Hauthane HD-2001

Identification & Functionality

Carrier

Water

Chemical Family

Polyurethanes (PU)

CASE Ingredients Functions

Binder & Resin

Industrial Additives Functions

Fabric Softener

Technologies

CASE Ingredients,

Industrial Additives & Materials

Product Families

CASE Ingredients — Resins & Binders

Polyurethanes (PU)

Industrial Additives & Materials — Textile & Leather Chemicals

Finishing Additives & Treatments

Features & Benefits

CASE Ingredients Features

Abrasion Resistance,

Crack Resistance,

Excellent Adhesion,

Improved Flexibility,

Low Melting Point,

Low Temperature Flexibility,

UV Resistance

Industrial Additives Features

Abrasion Resistance,

Excellent Adhesion

Applications & Uses

Markets

Industrial

Applications

Industrial — Leather & Textiles

Textile Manufacturing

Application Method

Knife-over-roll

Compatible Polymers & Resins

Acrylics,

Vinyls

Compatible Substrates & Surfaces

Fibers & Fabrics,

Textiles

Industrial Additives End Use

Textiles

Product Applications

• HD-2001 may be used as a sole vehicle or blended with acrylic emulsions.
• Viscosity modification can be made with associative thickeners for application by spray, knife-over-roll, or other methods.

Product Uses

• HD-2001 was designed for use in textile applications that require a soft hand coupled with abrasion resistance, excellent adhesion and excellent resiliency. This versatile urethane is ideally suited for use as a finish for nylon and polyester threads and as a coating for nylon and vinyl substrates.
• HD-2001 is also suitable for textile-coating applications that require excellent low temperature flex crack resistance.
• The low melt temperature also allows HD2001 to be used as a heat-sealable coating. When properly formulated, HD2001 can be used as a coating for awning fabrics, boat cover fabrics, and other architectural fabrics.

Properties

Physical Form

Dispersion

Physical Properties

	Value	Units	Test Method / Conditions
Solids	40	%	-
Viscosity	50 - 500	cps	-
pH	7.5 - 10.0	-	-
Density	8.9	lbs/gal	-
Softening Point	265	°F	-
VOC Content (as supplied)	147	gm/l	-

Mechanical Properties (TPE)

	Value	Units	Test Method / Conditions
Elongation	550	%	Tested at 20 inches/minute
Tensile Strength	4000	psi	Tested at 20 inches/minute
100% Modulus	500	psi	Tested at 20 inches/minute
200% Modulus	900	psi	Tested at 20 inches/minute
300% Modulus	1500	psi	Tested at 20 inches/minute

Technical Details & Test Data

Curing

Typical oven drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties. Do not use crosslinking agents for heat-seal coating applications.