Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Key Attributes
- Creates strong permanent electrical connections
- Cures at room temperature
- Excellent adhesion to many substrates
- Room temperature storage
- Long shelf life
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Cure Method
- Recommended Preparation
- Clean the substrate with Isopropyl Alcohol, MG #824, so the surface is free of oils, dust, and other residues.
- Cure Instructions
The product will not cure at room temperature. Cure the adhesive in an oven at one of these time/temperature options:
- 15 min at 65 ˚C
- 7 min at 125 ˚C
- Syringe
- Twist and remove the cap from the syringe. Do not discard cap.
- Measure 1 part by volume of A.
- Measure 1 part by volume of B.
- Dispense material on a mixing surface or container, and thoroughly mix parts A and B together.
- To stop the flow, pull back on the plunger.
- Clean nozzle to prevent contamination and material buildup.
- Replace the cap on the syringe.
- Can or Jar
- Stir each part individually to re-incorporate material that may have separated.
- Measure 1.16 part by weight of A.
- Measure 1 part by weight of B.
- Thoroughly mix parts A and B together.
- Apply adhesive to the application area.
Properties
- Physical Form
- Thermal Properties
Value Units Test Method / Conditions Thermal Conductivity (at 25 ˚C) 1.4 W/(m·K) - - Typical Properties
Value Units Test Method / Conditions Mix Ratio 1:1 Volume - Mix Ratio 1.2:1 Weight - Service Cure 5 Hours - Viscosity (at 25 ˚C)ᴮ 15000 Pa·s - Viscosity (at 25 ˚C)ᴬ 1000 Pa·s - Working Time 10 Minutes - - Cured Properties
Value Units Test Method / Conditions Compressive Strength 39 N/mm2 - CTE After Tg 169 ppm/˚C - CTE Prior Tg 54 ppm/˚C - Glass Transition Temperature (Tg) 50 ˚C - Hardness Shore D 73 - - Lap Shear (Aluminum) 5.5 N/mm2 - Lap Shear (Stainless steel) 3.8 N/mm2 - Outgassing (at 125 ˚C for 24 h) 6.3 % - Resistivity 1.0 x 10⁻³ Ω·cm - Service Temperature Range -55 to 150 ˚C - Tensile Strength 13 N/mm2 - Water Absorption 0.04 % - - Uncured Properties
Value Units Test Method / Conditions Mixed Density 2.29 g/mL -
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Packaging & Availability
Storage & Handling
- Shelf Life
- 3 Years
- Storage and Handling
- Store between 16 and 27 ˚C in a dry area, away from sunlight (see SDS). To maximize shelf life, recap product firmly when not in use.