Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Composite Materials Functions
- Technologies
- Product Families
Applications & Uses
- Markets
- Applications
Properties
- Typical Properties
Value Units Test Method / Conditions Surface Resistance 10^13 Ohm IEC 93 fibre length 25 mm PA 3.01 heat distortion temperature min. 200 °C ISO 75-2° surface weight 4 g/m2 ISO 10352 fibre mass Content 30 % ISO 1172 Flexural strength 200 N/mm2 ISO 14125 tracking resistance CTI 600 level IEC 112 Specific volume resistance 1014 Ohm x cm IEC 93 Flexural modulus 10 N/mm2 ISO 14125 dielectric strength 20 KV/mm IEC 243-1 Water absorption 50 mg ISO 62 Curing Time 76 sec ISO 12114/1 Specific Density 181 g/cm3 ISO 1183 A Shrinkage 9 % ISO 2577 impact strength 87 KJ/m2 ISO 179 low oxygen index 42 % ISO 4589 - Flammability
Value Units Test Method / Conditions Flammability V 0 (3,2) - -
Storage & Handling
- Handling and Storage
- Storage condition store dry at max
- 25 °C and out of direct sun light
- Molding time 30 sec
- /mm
- Molding pressure 80 - 120 bar
- Molding temperature 135 - 155 °C