company tower banner

WIC PP 40 BK

WIC PP 40 BK is a black material with heat-age stabilization properties intended for use in automotive and sports applications. The base polymer is polypropylene, and it contains 40% carbon fiber as a filler. Prior to processing via injection molding, the material must be pre-dried at 80°C for 2-4 hours, depending on its moisture content, which should not exceed 0.10%. During injection molding, the material should be melted at temperatures ranging from 210 to 260°C, with a mold temperature between 30 and 60°C.

Brand: WIC (54 products)

Polymer Name: Polypropylene Copolymer

Processing Methods: Injection Molding

Fillers Included: Carbon Fiber

Technical Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Chemical Family: Polyolefins,
Polypropylenes (PP)
Fillers Included: Carbon Fiber
Polymer Name: Polypropylene Copolymer
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Basic Thermoplastics
Polyolefins

Features & Benefits

Labeling Claims: PFOA-free,
PFOS-free,
Persistent Organic Pollutants (POP)-free
Materials Features: Heat Aging Resistant

Applications & Uses

Markets: Consumer Goods
Applications: Consumer Goods — Sports & Recreation
Plastics & Elastomers End Uses: Automotive Applications,
Sporting Goods
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Color

Mechanical Properties


	Value	Units	Test Method / Conditions
Flexural Modulus	17800.0	MPa	ISO 178
Flexural Strength	153.0	MPa	ISO 178
Tensile Modulus	15500.0	MPa	ISO 527
Tensile Strength	93.0	MPa	ISO 527
Tensile Elongation at Break	1.0	%	ISO 527
Impact Strength (Charpy, at 23°C)	36.0	kJ/m²	ISO 179/1eU
Notched Impact Strength (Charpy, at 23°C)	9.0	kJ/m²	ISO 179/1eA

Physical Properties


	Value	Units	Test Method / Conditions
Density	1130.0	kg/m³	ISO 1183
Global Warming Potential (GWP)	1.17	kg CO₂ eq.	ISO 14040, 14044

Thermal Properties


	Value	Units	Test Method / Conditions
HDT / A (1.8 MPa)	156.0	°C	ISO 75-1/-2
DSC (Melt Point)	160.0	°C	ISO 11357-1/-3

Typical Properties


	Value	Units	Test Method / Conditions
Moisture Content	max. 0.1	%	-

Electrical Properties


	Value	Units	Test Method / Conditions
Surface Resistance	max. 10	Ohm	IEC 62631-3-2
Specific Volume Resistance	0.1	Ohm*m	IEC 62631-3-1

Processing Information (Injection Molding)


	Value	Units	Test Method / Conditions
Melt Temperature	210 - 260	°C	-
Mould Temperature	30 - 60	°C	-

Rheological Properties


	Value	Units	Test Method / Conditions
Melt Index (MVR)	2.0	cm³/10min	ISO 1133
MVR Temperature	230.0	°C	-
MVR Load	5.0	kg	-
Molding Shrinkage (parallel)	0.1	%	ISO 294-4, 2577
Molding Shrinkage (normal)	0.1	%	ISO 294-4, 2577

Injection Moulding Processing Conditions

Under certain conditions the increased thermal conductivity must be considered.

Regulatory & Compliance

Certifications & Compliance: IATF 16949,
ISO 13485,
ISO 14001,
ISO 17025,
ISO 45001,
ISO 50001,
ISO 9001,
RoHS Compliant

Technical Details & Test Data

Pre-Drying Conditions

80°C in an air circulating dryer for 2-4h
Dependant on moisture content

Storage & Handling

Storage Conditions: Store in dry, protected from light.