Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts

Perma USA Food Grade Grease H1 SF10

Food grade grease H1 SF10 was especially developed for the food processing and pharmaceutical industry. This lubricant fulfills the requirements of food products and associated ancillaries and complies with the “guidelines of sec. 21 CFR 178.3570 of FDA regulations”. It has been authorized by the NSF for use in federally inspected meat and poultry plants (NSF-H1). Food grade grease H1 SF10 shows good anti-wear properties, water resistance and corrosion protection as well as a high aging and oxidation stability.

Product Type: Grease, Oil

Application Area: Bearings, Cams, Pneumatic Cylinders

Features: Corrosion Resistant, Food Grade, Improved Ageing Resistance, Low Temperature Strength, Oxidation Resistant, Wear Resistant

Thickener Type: Aluminum Complex

Technical Data SheetSafety Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Base Oil Type
Polyalphaolefin (PAO)
Product Type
Grease,
Oil
Thickener Type
Aluminum Complex
Technologies
Ready-to-Use Products
Product Families
Ready-to-Use Products — Fluids & Lubricants
Greases

Features & Benefits

Ready-to-Use Product Features
Corrosion Resistant,
Food Grade,
Improved Ageing Resistance,
Low Temperature Strength,
Oxidation Resistant,
Wear Resistant
Advantages for your Applications
  • Synthetic
  • Good stability when working at low temperature allowing the grease to still provide good wear protection
  • Can be used in automatic Lubrication system
  • Good water resistance
  • High aging and oxidation stability
  • Good corrosion protection
  • NSF-H1 registration

Applications & Uses

Markets
Automotive & Transportation,
Industrial
Applications
Automotive & Transportation — Automotive
Powertrain & UTH
Industrial — Chemical & Industrial Manufacturing
Equipment & Parts
Automotive & Transportation — Lubricants & Functional Fluids
Automotive Fluids & Lubricants
Application Area
Bearings,
Cams,
Pneumatic Cylinders
Application

Used for machines and equipment in the foodprocessing and pharmaceutical industry, particularly for Lubrication points that may have incidental and technically unavoidable contact with the food product. However, we recommend using Food grade grease H1 SF10 at all Lubrication points, in order to avoid problems due to lubricant contamination. This special grease lubricates rolling and sliding bearings, lifting cylinders, joints, guide bars, cams, etc.

Application Information

Before substituting other greases with Food grade grease H1 SF10, the bearings have to be cleaned and greased. If the greases are miscible, the grease can be exchanged by means of reLubrication.

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Base OilPAO--
ThickenerAluminium-complex--
Base Oil Viscosity (40 °C)150.0mm²/sDIN 51562
Lower Service Temperature-45 / -49°C/°F-
Upper Service Temperature120 / 248°C/°F-
Speed Factor (n x dm)Approx. 500 000 mm/minmm/min-
NLGI Grade1.0-DIN 51818
Worked Penetration (25 °C, Lower Limit Value)310 x 0.1mmDIN ISO 2137
Worked Penetration (25 °C, Lower Limit Value)340 x 0.1mmDIN ISO 2137
Flow Pressure of Lubricating Greasesmax.1 400mbarDIN 51805, Test temperature: -45 °C
Density (20 °C)Approx. 0.89g/cm³-
Drop Pointmin.250°CDIN ISO 2176
TextureHomogeneous--
Colour SpaceBeige--

Regulatory & Compliance

Certifications & Compliance
FDA 21 CFR 178.3570,
NSF H1
Quality Standards
FDA 21 CFR 178.3570

Packaging & Availability

Packaging Type
Cartridges,
Pails
Packaging

Lubrication systems

  • Cartridge 400 g
  • Pail 1 kg
  • Pail 5 kg

Storage & Handling

Shelf Life

Shelf life is approx. 12 months if the product is stored in its unopened original container in a dry and frost-protected place.