Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Processing Information (Injection Molding)
- Rheological Properties
- Injection Moulding Processing Conditions
Under certain conditions the increased thermal conductivity must be considered.
| Value | Units | Test Method / Conditions | |
| Tensile Modulus | 9300.0 | MPa | ISO 527 |
| Tensile Strength | 60.0 | MPa | ISO 527 |
| Tensile Elongation at Break | 5.0 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | 70.0 | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Charpy, at 23°C) | 23.0 | kJ/m² | ISO 179/1eA |
| Value | Units | Test Method / Conditions | |
| Density | 1050.0 | kg/m³ | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| DSC (Melt Point) | 160.0 | °C | ISO 11357-1/-3 |
| Value | Units | Test Method / Conditions | |
| Moisture Content | max. 0.1 | % | - |
| Value | Units | Test Method / Conditions | |
| Melt Temperature | 210 - 260 | °C | - |
| Mould Temperature | 30 - 60 | °C | - |
| Value | Units | Test Method / Conditions | |
| Melt Index (MVR) | 5.0 | cm³/10min | ISO 1133 |
| MVR Temperature | 230.0 | °C | - |
| MVR Load | 5.0 | kg | - |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- 80°C in an air circulating dryer for 2-4h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light.