality electronic goods. Designed for injection molding manufacture of various items.

50% chemically coupled glass fiber filled polypropylene, heat stabilized, black colored, for structural part application.

Armlen PP MD 10-1 is a 10% mineral filled polypropylene. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation, camping equipment etc. Available in green color.

A 10% mineral filled, light-stabilized polypropylene. Designed for manufacture of lawn grates. Available in black, green and brown colors.

Armlen PP MD 15-1FR is a 15% mineral filled polypropylene. This material displays high mechanical and electrical properties; low-combustibility; self-attenuates after the ignition source is exterminated; is resilient to mineral oils, alkali, acids, benzene fumes. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation, camping equipment and etc. Available in black color.

Armlen PP MD 40-11TS is a 40% mineral filled, thermostabilized polypropylene. This material displays high mechanical and electrical properties; is resilient to cold and hot water, alkali, acids and detergents, organic polar solvents (acetone, spirits etc.), benzene fumes. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation, camping equipment and etc. Available in white color.

A 40% mineral filled, thermostabilized polypropylene. This material displays high resilience to impact, good rigidity, dimensional stability. This material is compliant with European safety requirements. Available in white color.

A 40% mineral filled, modified polypropylene. This material displays high resilience to impact loads even amid negative temperatures (up to -30°C), and dimensional stability. This material is food and beverage compliant. Available in white color.

Armlen PP MD 40-4M is a 40% mineral filled polypropylene. Designed for injection molding of items and parts for wide solutions range: construction, electronics, auto industry, machine engineering, aviation, fire safety equipment, household, transportation etc. Including products exploited outdoor in natural light, precipitation and other weather factors. Available in natural color.

Armlen PP MD 40-5TS is a 40% mineral filled thermos-stabilized polypropylene. This material displays high resistance to impact loads, good rigidity, and dimensional stability. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation, camping equipment etc. Available in white color.

A 40% mineral filled, thermostabilized, polypropylene gomopropilen. This material displays high resilience to impact loads, good rigidity and dimensional stability. This material is compliant with European security requirements. Available in white color.

Armlen PP MD 40-8.1TS is a 40% mineral filled, thermostabilized, polypropylene gomopropilen. This material displays high mechanical, thermophysical and dielectric properties; is resilient to cold and hot water, alkali, acids, detergents (acetone, spirits etc.), and benzene fumes. This material is compliant with Europesecurity requirements. Designed for injection molding of items and parts for wide solutions range: construction, electronics, auto industry, machine engineering, aviation, fire safety equipment, household, transportation etc. Including products exploited outdoor in natural light, precipitation and other weather factors. Available in gray color.

Armlen PP MD 45-10D is a 45% mineral filled, impact modified, thermostabilized polypropylene. This material displays improved quality and gloss, improved mechanical, thermophysical and dielectric properties; resilient to cold and hot water, solvents, alkalis and acids, and detergents. Designed for injection molding of various items and parts of technical and general appliances. Available in white and light-gray color.

Armlen PP MD 50-2TS is a 50% mineral filled thermostabilized material, compliant with Europesecurity requirements. Designed for molding of bodywork for electrical and general goods. Available in white and gray colors.

Armlen PP MD 50-5TS is a 50% mineral filled thermos stabilized polypropylene. Designed for injection molding of various parts and items for technical and household appliances. Available in natural color.

A 10% mineral filled, low-combustible, extrusion polypropylene.

Impact modified 10% mineral filled polypropylene composite material for and interior and exterior trims. UV-stabilized. Can be colored-in-mass.

Armlen PP MF 15-1FR is a 15% mineral filled low-combustible polypropylene. This material displays high mechanical properties, low buckling and shrinkage parameters, it may be applied as substitution of metals, thermosetting polymers and other thermoplastics (polyamides, polyester, ABS plastics) in technical products, including those exploited in chemically aggressive conditions, and general items. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation and etc. Available in natural, white, light-gray, black and graphite.

Armlen PP MF 15-3FR is a 15% mineral filled, low-combustible polypropylene. This material is compliant with Restriction 2002/95/ЕС. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation and etc. Available in natural and black colors.

Armlen PP MF 20-2 is a 20% mineral filled material. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation etc. Available in black color.