Thixcin® R PC

• Adds thixotropic body and controls viscosity
• Reduces settling of pigments and extenders
• Produces optimum flow
• Enhances leveling
• Improves stick pay-off
• Provides binding in pressed powders
• Improves compatibility

Thixcin® R PC should be added to the emulsion's oil phase or, in non-emulsion-based formulations, at the beginning of the dispersion process, preferably by pre-mixing the solvent or oil for 5 minutes before other components are added.

Thixcin® R PC should be subjected to as much shear as possible during processing to develop its full properties. However, when using Thixcin® R PC, an incorporation temperature range of 55-65°C must be observed; below 55°C, thixotropy will not develop; above 65°C, soft gel-like particles may appear on cooling the formulation. The presence of higherpolarity oils and solvents will lower this upper temperature limit. To avoid the particles forming, continuous stirring should be maintained until the product has cooled to below 45°C.

Incorporation of Thixcin® R PC into dry systems is by normal powder blending techniques.

• Typical addition levels are 0.2 to 0.8 % Thixcin® R PC by weight of the system (or oil phase in emulsions), depending upon the rheological properties required.
• In pressed powders, tablets and granules 0.5 to 2.0 % should provide adequate binding.

Quality and continuous improvement are paramount to our business. Facility manufacturing Thixcin® R PC has established strong integrated management system and holds ISO 9001, ISO 14001, and ISO 45001 certifications.