Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Industrial Additives Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Industrial Additives Features
- Product Highlights
- Our silicone based releases are more efficient and significantly outperform the conventional oil based releases. Lower usage is achieved, typically one third of oil based releases. Significant handfeel improvement can be obtained in the finished tissue product. Less foam is produced in the white water system as compared to competitive products. Based on the lower concentrations used, waste water solids are reduced up to one sixth of the typical waste generated when oil based release agents are used.
- Advantages
- CP Release 830 is a silicone based release, it is more efficient and significantly outperforms conventional oil based releases; much lower addition is needed, typically one third of the oil based releases.
- Significant hand-feel improvement can be obtained in the finished tissue product.
- The release effect depends on the Yankee coating/release package that is used.
- ChemPro recommends using the CP Coat 750 adhesive with this product.
- Less foam is produced in the white water system as compared to competitive products.
- Based on the much lower addition the waste water solids are reduced up to one sixth of the typical waste generated when oil based release is used.
Applications & Uses
- Markets
- Applications
- Industrial Additives End Use
- Applications
CP Release 830 is used as a release agent on the tissue paper Yankee Dryer.
A diluted solution of CP Release 830 is mixed with CP Coat 750 and sprayed onto Yankee dryer.
CP Release 830 will increase the hand-feel of the tissue paper. The increase of surface smoothness and the increase of flexibility of the tissue sheet will depend on the amount of CP Release 830 applied, on the furnish used for the tissue paper and on the physical characteristics of the tissue paper.
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Active Content 28 - 32 % - Viscosity max. 50 mPa.s - Density (at 20°C) 1 g/cm³ pH 5 - 7 - -
Regulatory & Compliance
- Certifications & Compliance
- Regulatory Status
- CP Release 830 is a silicone product that is largely inert.
- CP Release 830 conforms to the State of California Proposition 65 legislation.
- Components of CP Release 830 are not listed in hypoallergenic products formula review prohibited list.
Packaging & Availability
- Packaging Type
- Commercial Information
- CP Release 830 is delivered in plastic 200 liters drums or on request in tote tanks.
Storage & Handling
- Shelf Life
- 12 Months
- Storage Details
- CP Release 830 should be stored in closed containers such as tote tanks or drums, at temperature between +5°C and +35°C. Shelf life is 12 months.