Products

DayGlo offer both fluorescent and non fluorescent dyes for plastics. DayGlo's dyes are cost effective alternatives to using pigments when applied in polystyrene and many other engineering resins.

PET Plasticizer Dispersions product line is a series of conventional pigments dispersed in DINP. They have been specifically formulated for use in flexible vinyl applications and caulk applications. They exhibit excellent color strength and color characteristics.

StarFire® II Litho Inks are formulated fromDayGlo StarFire® II Litho Base colors. They are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability. Developed to meet the needs of the printer and the color specifier.

SPL and WFD dispersions are based on a unique formaldehyde-free pigment technology. These products offer a bright, sub-micron, high strength, fluorescent pigment particle with good lightfastness properties. The SPL and WFD dispersions are suspended in water and suitable for use in water-based inks and coatings.

Elara™ the second generation of regulatory approved fluorescent colorants for cosmetics! Lightfastness has been improved an average of 2.5 times over the first generation of fluorescent colorants. Elara™ colorants can be used in oil-based and solvent or water born formulations. These colorants employ a revolutionary new thermoset polymer that is resistant to the solvents commonly employed in nail enamels and hair sprays. This makeup colorant performs well in all types of personal care products, including lip gloss and lip sticks, lotions and soaps, face paint, temporary hair color, and nail lacquer to name a few.

Gem-Tone GC19XPF Sapphire Blue is a transparent colorant (prill form) intended for use in clarified polypropylene. Clean, haze free, non-halogenated, non-warping color formulations can easily be achieved with the use of this colorant. No blooming or plateout problems will be exhibited with Gem-Tone colorants. GC19XPF Sapphire Blue is FDA approved for use in PP and has recommended use @ 1% LDR (NTE 9%).

T and GT-series pigments are thermoset, fluorescent pigments recommended for a wide range of applications where solvent resistance is required.

T and GT-series pigments are thermoset, fluorescent pigments recommended for a wide range of applications where solvent resistance is required.

AIT Colorants are high tint strength color dispersions of quality conventional pigments in water and glycol used primarily for aqueous in plant tinting. AIT dispersions are available in many standard colors and are also produced as custom color matches.

NVC colorants are high tint strength, zero VOC water-based conventional color dispersions. These glycol free aqueous dispersions utilize dispersant and surfactant blends offering a wide range of compatibility for water-based systems. The minimum 6. 0 on the Hegman Gage make these dispersions suitable for tinting semi-gloss and gloss latex enamels.

Screamin' SRX Fluorescent Paint is a premium, low odor, water-based fluorescent latex paint. Maximum lightfastness and film integrity are dependent upon the use of DayGlo FILTERAY® Type "W" (clear overcoat). DayGlo® Screamin' SRX paints appear to glow in the dark when exposed to black light.

StarFire® II Litho Inks are formulated fromDayGlo StarFire® II Litho Base colors. They are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability. Developed to meet the needs of the printer and the color specifier.

Screamin' SRX Fluorescent Paint is a premium, low odor, water-based fluorescent latex paint. Maximum lightfastness and film integrity are dependent upon the use of DayGlo FILTERAY® Type "W" (clear overcoat). DayGlo® Screamin' SRX paints appear to glow in the dark when exposed to black light.

SPL and WFD dispersions are based on a unique formaldehyde-free pigment technology. These products offer a bright, sub-micron, high strength, fluorescent pigment particle with good lightfastness properties. The SPL and WFD dispersions are suspended in water and suitable for use in water-based inks and coatings.

StarFire® II Litho Inks are formulated fromDayGlo StarFire® II Litho Base colors. They are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability. Developed to meet the needs of the printer and the color specifier.

ECO pigments are the first formaldehyde-free pigments to attain the color brilliance and stability offered by traditional formaldehyde containing products with the added benefit of being produced using recycled materials. ECO pigments are recommended for a wide range of applications where resistance to strong solvents is not required. ECO pigments can be used in paper coating, textile printing, aliphatic solvent-based gravure inks, craft and hobby paints and vinyl plastisol inks.

Hi-Tint dispersions are recommended for in-plant tinting of solvent-based industrial, aerosol and trade sales coatings. These high strength conventional pigment dispersions incorporate high quality pigments in a unique alkyd vehicle system. Each colorant has been formulated for maximum pigment color value while maintaining a wide range of compatibility and characteristics such as non-settling, pourability, flocculation resistance and shelf stability.

HM and HMS solvent soluble toners are high strength, transparent fluorescent colorants designed for flexo and gravure applications on flexible packaging, films and foils. HM soluble toners are standard strength, whereas the HMS toners offer higher strength to give the ink maker increased latitude in their formulations.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

Hi-Tint dispersions are recommended for in-plant tinting of solvent-based industrial, aerosol and trade sales coatings. These high strength conventional pigment dispersions incorporate high quality pigments in a unique alkyd vehicle system. Each colorant has been formulated for maximum pigment color value while maintaining a wide range of compatibility and characteristics such as non-settling, pourability, flocculation resistance and shelf stability.

DayGlo® 215 Fluorescent Alkyd Enamel Paint is a premium oil based fluorescent paint. Maximum lightfastness and film integrity are dependent upon the use of DayGlo FILTERAY® Type D (clear overcoat). DayGlo® 215 Alkyd Enamel paints appear to glow in the dark when exposed to black light.

Hi-Tint dispersions are recommended for in-plant tinting of solvent-based industrial, aerosol and trade sales coatings. These high strength conventional pigment dispersions incorporate high quality pigments in a unique alkyd vehicle system. Each colorant has been formulated for maximum pigment color value while maintaining a wide range of compatibility and characteristics such as non-settling, pourability, flocculation resistance and shelf stability.

WAX and WT Fluorescent Water Dispersions are used in a variety of applications, including latex paints, tempera paints, water colors, paper coatings and other aqueous systems. WAX/WT Dispersions exhibit good lightfastness for interior applications.

PET Plasticizer Dispersions product line is a series of conventional pigments dispersed in DINP. They have been specifically formulated for use in flexible vinyl applications and caulk applications. They exhibit excellent color strength and color characteristics.

A and AX series pigments are thermoplastic, fluorescent pigments recommended for a wide range of applications where resistance to strong solvents is not needed, including paper coatings, vinyl coated fabric, A-type gravure inks, paints, screen inks, and vinyl plastisols and organisols.

Screamin' SRX Fluorescent Paint is a premium, low odor, water-based fluorescent latex paint. Maximum lightfastness and film integrity are dependent upon the use of DayGlo FILTERAY® Type "W" (clear overcoat). DayGlo® Screamin' SRX paints appear to glow in the dark when exposed to black light.

WAX and WT Fluorescent Water Dispersions are used in a variety of applications, including latex paints, tempera paints, water colors, paper coatings and other aqueous systems. WAX/WT Dispersions exhibit good lightfastness for interior applications.

Phantom DINV invisible pigments are organic UV reactive organic pigments that are invisible in most applications until excited with a UV light (long wave 365nm or short wave 254nm). The 5 micron particle size allows for flexible formulation in water and solvent systems. The strong UV response and low loading requirements (under. 5%) make DINV pigments an excellent choice for security printing, coating and novelty applications.

ECO pigments are the first formaldehyde-free pigments to attain the color brilliance and stability offered by traditional formaldehyde containing products with the added benefit of being produced using recycled materials. ECO pigments are recommended for a wide range of applications where resistance to strong solvents is not required. ECO pigments can be used in paper coating, textile printing, aliphatic solvent-based gravure inks, craft and hobby paints and vinyl plastisol inks.

GloPrill® is the highest-performing fluorescent colorant developed for use in polyolefins with the masterbatch/color concentrate producer in mind. GloPrill® will eliminate your plateout problems. Formulators will be able to easily double their loading levels and cut your through-put time in half. GloPrill® is formaldehyde and dust free. Use as a replacement for melt-in colorants for custom color matches.

The DayGlo SPL-N Dispersions contain approximately 46% fluorescent pigment dispersed in water and a small percentage of alkali soluble acrylic resin. The SPL-N Dispersions are V.O.C. (Volatile Organic Compounds) free. They are compatible with a wide range of aqueous systems.

HM and HMS solvent soluble toners are high strength, transparent fluorescent colorants designed for flexo and gravure applications on flexible packaging, films and foils. HM soluble toners are standard strength, whereas the HMS toners offer higher strength to give the ink maker increased latitude in their formulations.

WAX and WT Fluorescent Water Dispersions are used in a variety of applications, including latex paints, tempera paints, water colors, paper coatings and other aqueous systems. WAX/WT Dispersions exhibit good lightfastness for interior applications.

NVC colorants are high tint strength, zero VOC water-based conventional color dispersions. These glycol free aqueous dispersions utilize dispersant and surfactant blends offering a wide range of compatibility for water-based systems. The minimum 6. 0 on the Hegman Gage make these dispersions suitable for tinting semi-gloss and gloss latex enamels.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.