Products in Paints & Coatings: Polyamides

Duralon™ - DS211N32 is two-coat thermoplastic coating solution primarily nylon-based. Duralon™ is formulated with nylon for a higher durometer and temperature resistance. It adheres with an initial primer coat.

Protal 650 CTR™ (Coal Tar Replacement) is a two-part product formulated to replace coal tar epoxy. It is based on polyamide chemistry designed as an environmentally friendly alternative to hazardous coal tar epoxies for long-term corrosion protection of steel and concrete substrates against water and seawater corrosion.

Pacific Resins & Coatings MIL-PRF-23377 TY I, Cl N primer is a two-component, corrosion inhibiting, polyamide primer. This epoxy primer offers excellent corrosion and chemical resistance over properly prepared aluminum and steel substrates. This primer meets Type I (std pigments), Class N (Non- Chromate), and was designed to be top-coated with urethane or epoxy topcoats.

Duralon™ - DS211M42 is two-coat thermoplastic coating solution primarily nylon-based. Duralon™ is formulated with nylon for a higher durometer and temperature resistance. It adheres with an initial primer coat.

Duralon™ - DS211G95 is two-coat thermoplastic coating solution primarily nylon-based. Duralon™ is formulated with nylon for a higher durometer and temperature resistance. It adheres with an initial primer coat.

Wilko Paint Wilkopon Rust Inhibitive Primer Wilko No. 347.62 is a two-component rust inhibitive epoxy polyamide coating that is designed for direct application to metals following the removal of loose rust and scale.

MS-100 High Performance Coating is a Polyamide resin coating especially developed to withstand harsh corrosive and abrasive conditions (which quickly destroys conventional protective paint coatings). MS-100 is designed to adhere to almost any clean surface; wood, plastic, brick, and metals e.g. galvanized steel, aluminum, hot or cold rolled steel. Surface should be free of rust, mill scale, paint, grease, oil, or any other film forming foreign material. Can be applied by spray, brush, roller, or dipping.

Pacific Resins & Coatings MIL-PRF-23377 TY II, Cl N is a two-component, corrosion inhibiting, polyamide primer. This epoxy primer offers excellent corrosion and chemical resistance over properly prepared aluminum and steel substrates. This primer meets Type II (Low Infrared), Class N (Non-Chromate), and was designed to be top-coated with urethane or epoxy topcoats.

Duralon™ - DS211V18 is two-coat thermoplastic coating solution primarily nylon-based. Duralon™ is formulated with nylon for a higher durometer and temperature resistance. It adheres with an initial primer coat.

Protal 600 CTE Low VOC™ is a two-part high build coal tar epoxy that has low VOC's. It can be applied as a single or two-coat system. It is a polyamide with excellent abrasion and chemical resistance.

Pacific Resins & Coatings MIL-PRF-23377 TY II, Cl C2 is a two-component, corrosion inhibiting, polyamide primer. This epoxy primer offers excellent corrosion and chemical resistance over properly prepared aluminum and steel substrates. This primer meets Type II, (Low Infrared), Class C2- Strontium Chromate-based corrosion inhibitors, and was designed to be top coated.

Wilko Paint Wilkopon Primer Gray Wilko No. 342.22 is a two-component epoxy polyamide primer that has good early recoat properties. It has excellent sanding and filling properties, which makes it ideal for refinishing surfaces that have been previously coated with epoxies and urethanes. It has excellent adhesion to a wide variety of substrates including concrete, treated galvanized & stainless steel, etched aluminum, and fiberglass-filled polyester plastics.

Drew Paints 54 Series Epoxy Polyamide Primer is a high performance epoxy primer that is designed to be applied to blasted steel substrates. Drew 54 Series has good chemical resistance for splash/spill exposure.

Duralon™ - DS211R44 is two-coat thermoplastic coating solution primarily nylon-based. Duralon™ is formulated with nylon for a higher durometer and temperature resistance. It adheres with an initial primer coat.

Duralon™ - DS211W26 is two-coat thermoplastic coating solution primarily nylon-based. Duralon™ is formulated with nylon for a higher durometer and temperature resistance. It adheres with an initial primer coat.

Duralon™ - DS211B47 is two-coat thermoplastic coating solution primarily nylon-based. Duralon™ is formulated with nylon for a higher durometer and temperature resistance. It adheres with an initial primer coat.

Wilko Paint Wilkopon Primer Red Oxide Wilko No. 347.49 is a two-component epoxy polyamide primer that has good early recoat properties. It has excellent sanding and filling properties, which makes it ideal for refinishing surfaces that have been previously coated with epoxies and urethanes. It has excellent adhesion to a wide variety of substrates including concrete, treated galvanized & stainless steel, etched aluminum, and fiberglass-filled polyester plastics.

Pacific Resins & Coatings MIL-PRF-23377 TY I, Cl C2 primer is a two-component, corrosion inhibiting, polyamide primer. MIL-PRF-23377K offers excellent corrosion and chemical resistance over properly prepared aluminum and steel substrates. This primer meets Type 1 (standard pigments), Class C2 (strontium chromate), and was designed to be top-coated with urethane or epoxy topcoats.

Duralon™ - DS211H30 is two-coat thermoplastic coating solution primarily nylon-based. Duralon™ is formulated with nylon for a higher durometer and temperature resistance. It adheres with an initial primer coat.

Elastiment® 957 is a two component epoxy-polyamide penetrating primer/sealer. Elastiment® 957 is used to seal concrete or plywood substrates and to improve adhesion.

Wilko Paint Wilkopon Hs Recoatable Primer Gray Wilko No. 342.46 is a two-component epoxy, high build, epoxy-polyamide coating designed for fast dry and early or extended recoatability. It meets the Arizona Administrative Code Section R18-2-727. It also meets the Maricopa County Emission limits of 3.5#/gal for air-dried coating for metal parts and products. It is an epoxy-polyamide type.

Duralon™ - DS211Q28 is two-coat thermoplastic coating solution primarily nylon-based. Duralon™ is formulated with nylon for a higher durometer and temperature resistance. It adheres with an initial primer coat.

Wilko Paint Wilkopon Hs Recoatable Primer Red Wilko No. 347.67 is a two-component epoxy, high build, epoxy-polyamide coating designed for fast dry and early or extended recoatability. It meets the Arizona Administrative Code Section R18-2-727. It also meets the Maricopa County Emission limits for air-dried coating for metal parts and products.

Protal 600 CTE™ is a two-part high build coal tar epoxy, that can applied as a single or two-coat system. It is a polyamide with excellent abrasion and chemical resistance.

Duralon™ - DS211H28 is two-coat thermoplastic coating solution primarily nylon-based. Duralon™ is formulated with nylon for a higher durometer and temperature resistance. It adheres with an initial primer coat.