Products

OPTIM® P-445 is a maleic anhydride modified homopolymer polypropylene. The grafting operation of the polypropylene backbone is achieved using a new technology that allows high grafting efficiency and low polymer scission.

OPTIM® E-131 is a maleic anhydride modified very low density polyethylene. It is used for toughening of Polyamides such as Nylon-6 & Nylon 6, 6. It gives excellent mechanical properties at sub-zero conditions.

OPTIM® E-156 is a maleic anhydride modified high density polyethylene. It is used for a variety of applications where adhesion improvements or compatibilsation is required.

NOVIS P-390 is a free radical modifier for polypropylene melt flow index. It is specifically used to improve the MFI of highly filled PP compounds.

OPTIM® E-151 is a maleic anhydride modified polyethylene with additional ester groups. It is used as compatibilizer between polar and non-polar polymers. It also acts as coupling agent to improve adhesion of mineral fillers and polymer matrix.

ADNYL® E-170 is a polymeric alloy of nylon and maleic anhydride grafted polyethylene. It is extensively used as a high softening point toughening agent for PA6.

BindEX E-188 is a maleic anhydride modified metallocene based linear low density polyethylene adhesive resin. It can be processed within different extrusion and co-extrusion technologies designed to process polyolefins. Due to its high MFI it has easy processability in cast film applications.

savE® HS15N is an inorganic phase change material.

savE® FS03 is form stable phase change material, liquid PCM embedded in polymer matrix.

OPTIM® P-425 is a maleic anhydride modified homopolymer polypropylene. The grafting operation of the polypropylene backbone is achieved using a new technology that allows high grafting efficiency and low polymer scission.

OPTIPET™-213M is a chain extender that can react with the chains of recycled PET scrap and restore its original properties.

savE® OM08 is an inorganic phase change material.

savE® HS01 is an inorganic phase change material.

savE® FS30 is form stable phase change material, liquid PCM embedded in polymer matrix.

savE® FS65 is form stable phase change material, liquid PCM embedded in polymer matrix.

OPTIM® E-119 is a maleic anhydride modified linear low density polyethylene. It is used to improve adhesion of HFFR fillers such as Magnesium Hydroxide [Mg(OH)2] & Alumina Trihydrate (ATH) and the polymer matrix.

savE® HS18N is an inorganic phase change material.

OPTIM® P-401 is a maleic anhydride modified homopolymer polypropylene. The grafting operation of the polypropylene backbone is achieved using a new technology that allows high grafting efficiency and low polymer scission.

savE® HS24 is an inorganic phase change material.

savE® OM65 is an inorganic phase change material.

OPTIM® E-132 is a maleic anhydride modified low density polyethylene. It is used for toughening of Polyamides such as Nylon-6 & Nylon 6, 6. It gives excellent mechanical properties at sub-zero conditions.

savE® OM18 is an inorganic phase change material.

BindEX E-187 is a ready-to use tie resin to adhere barrier layer such as Nylon 6, Nylon 66 and EVOH with layers of PE or co-polymer of PP in a multilayer co-extruded structure made using blown film process. It is based on anhydride functionalized, Polyolefin. It is designed to be used as such, without dilution.

OPTIM® R-642 is a maleic anhydride modified Styrene Ethylene Butylene Styrene. It is a type of Polar Thermoplastic Elastomer offering good elasticity at low temperatures.

savE® HS72 is an inorganic phase change material.

savE® HS89 is an inorganic phase change material.

savE® OM35 is an inorganic phase change material.

savE® OM46 is an inorganic phase change material.

BindEX E-165 is a modified linear low density polyethylene adhesive resin designed for use in adhesive film for making Aluminum Composite Panels (ACP). The chemical modification provides excellent adhesion to both polyethylene and aluminum substrates. It is preferably used as outer layer in 3- layer coextruded blown film structure. It is this layer which faces aluminum sheet during lamination process. It can be processed on normal extruders used for processing of polyethylenes.

reCoupp® E-832 is a maleic anhydride modified speciality grade linear low density polyolefin, using advanced anhydride grafting technology. This grade is specifically designed to fulfill the need for rendering multilayer barrier films recyclable into film making again besides molding applications. Appropriate combination of base resin and functional groups in the material provides excellent tie-layer functionality between Nylon 6, Nylon 66, or EVOH, with variety of polyolefin grades used in barrier films for different packaging applications.

savE® FS21R is form stable phase change material, liquid PCM embedded in polymer matrix.

savE® OM30 is an inorganic phase change material.

OPTIM® E-152 is a maleic anhydride modified polyethylene with additional ester groups. It is used as compatibilizer between polar and non-polar polymers. It also acts as coupling agent to improve adhesion of mineral fillers and polymer matrix.

savE® OM32 is an inorganic phase change material.

OPTIM® E-142 is a maleic anhydride modified linear low density polyethylene. It is used for toughening of Polyamides such as Nylon-6.

savE® HS10N is an inorganic phase change material.