Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Carrier
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- Patented chemistry
- Water based
- Chrome free
- Thin dry-film
- Metallic silver appearance
- Non-electrolytic
- Characteristics and Performance
- Introduces no hydrogen embrittlement.
- Excellent assembly and multi-tightening behavior (in combination with specialized PLUS® topcoats).
- The coefficient of friction can be adjusted to targeted values ranging from 0.06 to 0.20 with specialized Plus® topcoats (ISO 16047).
- Mechanically damage resistant (Test Method D24 1312, USCAR 32).
- Superior chemical resistance (VDA 621-421).
- Bimetallic compatibility with aluminum.
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Application Process
- Geomet® 720 can be applied by Dip-Spin, Spray, Dip-Drain-Spin using bulk or rack.
- The process of applying Geomet® requires the substrate to be clean bare steel -- free of oil, heat-treat scale, rust and other contaminants.
- Dip Spin is widely used bulk processing system for small parts.
- Spray for specialized parts or large parts typically one half pound or larger.
- Dip Drain spin for large parts such as tubes.
- Parts are subjected to a five minute minimum pre-cure at 200°F to set the coating, followed by a higher temperature at 625°F for a complete cure.
Properties
- Color
- Appearance
- Metallic Silver
- High Corrosion Resistance
Coating Thickness Salt Spray Test (ISO 9227/ASTM B117 > 24 g/m² > 1000 hours without white rust
> 24 g/m² + topcoat > 1500 hours without white rust
- Results may vary depending on substrate, geometry of parts and type of application processes.
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Health and Safety
- Complies with REACh requirements.
- Aqueous dispersion system.