ALD Technical Solutions

CompositeWrap™ UDC20 Carbon Fabric is a medium weight, high tensile strength unidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ UDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

StrongBond™ 200 Adhesive Putty System is a high-strength, toughened, structural epoxy adhesive for the bonding of carbon fabrics to itself and many dissimilar materials. It is a two-phase (toughened) epoxy resin produced using a CTBN elastomer with a flexible epoxy resin backbone for maximum stress and fatigue resistance. StrongBond™ 200 Adhesive Putty System with an immediate high tack consistency, a long working life, and a quick cure time. StrongBond™ 200 Adhesive Putty System may be used at ambient temperature(s) ranging from 55°F(13°C) to 100°F (38°C). The working life at 100°F (38°C) is > 2 hours (working time increases with lower ambient temperatures), with full cures occurring between 6-12 hours depending on cure temperature. Unlike most epoxy adhesives, StrongBond™ 200 Adhesive Putty System cured at ambient temperatures provides heat resistance well more than most engineering limits with an HDT of 85°C (185 °F). The material mixes at 2:1 by volume or 100:44 by weight (resin to hardener). The convenient color-coded components form a uniform color when properly mixed. StrongBond™ 200 Adhesive Putty System is designed for high production meter/mix ram dispensing and although highly thixotropic, has very fast application rates. With low odor and toxicity, StrongBond™ 200 Adhesive Putty System is solvent-free, and 100% solids.

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

CompositeWrap™ BDC20 Carbon Fabric is a medium weight, high tensile strength bidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ BDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications