Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Carrier
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
Applications & Uses
- Markets
- Applications
- Application Method
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Product Uses
- L-3369 was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood.
- L-3369 produces glossy films with excellent leveling properties and good stain- and chemical-resistance to a variety of household food and cleaning products.
- Product Applications
- L-3369 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications.
- Rheology modifications can be made with associative thickeners for alternative application methods.
Properties
- Physical Form
- Physical Properties
Value Units Test Method / Conditions Solids 34 - 36 % - Viscosity 50 - 200 cps - pH 8.5 - 10.0 - - Density 8.7 lbs/gal - VOC Content (less water) 75 gm/l - VOC Content (as supplied) 26 gm/l - - Mechanical Properties (TPE)
Value Units Test Method / Conditions Elongation 300 % Tested at 2 inches/minute Tensile Strength 2700 psi Tested at 2 inches/minute 100% Modulus 2050 psi Tested at 2 inches/minute 200% Modulus 2350 psi Tested at 2 inches/minute
Technical Details & Test Data
- Curing
- L-3369 is a film former at 70°F and may be applied at lower temperatures with supplemental co-solvent addition of 3 - 5% hexylene glycol on total formulation weight.
- Typical oven drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties without additional co-solvent.
- The performance of L-3369-based coatings may be enhanced with carbodiimide and aziridine crosslinkers.
- Drying
- L-3369 is a film former at 70°F and may be applied at lower temperatures with supplemental co-solvent addition of 3 - 5% hexylene glycol on total formulation weight.
- Typical oven drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties without additional co-solvent.
- The performance of L-3369-based coatings may be enhanced with carbodiimide and aziridine crosslinkers.