Products

P & P Technology AS-SCS001 CONDUCTIVE SILICONE CAULK is an electrically conductive composite material comprising of silicone elastomer and silver plated copper particles. It is designed to be easily applied to panel joints &seams and/or the small clearances that result from non-continuous mechanical fixing in sheet metal enclosures. On application it cures at room temperature to form a highly conductive elastomeric section / joint that has good adhesion to most commonly used metals &substrates. When fully cured it will prevent water ingress and improve the EMI shielding performance of panel joints &overlaps.

P & P Technology Expanded Neoprene is a non-conductive gaskets.

P & P Technology ECF-Q are constructed from silicone containing metal powder fillers which combine to produce high levels of attenuation with excellent environmental shielding and a high level of conductivity. Many types of filler, from nickel graphite to pure silver, are available to suit a wide range of applications. There are also Fluorosilicone variants for use in the presence of hydrocarbon contamination. The Conductive Silicone Range was originally developed for high performance shielding mainly for military applications. However, the introduction of lower cost llers has now made them accessible to the commercial sector. They are used where environmental and EMI screening is required but space constraints or stringent environmental protection necessitates a small cross section prole, often tted into a groove or channel.

P & P Technology Fire Retardant Nickel Graphite Silicone EC-Q-FR has good resistance to heat, moderate chemicals & oils, sea water, acids, fats, greases, many solvents & ozone. It also has good flame retardant properties.

P & P Technology Silicone Sheet is madeof fine cellular construction composed mainly of non-interconnecting cells and isnormallyan off-white color.

P & P Technology Carbon Loaded Silicone EC-C which when properly catalyzed can be considered for applications requiring conductivity such as EMI gaskets, conductive sheaths for ignition cable core, electronic keyboard contacts, etc.

P & P Technology Neoprene Sponge are constructed from silicone containing metal powder fillers which combine to produce high levels of attenuation with excellent environmental shielding and a high level of conductivity. Many types of filler, from nickel graphite to pure silver, are available to suit a wide range of applications. There are also Fluorosilicone variants for use in the presence of hydrocarbon contamination. The Conductive Silicone Range was originally developed for high performance shielding mainly for military applications. However, the introduction of lower cost llers has now made them accessible to the commercial sector. They are used where environmental and EMI screening is required but space constraints or stringent environmental protection necessitates a small cross section prole, often tted into a groove or channel.

P & P Technology SE515FR UL94V0 is a non-conductive gasket.

P & P Technology Black Nickel Graphite Silicone ECB-Q is a black silicone elastomer with a nickel / graphite conductive filler.

P & P Technology Nickel Loaded Silicone EC-N is available as sheeting, profileextrusions,jointed rings, self-adhesive backed, strip and die-cut. They are particularly suited to use inhigh temperature seals and gaskets, where a soft easily deformable rubber is required and where public safety is critical.

P & P Technology SE510FR UL94V0 is available as sheeting, profileextrusions,jointed rings, self-adhesive backed, strip and die-cut. They are particularly suited to use inhigh temperature seals and gaskets, where a soft easily deformable rubber is required and where public safety is critical.

P & P Technology Silver Copper Loaded Silicone EC-H is a silicone elastomer with Silver conductivefiller. It is tan in color.

P & P Technology Silver Aluminum Loaded Fluorosilicone ECF-J is a silicone elastomer with a silver / aluminum conductive filler.

P & P Technology Fire Retardant Nickel Graphite ES-Q-FR is a conductive silicone.

P & P Technology Nickel Loaded Fluoro Silicone ECF-N are constructed from silicone containing metal powder fillers which combine to produce high levels of attenuation with excellent environmental shielding and a high level of conductivity. Many types of filler, from nickel graphite to pure silver, are available to suit a wide range of applications. There are also Fluorosilicone variants for use in the presence of hydrocarbon contamination. The Conductive Silicone Range was originally developed for high performance shielding mainly for military applications. However, the introduction of lower cost llers has now made them accessible to the commercial sector. They are used where environmental and EMI screening is required but space constraints or stringent environmental protection necessitates a small cross section prole, often tted into a groove or channel.

P & P Technology Silicone Sponge is a fluorosilicone elastomer with a silver / aluminum conductive filler.

P & P Technology Silver Aluminum Loaded Silicone EC-J a fluorosilicone elastomer with a silver / copperconductive filler.