Products in Fluids & Lubricants: Concrete

Monroe Fluid Technology Concrete Oil Release is a ready-to-use concrete form release agent specifically designed to be used with wooden concrete forms. The unique blend of mineral oils and fatty acid additives prevents concrete from bonding to the forms, ensuring clean, consistent form release and removal. Wooden form life is extended due to the preservative action of this product. This product is intended to be used as received, with no mixing or dilution needed.

BIO-FOMO 1 is a form oil with low viscosity especially suitable for steel casting forms or other non-porous form materials. The product has been developed for the future to meet the demands on environmental friendliness and independence of fossil resources Biobase Sweden AB BIO-FOMO is one of the few products in the market that does not contain any fossil hydrocarbons. The active formulation gives a thin layer of soap in the contact between wet concrete and the form which prevents sticking.

Bio-Lub Canada BLC-530 (Biodegradable form oil, 3 season formula) is a biodegradable, efficient and safe formwork oil, formulated for the concrete application industry. When this oil is applied in a thin and uniform layer, it provides a physical and chemical separation effect at the contact surface between the concrete and the formwork, which facilitates the release of the forms.

Verila® LiCa EP 2 VG220 VT is high performance lubricating grease intended for the lubrication in heavy duty applications. It is based on mixed lithium-calcium soap thickener system and mineral base oil of ISO VG220 viscosity grade. The grease contains antioxidants, corrosion inhibitors, extreme pressure [EP] and Anti-wear [AW] additives as well as tackiness agent providing that grease stay in place longer.

HD Chemicals Instant_De_icer is a eco-friendly de-icer granules. Instant melt works faster at melting snow, ice and frost than rock salt., It is a compacted granule consisting of magnesium chloride, sodium chloride and corrosion inhibitors.

Biobase Sweden AB BIO-FOMO 2 is a form oil with a viscosity that works for most concrete casting work. The product has been developed for the future to meet the demands on environmental friendliness and independence of fossil resources. The product is odorless and gives an excellent surface finish without discolorations. Works on steel, plastic, plywood, and wood casting form for both vertical and horizontal surfaces. BIO-FOMO range of concrete form oils are one of the few products in the market that does not contain any fossil hydrocarbons. The active formulation gives a thin layer of soap in the contact between wet concrete and the form which prevents sticking.

Aztec Oils Limited MOULD RELEASE CC 120 is a hydrocarbon based release fluid formulated principally for the production of molded concrete products. Suitable for use on metal and timber form work, where it will preserve the timber and prevent corrosion on the metal. Produces a clean and positive release combined with a stain free finish.

Verila® Li Complex EP 2 PTFE Green is Extremely High Performing Heavy-Duty grease, suitable for premium lubrication of a very wide range of applications, within a wide temperature range, -25 to 160 Celsius. It contains a blend of the finest additives and also PTFE, providing excellent protection of the lubricated parts against wear. The product is providing wonderful oxidation stability, rust and corrosion prevention, extremely high anti-wear effect, excellent water washout resistance and extreme performance even in the most extreme and or shock loads, helping extend bearing life, which means less downtime.

Multi–Slick™ Pipe Joint Lubricant for concrete and PVC eliminates the problems with existing pipe joint lubricants. It is an odor-free, easy-to-apply, soft paste material. Multi–Slick™ Pipe Joint Lubricant sticks to both wet and dry surfaces on concrete and plastic pipes. It doesn’t wash off, even with flowing water. Multi–Slick Pipe Gasket Lube is designed for lubricating slip-on or “O” Ring type joints without harming rubber or plastic gaskets.

Aztec Oils Limited MOULD OIL 220 is a mold release oil formulated especially for use in the production of molded concrete products. Suitable for use on metal and timber frame work, where it will preserve the timber and prevent corrosion of the metal. Producing a clean and easy release from the mold.

Biobase Sweden AB BIO-FOMO 3 is a form oil with a higher viscosity and very low volatility. The product has been developed for the future to meet the demands on environmental friendliness and independence of fossil resources. The biobased product degrades very quickly in the environment. With BIO-FOMO 3 you get a product with excellent release properties especially from vertical surfaces and porous casting form materials like wood and plywood. Also works on steel and plastic casting form for both vertical and horizontal surfaces. BIO-FOMO range of concrete form oils are one of the few products in the market that does not contain any fossil hydrocarbons. The active formulation gives a thin layer of soap in the contact between wet concrete and the form which prevents sticking.

MIX2FIX Machinable Ceramic is dry-film lubricant product reinforced with superfine ceramic that cures at ambient temperatures to produce a self-lubricating, impact- and wear-resistant finish that will not rust.

Bio-Lub Canada BLC-540 (Biodegradable form oil, winter formula) is a biodegradable, efficient and safe formwork oil, formulated for the concrete application industry. When this oil is applied in a thin and uniform layer, it provides a physical and chemical separation effect at the contact surface between the concrete and the formwork, which facilitates the release of the forms.

Aztec Oils Limited MOULD OIL 50 is a mineral based mold release oil suitable for use on metal and timber frame work. Forming a release layer between the setting concrete and mold, its low viscosity allows for an excellent product finish utilizing both metal and timber frame work. The fluid is designed to preserve the timber and prevent corrosion of the metal.

Aztec Oils Limited MOULD OIL 150 is a mineral based mold release oil suitable for use on metal and timber frame work. Forming a release layer between the setting concrete and mold, its viscosity allows for an excellent product finish utilizing both metal and timber frame work. The fluid is designed to preserve the timber and prevent corrosion of the metal.

Verila® Li Complex EP 3 VG320 PTFE is extra Heavy-Duty grease developed for the extreme automotive and Industrial applications. It is based on lithium complex thickener and blend of synthetic and high-quality mineral base oils of ISO VG320 viscosity grade. The grease contains the additives which provide extraordinary extreme pressure performance, rust and corrosion protection and resistance against oxidation, leading to extended bearing life. In addition, this grease contains PTFE dry lubricant which provides superior anti-wear protection and withstanding of extremely high and shock loadings.

Aztec Oils Limited MOULD RELEASE CC 24 is a hydrocarbon based release fluid formulated principally for the production of molded concrete products. Suitable for use on metal and timber form work, where it will preserve the timber and prevent corrosion on the metal. Produces a clean and positive release combined with a stain free finish.

Verila® Li Complex EP 2 VG320 HDVT is heavy duty lubricating grease based on lithium complex thickener and high-quality mineral base oils of ISO VG320 viscosity grade. The lithium complex thickener makes the product suitable for applications within a wide temperature range, especially at elevated temperatures where conventional soap-based grease cannot be applied. The product is formulated with the high-tech additive technology which deliver to grease the right balance of performance characteristics and thus prolongs re-greasing intervals. Superior anti-wear [AW] and extreme pressure [EP] performance as well as excellent water resistance, rust and corrosion prevention and high oxidation stability extends bearing life and that means less downtime.

Aztec Oils Limited MOULD RELEASE CC 80 is a hydrocarbon based release fluid formulated principally for the production of molded concrete products. Suitable for use on metal and timber form work, where it will preserve the timber and prevent corrosion on the metal. Produces a clean and positive release combined with a stain free finish.

Aztec Oils Limited MOULD RELEASE CC 40 is a hydrocarbon based release fluid formulated principally for the production of molded concrete products. Suitable for use on metal and timber form work, where it will preserve the timber and prevent corrosion on the metal. Produces a clean and positive release combined with a stain free finish.