Products in Paints & Coatings: Aliphatics

Hauthane L-4143 is a halogen-free, flame-retardant aliphatic polyurethane dispersion that stands out for being co-solvent free. This soft and versatile formulation finds application in various industries due to its flame-retardant properties. Hauthane L-4143 is designed to provide effective flame retardancy without the use of halogenated compounds, making it a suitable choice for applications where such characteristics are essential.

Hauthane HD-3810 is an aliphatic, polyurethane topcoat which produces a soft, rubbery feel at low gloss levels. Features: Soft, rubbery/grabby feel. Inherently low gloss without the use of external flatteners. Silicone-free. Can be crosslinked to enhance performance. Forms a film at room temperature. Low VOC: 50 g/l less water.

Hauthane HD-3820 is a formulated, aliphatic, polyurethane topcoat which produces a soft, silky feel at low gloss levels. Features: Soft, silky feel. Low gloss. Can be crosslinked to enhance performance. Forms a film at room temperature. Low VOC: 50 g/l less water.

Hauthane HD-3830 is a formulated, aliphatic, polyurethane topcoat which produces a soft, slick feel at low gloss levels. Features: Soft, slick feel Low gloss Can be crosslinked to enhance performance Forms a film at room temperature Low VOC: 50 g/l less water

Classic Matte Sealer is an acrylic, single component sealer that is designed to be used over all of our stains and on polymer-modified cement toppings, waterborne colorants, concrete, brick, masonry, pavers, Spanish tile, stucco, and natural stone. Be sure to properly prepare surfaces before applying.

COLORCOAT AL-ESTER is a single component, liquid applied, moisturecured, aliphatic polyester-polyurethane surface protection coating. COLORCOAT AL-ESTER is a wear surface and waterproofing topcoat used in the TUFFLEX Systems. When COLORCOAT AL-ESTER is incorporated into these systems, it helps to protect concrete and plywood decks, parking structures, mechanical equipment pads and areas that require a seamless membrane system for protection against water damage. It can also be used on substrates in industrial locations, heavy vehicular and pedestrian traffic areas, and on many other properly prepared substrates. COLORCOAT AL-ESTER can also be used as a topcoat for polyurethane athletic track surfaces that need protection from oils, greases, mild chemical spillage and ultraviolet light. Do not use in areas of water immersion such as water parks and ponds.

CHEM-THANE DCP RR is a fast curing, two component aliphatic polyaspartic polyurea topcoat. It has superior color and gloss retention and meets or exceeds SSPC Paint Specifications 36, 38 and 39 Level 3 weathering performance requirements.

The URS 7600 series is an aliphatic, two-component, non-yellowing urethane coating system that can be applied directly to surfaces as a sealer / surfacer in single or multiple coat applications. URS 7600 is recommended for applications requiring extreme ultraviolet, outdoor weather, chemical, and water resistance.

Classic satin armor 2k aliphatic-polyurethane sealer is a clear, 2-part component, voc < 19/1 63% solids, waterborne, special blend sealer that is designed to be used over all of our stains, as well as polymer modified cementitious toppings, masonry, concrete and waterborne colorants. May be used for exterior & interior. Satin armor 2k provides uv stability and will not yellow.

Protective Industrial Polymers PIP 2200 UR is the 100g/L VOC version of PIP 2100 UR. It is specifically formulated for use in geographical areas where maximum VOC restrictions are set at 100g/L for industrial maintenance coatings. PIP 2200 UR is a high-solids, high-gloss, two or three-part, aliphatic clear or pigmented polyurethane coating. It can be applied over an epoxy primer or used to recoat an existing epoxy or urethane floor.

Classic Satin Armor 2K Aliphatic-Polyurethane Sealer is a clear, 2-part component, voc< 19/1 63% solids, waterborne, special blend sealer that is designed to be used over all of our stains, as well as polymer modified cementitious toppings, masonry, concrete and waterborne colorants. May be used for exterior & interior. Satin Armor 2k provides UV stability and will not yellow.

Anchor Bond® Anchor Thane® Topcoat (Pigmented) is a two component Aliphatic Poly aspartic coating. It is a UV light stable, high performance polymeric system that exhibits superior chemical resistance to oil, grease, strong detergents and a variety of solvents. Its ability to cure quickly enables flooring projects to be completed in shorter periods of time, therefore creating less down time for production.

Protective Industrial Polymers PIP 2100 UR-Gloss is a high-solids, two part, aliphatic clear polyurethane coating. PIP 2100 UR-Gloss is formulated to greatly reduce damaging UV rays from penetrating and yellowing an epoxy basecoat. PIP 2100 UR-Gloss is recommended as the clear finishing coat on decorative flake, quartz or metallic pigmented flooring systems. Added abrasion resistance may be obtained with the optional DiamondWear additive or GlossGrip #10 additive. Addition of the DiamondWear Additive will result in a satin finish whereas the addition of GlossGrip #10 will maintain gloss and exhibit slight skid resistance and easily cleaned finish.

ELASTA-TUFF 6000-AL is a single component, liquid applied, moisturecuring, aliphatic polyurethane industrial maintenance coating. It is used as the Top Coat for most of the polyurethane deck coating systems supplied by TUFFLEX Polymers (TUFFLEX). ELASTA-TUFF 6000-AL is used in those areas where a low VOC, mild to medium solvent containing coating is required by regional EPA regulations.

Classic Polyurethane/Acrylic Wet-Look Sealer is a clear, single component, low VOC, high solids, waterborne, special blend sealer that is designed to be used over all of our stains, polymer-modified cementitious toppings, concrete, waterborne colorants, masonry, and sealers. It may be used for exterior and interior applications in a wide range of climates. Classic Polyurethane Acrylic Sealer acts as a UV stabilizer and will not yellow.

Ever-Thane® Bright White is a low VOC, multi purpose, aliphatic, single component, moisture cured, liquid-applied urethane coating designed for use as a top coat or for repair work on a variety of roof systems, including single-ply, metal, built-up, modified bitumen, spray polyurethane foam, and concrete.

Protective Industrial Polymers PIP 2100 UR-Satin is a high-solids, smooth, satin, three-part, aliphatic polyurethane coating. It can be applied over an epoxy primer or used to recoat an existing epoxy or urethane floor. It may be applied as a clear coat rendering UV protection of underlying epoxy basecoats.

Anchor Bond® Anchor Thane® Topcoat (Clear) is a two component aliphatic poly aspartic coating. It is a UV light stable, high performance polymeric system that exhibits superior chemical resistance to oil, grease, strong detergents and a variety of solvents. Its ability to cure quickly enables flooring projects to be completed in shorter periods of time, therefore creating less down time for production.

PRECIDIUM™ LS-1150D is a 0 VOC, aliphatic coating designed as an abrasion resistant top coat for polyurea and polyurethane systems or as a stand-alone product over properly prepared substrates. It is available in five standard colors (can be custom colored) and in optional non-skid finishes for a wide range of flooring and decking applications.

URS 1560 is a clear, one-component, non-yellowing urethane coating that can be applied directly to surfaces as a sealer / surfacer in single or multiple coat applications. URS 1560 is recommended for applications requiring high abrasion and chemical resistance, such as floor and deck coating, masonry sealer, and so on.

Ever-Thane® Color Coat 100 is an economical, aliphatic, single component, liquid applied, moisture cured, polyurethane topcoat. Select the correct product grade complying with VOC regulations as per federal, state, county, and city regulations/codes at the place of installation of product.

Ever-Thane® Bright White Plus is a versatile, multi-purpose, aliphatic, single component, fire retardant, moisture cured, liquid-applied urethane coating designed for use as a top coat or for repair work on a variety of mature roof systems, including: spray polyurethane foam, single-ply, metal, built up roofs, modified bitumen, and concrete roofs.

Classic Satin Armor 2K Aliphatic-Polyurethane Sealer is a clear, 2-part component, voc< 19/1 63% solids, waterborne, special blend sealer that is designed to be used over all of our stains, as well as polymer modified cementitious toppings, masonry, concrete and waterborne colorants. May be used for exterior & interior. Satin Armor 2k provides UV stability and will not yellow.