Products

EXOfos PB-136 is an anionic surfactant that belongs to the group of phosphorous esters. This ester is based on tridecyl alcohol ethoxylate and offered in acidic form. In room temperature, the product is provided in the form of clear or lightly murky liquid. The product has acid value ranging from 90 to 150 mg KOH/g and low pour point, i.e. below -20°C.

Chemax polyethylene glycols are available in a range of molecular weights which find utility as lubricants, chemical intermediates and heat transfer agents.

ROKAnol NL5 is a non-ionic surfactant from the group of ethoxylated alcohols (INCI name: C9-11 Pareth-5). The product belongs to the ROKAnol NL series based on C9-C11 synthetic alcohol. The high surface activity of these compounds is used in detergents and cleaning agents. The commercial product contains about 100% of the active substance and takes the form of a clear or turbid liquid, solidifying at a temperature below 0°C.

SULFOROKAnol L270/1 (Sodium Laureth Sulfate) is an anionic surfactant from the group of alkyl ether sulfates (INCI name: Sodium Laureth Sulfate). It is based mainly on raw material of natural origin. The product is available as a liquid paste, colorless to light yellow, and has a concentrated form - a 70% aqueous solution, which reduces transport and storage costs. The product does not contain any preservatives. SULFOROKAnol L270/1 shows complete solubility even in hard water.

Surmax® CS-586 is an alkaline stable surfactant that imparts high foaming characteristics in liquid cleaner concentrates.

ROKAnol IT9 is a non-ionic surfactant of the group of ethoxylated fatty alcohols (INCI name: Isotrideceth-9). The product is part of a large group of surfactants based on isotridecyl alcohol, iso-C13. ROKAnol IT9 contains about 100% active substance. It is a liquid with the consistency of oil or paste.

ROKAnol T18 belongs to non-ionic surfactants from the group of ethoxylated fatty alcohols, INCI name: Ceteareth-18. The product is based on high molecular alcohol of natural origin. It is produced in the form of white wax. ROKAnol T18 has excellent emulsifying and dispersing properties. The hydrophilic-lyophilic balance (HLB) value of the product is 16.3, which places it in the group of hydrophilic emulsifiers.

Chemfac PB-184 is widely used as an oil soluble lubricants additive, rust inhibitor and emulsifiers in the metal working industry.

Rokryl TW1 is a stabilized, aqueous dispersion of acrylic acid derivatives polymerization products. It is a white, milky liquid, miscible with water in any proportion, which facilitates application of the product. Rokryl TW1 is used as an auxiliary in the textile industry for inner-side gluing of fabric and non-woven and non-woven bonding using the padding method.

ROKAmid KAD/2A is a non-ionic surfactant with the INCI name ‘Cocamide DEA’. It is based on natural vegetable oils. It has a form of a clear or slightly turbid light-yellow to yellow liquid. ROKAmid KAD/2A is one of the most common co-surfactants, which has a range of very interesting application properties. Most of all, it is used as a rheology modifier, that is a thickener which improves consistence by creating so-called mixed micelles. Among other KAD series ROKAmides, it shows improved thickening properties compared to the ROKAmid KAD or KAD/1A. When mixed with anionic surfactants, it increases and stabilizes the quality of foam. ROKAmid KAD/2A is very effective even at a low concentration.

SyncoPol GT1050 is a glycerine based polyether polyol with hydroxyl value in range 155-165 mgKOH/g and molecular weight ~1050 g/mol. The product has low viscosity in range 200-600 cPs at 25°C and functionality ~3.0. SyncoPol GT1050 is a multifunctional polyether polyol designed as an intermediate for the production of polyurethane Coating, Elastomers, Sealant Application and OCF foam.

ABSNa 50 belongs to the group of anionic surfactants and is the sodium salt of alkyl benzene sulfonic acid with a concentration of 50%. The product is in the form of concentrated paste, which translates into economic benefits, for example in the case of using the product for the production of washing powders.

Chemfac phosphate esters exhibit a variety of properties including emulsification, lubrication, cleaning, and wetting. Due to the presence of phosphorous, some of the Chemfac products show excellent extreme pressure (EP) properties in addition to conventional lubricity properties. Certain Chemfacs also exhibit corrosion inhibiting properties when neutralized with amines.

SULFOSUCCINATE DOSS70GP is an anionic surfactant with a concentrated active substance content (70%) in propylene glycol (INCI name: Diethylhexyl Sodium Sulfosuccinate). It is a surfactant with limited water solubility. Due to its unique molecular structure, the product has a strong wetting effect on highly hydrophobic materials such as anthracite carbon.

ROKAnol IT7 is a non-ionic surfactant from the group of ethoxylated fatty alcohols (INCI name: Isotrideceth-7). The product belongs to the ROKAnol IT series, forming a large group of surfactants based on isotridecyl alcohol (C13). The product contains about 99% of the active substance.

ROKAcet K7 (PEG-7 Cocoate) is a non-ionic surfactant belonging to the group of polyoxyethylene fatty acid esters (INCI name: PEG-7 cocoate). This surfactant occurs in the form of a clear or slightly cloudy liquid, ranging in color from straw to light brown and with a solidification point of about 0°C.

POLIkol 600 belongs to the group of polyoxyethylene glycols (PEG with an average molecular weight of 600). The product is available as a high viscosity liquid or a soft white paste. POLIkol 600 is characterized by a wide range of application properties. It has excellent softening, lubricating, solubilizing and moisturizing properties, as well as good antielectrostatic effect and strong hygroscopic properties.

EXOdis PC40A is a polymer anionic dispersant intended for paint products. It is supplied in the form of 40% aqueous solution of ammonium salt of polyacrylic acid. The product is a clear or lightly murky yellow liquid.

ROKAmid KAD/1A (Cocamide DEA) is a non-ionic surfactant (INCI name: Cocamide DEA). The product has slightly better thickening properties compared to ROKAmid KAD. It is produced from natural vegetable oils. It is available in the form of a clear or slightly cloudy liquid with a light yellow to yellow color.

Chemfac phosphate esters exhibit a variety of properties including emulsification, lubrication, cleaning, and wetting. Due to the presence of phosphorous, some of the Chemfac products show excellent extreme pressure (EP) properties in addition to conventional lubricity properties. Certain Chemfacs also exhibit corrosion inhibiting properties when neutralized with amines.

Chemax polyethylene glycols are available in a range of molecular weights which find utility as lubricants, chemical intermediates and heat transfer agents.

Chemax CO-40 is commonly used as an emulsifiers and co-emulsifiers in lubricants and softener formulas.

Chemax polyoxyethylated fatty acids are used as emulsifiers and lubricants additives in metal lubricants, textile lubricants, and cosmetic formulations. They are also used as emulsifiers in defoamers and as viscosity control agents in plastisol formulations.

ROKAnol T12 belongs to the group of non-ionic fatty alcohol ethoxylate surfactants, INCI name: Ceteareth-12. The product is based on the high molecular weight alcohol of natural origin. It is produced in the form of a soft white wax.

PCC Chemax Caustic soda lye 25% solution is an inorganic chemical compound of the hydroxide group, belonging to the strongest alkali. In liquid form it is a colorless, odorless and non-flammable product called caustic soda liquid. It belongs to a group of basic raw materials, so it is used almost in every industry.

POLIkol 4500 flakes is a product belonging to the group of polyoxyethylene glycols (PEG with an average molecular weight of 4500), INCI name: PEG-100. The commercial product is available as white to light yellow wax. The solidification point of the product is approximately 55 °C. The product is freely soluble in water, low aliphatic alcohols, ethyl ether and chloroform.

Rostabil DDPP is an alkyl-aryl phosphite in the form of a clear, homogeneous liquid with a characteristic, delicate fragrance. It is used as a process stabilizer in plastics processing. It prevents degradation of polymer materials providing thermal and process protection. The use of Rostabil DDPP stabilizer eliminates the effect of yellowing of materials. It significantly enhances the color stability of pigment-containing materials and provides transparency to non-pigmented products.

The nonionic surfactant used as a semi-finished product of receiving textile preparation.

Rostabil TTDP is a specialist additive for plastics used as a process stabilizer. It is available in the form of a homogeneous liquid with a characteristic, delicate fragrance. It prevents degradation of polymer materials during processing. Provides thermal protection of polymers, eliminating the effect of yellowing of finished products. Strengthens the color stability of materials containing pigments and provides transparency of non-pigmented products.

ABS acid is an anionic surfactant of the alkylbenzene sulfonate group, in acid form. Due to its acidic form, the product is available with an active content of more than 96%. ABS acid is a light brown to dark brown liquid. Thanks to the concentrated form, it is very cost-effective in terms of reducing transport costs.

EXOdis PC40 is an anionic polymer dispersant intended for paint products. It is provided in the form of 40% aqueous solution of sodium salt of polyacrylic acid. The product is clear or lightly murky yellow liquid.

Surmax®CS-521 is used in highly alkaline systems to impart exceptional cleaning, and low foaming properties at temperatures of < 60° C (140° F).

SyncoPol DL1001 is a medium molecular weight polyether diol used in a wide variety of polyurethane applications ranging from elastomers, coatings and adhesives to prepolymers and blends for rigid foam systems. SyncoPol DL1001 is a clear liquid of molecular weight 1000 g/mol with low viscosity in range 120-180 cPs at 25°C, hydroxyl value 107-117 mgKOH/g, functionality ~2.0.

PCC Chemax MPEG 1000 is a high molecular weight product that belongs to methoxy polyoxyethylene glycols. The product is intended mainly for the construction industry. The average molecular weight is 1000 g/mol. The product is a white solid. The compound is a polymer with high solubility in water and a slight odor. The active substance content in the product is about 100%.

Chemeen polyoxyethylated fatty amines are mildly cationic surfactants that become more nonionic in nature with increasing ethylene oxide content. These surfactants are substantive to metals, glass, textiles, plastics, and clays. They are used as emulsifiers and lubricants additives in metal and textile lubricants, antistats for textiles and plastics, textile dyeing assistants, detergents in degreaser formulations, and corrosion inhibitors in numerous applications.

ROKAfenol N14 is a non-ionic surfactant which belongs to the group of ethoxylated nonylphenols (INCI name: Nonoxynol-14). It is used as an ingredient of washing and cleaning products and as an emulsifier.