Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Key Attributes
- High thermal conductivity
- 1:1 mix ratio
- Provides strong electrical insulation
- High tensile strength
- Bonds well to a wide variety of substances
- Strong resistance to humidity, salt water, mild bases, and aliphatic hydrocarbons
Applications & Uses
- Markets
- Applications
- Application Area
- Cure Method
- Recommended Preparation
Clean the substrate with Isopropyl Alcohol, MG #824, so the surface is free of oils, dust, and other residues
Syringe
- Twist and remove the cap from the syringe. Do not discard cap.
- Measure 1 part by volume of A.
- Measure 1 part by volume of B.
- Dispense material on a mixing surface or container, and thoroughly mix parts A and B together.
- To stop the flow, pull back on the plunger.
- Clean nozzle to prevent contamination and material buildup.
- Replace the cap on the syringe.
Can or Jar
- Stir each part individually to re-incorporate material that may have separated during storage.
- Measure 0.95 part by weight of A.
- Measure 1 part by weight of B.
- Thoroughly mix parts A and B together.
- Apply adhesive to the application area.
Properties
- Physical Form
- Thermal Properties
Value Units Test Method / Conditions Thermal Conductivity (at 25 ˚C) 1.4 W/(m·K) - - Typical Properties
Value Units Test Method / Conditions Viscosity (at 25 ˚C)ᴬ 970 Pa·s - Viscosity (at 25 ˚C)ᴮ 2000 Pa·s - - Cured Properties
Value Units Test Method / Conditions Resistivity 2 x 10¹³ Ω·cm - Hardness Shore D 62 - - Tensile Strength 11 N/mm2 - Compressive Strength 43 N/mm2 - Lap Shear (Stainless steel) 4.7 N/mm2 - Lap Shear (Aluminum) 4.4 N/mm2 - Glass Transition Temperature (Tg) 8.8 ˚C - CTE Prior Tg 36 ppm/˚C - CTE After Tg 173 ppm/˚C - Service Temperature Range -40 to 150 ˚C - - Uncured Properties
Value Units Test Method / Conditions Mixed Density 2.27 g/mL -
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Technical Details & Test Data
- Cure Instructions
This product cures only at an elevated temperature, as per one of these time/temperature options:
Temperature 65 °C 80 °C 100 °C Time 1 hour 1 hour 20 minutes - Usage Parameters
Working Time 4 h Mix Ratio by Volume 1:1 Mix Ratio by Weight 0.95:1
Packaging & Availability
- Packaging Type
- Packaging and Supporting Products
Cat. No. Packaging Net Volume Net Weight 8329TCS-6ML 2 Syringe Kit 6 mL 13.8 g 8329TCS-50ML 2 Jar Kit 50 mL 116 g 8329TCS-200ML 2 Can Kit 200 mL 465 g
Storage & Handling
- Shelf Life
- 3 Years
- Storage and Handling
Store between 16 and 27 ˚C in a dry area, away from sunlight (see SDS). To maximize shelf life, recap product firmly when not in use.