Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Fluids & Lubricants Functions
- Technologies
- Product Families
Features & Benefits
- Fluids & Lubricants Features
Applications & Uses
- Markets
- Applications
- Compatible Base Stocks
- Fluids & Lubricants Type
- Fluids & Lubricants End Use
- Properties and Applications
- improves anti-wear properties of mineral and synthetic oils
- application of the product in the amount of 2% in mineral oil brings a reduction in the diameter of the defects in the four-ball test by up to 50%, compared to the base oil without additions
- application of the product in the amount of 2% in PAO brings a reduction in the diameter of the defects in a four-ball test, approx 40%, compared to the base oil without additions
- application of the product in the amount of 2% in POE brings a reduction in the diameter of the defects in the four-ball test by over 30%, compared to the base oil without additions
- compatible with other anti-friction additives (phosphoric, sulfuric and chlorine ones), which provides good surface protection in sliding contact of materials
- does not cause corrosion and staining of metals (in contrast to widely used sulphated and chlorinated AW / EP additives)
- is compatible with a wide range of oil additives
- it is safe for human health
- obtaining oils with better anti-wear and anti-friction properties and extending the life of the equipment
- reducing corrosion, compared to oils containing standard AW / EP additives based on sulfur or chlorine
- can be used in a package with other additives for oils
- increasing safety during production and use of oils
- industrial oils hydraulic oils, compressor oils, turbine oils, gear oils
- automotive oils gear oils
- Applications
AW/EP additive for mineral oils and polyester or poly-α-olefin based oils. Product is recommended for industrial gear oils, compressor oils, turbine oils, high temperature lubricants, metal working fluids, hydraulic fluids.
Properties
- Physical Form
- Appearance
- Clear Liquid at 20/25°C
- Typical Properties
Value Units Test Method / Conditions Flash Point min. 230 °C - Acid Value max. 0.1 mg KOH/g - Water content max. 0.1 % (w/w) - Phosphorous Content 7.9 % - Kinetic Viscosity at 40°C 41.4-50.6 mm2/s - Density at 25°C 1.13-1.18 g/ml - TPP Content max. 2.5 % -
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards