TEGO® Antifoam 204

• Excellent long-term efficiency, combined with maximum compatibility with most polymer dispersions.
• No silicone related side effects, e. g. fish eyes, surface defects, de-wetting etc.
• This results in a unique product profile which cannot be achieved either with organic or with traditional silicone oil based antifoams

TEGO® Antifoam 204 provides reliable foam control in aqueous media and may therefore be used for foam control in a variety of industrial applications:

• in the processing and application of polymer dispersions/latices.
• in a multitude of other industrial applications where the use of traditional silicone oil based antifoams is restricted for certain reasons.

• A pre-dilution of TEGO® Antifoam 204 can be beneficial depending on the application in question.
• The ration should be between 1 : 1 to 1 : 10.
• Depending on the application the required dosage may vary over a wide range (0.05 to 0.5 %); suitable screening tests are therefore recommended (initial dosage: 0.1 %).
• Dilution of TEGO® Antifoam 204 may be prepared by adding the desired amount of water to TEGO® Antifoam 204 while stirring gently at low shear rates.
• 1 : 1 dilutions prepared as described above are stable for several days; 1 : 10 dilutions should be processed within several hours.

• 200 kg plastic drums (800 kg each pallet)
• 1000 kg containers

• 200 kg PE drums (800 kg each drum)
• 1000 kg containers

It is stable in closed containers for a minimum of 6 months. It must be stored in frostfree conditions.

It is stable in closed containers for a minimum of 6 months. It must be stored in frostfree conditions.