MG Chemicals 8309 -P - Conformal Coating Remover Pen

• Strips acrylics, polyurethanes, and silicones
• Liquid format allows for full submersion of PCBs
• Safe on metals
• Contains no SVHC’s
• Fully biodegradable and environmentally safe

Liquid

1. Fully submerse PCB in the stripper.
2. Allow coating to soften.
3. Remove softened coating with a non-abrasive brush, then gently wipe with a clean cloth.
4. Rinse off remaining stripper with isopropyl alcohol (MG #824, MG #8241), or a PCB cleaner.

Pen

1. Shake pen vigorously.
2. Hold pen at an angle and carefully press tip against surface until tip is wet, but not flooding.
3. Gently brush on desired area, and control the flow by only pressing in tip as needed.
4. Replace cap and store tip up after use.