ENYDYNE® I 68871 A

ENYDYNE® I 68871 A - Unsaturated polyester resin in styrene,DCPD. It is mainly used in hand lay up and spray up,injection molding,RTM etc.

Brand: ENYDYNE (33 products)

Polymer Name: Polyester (unspecified)

Chemical Family: Polyesters, Unsaturated Polyester (UPE)

Processing Methods: Resin Transfer Molding (RTM)

End Uses: Pipes, Tanks

Technical Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Chemical Family: Polyesters,
Unsaturated Polyester (UPE)
Polymer Name: Polyester (unspecified)
Composite Materials Functions: Resins, Binders & Matrix Materials
Technologies: Composite Materials
Product Families: Composite Materials — Polymers & Resins
Thermoset Resins

Properties

Color

Typical Properties


	Value	Units	Test Method / Conditions
Solid Content	56 - 60	%	MT-CU001C
Specific weight at 20°C	1,12	g/cm3	-
Brookfield Viscosity at 23°C, sp 2 rpm 50	130 - 170	mPa.s	MT-CU023V
Gel Time	65 - 85	minutes	MT-CU151R
Exothermic peak	85 - 105	°C	MT-CU151R
Reactivity at 23°C	+ 0,15 DMA + 3	&	MEKP50
Peak (23°C)	95 - 115	-	-

Cured Properties


	Value	Units	Test Method / Conditions
Flexural strength	90	MPa	ISO 178 (2011)
Curing Cycle at 23°C (at 100°C)	24 (1)	hr	-
Tensile strength	53.2	MPa	ISO 527 (2012)
Tensile Modulus	3720	MPa	ISO 527 (2012)
Elongation at break	1.7	%	ISO 527 (2012)
Flexural modulus	3400	MPa	ISO 178 (2011)
HDT	87	°C	ISO 75 -2A (2013)
Volemetric Shrinkage	7.2	%	-

Storage & Handling

Shelf Life: 6 Months (23°C in Dark )
Storage and Shelf Life: Store in the shade, out of direct sunlight. Keep storage temperature below 25°C. Unseal container just before use. Shelflife will be reduced reaching higher temperature.