Nils Malmgren AB

About Us

"Nils Malmgren AB is located since 1967 in Ytterby just outside Kungälv on the west coast of Sweden. We have a wide spectra of epoxy products for most applications. If You can not find the information You are looking for, do not hesitate to contact us. Quality has always been our motto. Already in 1990 Nils Malmgren AB was certified (Certificate No. 12) as the first manufacturer of products based on epoxy resin and its hardener systems. Today, we are quality certified according to ISO 9001. That means everything from purchasing to sales are controlled and documented procedures."

View All Products

Browse Products by Market

Industrial

16 products

Browse Products by Technology

Composite Materials

16 products

Most Viewed Products

View All Products

Nils Malmgren AB NM BG 31 banner

Nils Malmgren AB NM BG 31

NM BG 31 is a solvent free epoxy resin with fillers. NM BG 31 is used as a glue to get adhesion between green and old concrete. The adhesion between the concrete layers will be approximately twice the tensile strength of the concrete.

Nils Malmgren AB NM Infusion 664 banner

Nils Malmgren AB NM Infusion 664

Polymer Name:Epoxy Resins & Compounds
Chemical Family:Epoxy & Epoxy Derivatives
Processing Methods:Vacuum Infusion Processing (VIP)
End Uses:Mold Making

NM Infusion 664 is an extremely low viscosity epoxy system, suitable for all kind of infusion processes. The system is based on the latest development within the epoxy technology, which means that the low viscosity can be combined with a high Tg (glass transition temperature) even at room temperature curing. Wetting and adhesive properties are very good to all kind of fibers.

Nils Malmgren AB NM Afterglow 257 banner

Nils Malmgren AB NM Afterglow 257

NM Afterglow 257 is a solvent free epoxy-based after glowing product. After glowing products are mainly used as guidelines for escape-routes. The product can be applied as lines, dots or direction arrows.

Nils Malmgren AB NM Laminating 3070 banner

Nils Malmgren AB NM Laminating 3070

Polymer Name:Epoxy Resins & Compounds
Chemical Family:Epoxy & Epoxy Derivatives
End Uses:Mold Making

NM Laminating 3070 / H2962 is designed to be used when there are high demands of heat-resistance. Laminates with NM Laminating 3070 / H2962 should first gel at +40°C, that will take about 2 hours and then be post-cured at +150°C. Full cure will take place in approx. 4 hours at +150°C.

Nils Malmgren AB NM Gelcoat 230 banner

Nils Malmgren AB NM Gelcoat 230

Chemical Family:Epoxy & Epoxy Derivatives
Functions:Surface Finish
End Uses:Mold Making
Color:White

NM Gelcoat 230 is a white solvent free epoxy system designed for surface coats on molds.

Nils Malmgren AB NM Resin 094 banner

Nils Malmgren AB NM Resin 094

Polymer Name:Epoxy Resins & Compounds
Chemical Family:Epoxy & Epoxy Derivatives
End Uses:Mold Making

NM Resin 094 together with NM Hardener 093 C is a low viscosity epoxy resin for manufacturing of sand molds and laminates. The resin can be accelerated with up to 10% of NM Accelerator 254. At increased amounts of accelerator, potlife and exotermic are affected. When having large molds, the accelerator should not be added.

Nils Malmgren AB NM Gelcoat 095 C banner

Nils Malmgren AB NM Gelcoat 095 C

Chemical Family:Epoxy & Epoxy Derivatives
Functions:Surface Finish
End Uses:Mold Making

NM Gelcoat 095C with NM Hardener 101 is a metal powder filled epoxy resin with a low coefficient offriction. NM Gelcoat 095C is designed as a surface resin for molds where there are high demands on durability and lack of pores.

Nils Malmgren AB NM El Epoxi 960 banner

Nils Malmgren AB NM El Epoxi 960

Polymer Name:Epoxy Resins & Compounds
Chemical Family:Epoxy & Epoxy Derivatives
End Uses:Mold Making

NM El Epoxy 960/980 is a two component low-viscosity epoxyresin for casting and impregnation. Theresin is colored dark blue. The air-release when casted is normally very good, but encapsulation of coils might need use of vacuum.

Nils Malmgren AB NM Laminating 380 A banner

Nils Malmgren AB NM Laminating 380 A

Polymer Name:Epoxy Resins & Compounds
Chemical Family:Epoxy & Epoxy Derivatives
End Uses:Mold Making

NM Laminating 380 A is a very low viscosity epoxy resin specially designed for good wetting and adhesion to glass-carbon-polyester- and aramide fibers. NM Laminating 380 A shall gel at room temperature or just above. Full cure at 60°C, 24 hours.The low viscosity makes NM Laminating 380 A suitable for injection.

View All Products (20)

View All Products