Products in Fluids & Lubricants: Gaskets

ReMarcoble Lube™ #83 Conveyor is a plant-derived, petroleum-free lubricant specifically designed to enhance conveyor efficiency and protect equipment from friction. It is highly effective for chain conveyors, belt systems, and turntables, offering optimal performance. This lubricant is safe to use with most rubber seals and gaskets, and it is both petroleum-free and biodegradable. With easy rinsing properties, ReMarcoble Lube™ #83 Conveyor ensures convenient cleaning purposes while maintaining its environmentally friendly characteristics.

ALFA GR-194 FDA is an opaque white heat sink, food grade grease compound. ALFA GR-194 FDA is grease like silicone material, heavily filled with efficient heat conductive zinc oxide and a binding agent, this combination promotes high thermal conductivity, high temperature stability, and the lowest amount of bleed and evaporation. ALFA GR-194 FDA is applied in many industrial applications.

PIPE SLIME™ Pipe Gasket Lube is a unique pipe joining lubricant that has been specially formulated to prevent turbidity, taste, and/or odor problems in new water main installations. PIPE SLIME offers low temperature application and will not promote bacterial growth.

Magnalube® Grease deposits a fine protective and lubricating film on metal parts. It is virtually unaffected by corrosive moisture and will not migrate from hot surfaces. Magnalube-G is water resistant, stable at high temperatures, resists oil separation, and is chemically and mechanically stable. The Teflon® base effectively lubricates at temperatures -40°C to 288°C. The applications are unlimited.

Armite Lubricants A-A-59313 can be used as a lubricant, a sealer, and a tapping compound on plastic as well as metals. The surface need not be cleaned before application unless grit or low quality oil/grease is present. This product reduces assembly friction and increases torque tension by approx. 20%. Use on threaded parts, bushings, gears, valve stems, chain sprockets, levers, hinges, pivots, rollers, heat exchangers, or manifold bolts, or as a gasket release agent. This zinc based anti-seize thread compound is generally used to prevent seizing during assembly and disassembly of threaded or unthreaded aluminum and aluminum alloy components. It also provides protection to metal surfaces.

Black Bear Company 80W140 FULL SYNTHETIC GL-5 (6342) is a full synthetic, premium quality, commercial drivetrain lubricant designed to meet the rigorous demands of extended drain warranty requirements. It provides outstanding performance in heavy duty drivetrains where extreme pressure and shock loading are common. Formulated for extreme cleanliness and superior thermal stability under severe conditions, this oil also offers enhanced friction reduction properties and exceptional shear stability.

NuSil™ MED-9021 is a NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.Fluids are non-curing, stable silicone polymers typically used as lubricants. Fluids are available in a variety of viscosities. Depending on the viscosity, fluids can be applied by spraying, dipping, wiping, or brushing. For optimal performance, the chEMIstry of the fluid should not match the chEMIstry of the substrate being lubricated. If unsure of the compatibility of the substrate and lubricant, contact the supplier of each material for assistance.Because they are so dynamic, fluids can be adapted to perform well in a wide array of projects.Comments: NuSil™ MEDIUM CONSISTENCY GREASE.

Haynes® Anti-Seize & Lubricating Compound is a premium food grade lubricant that meets FDA/NSF incidental food contact requirements. Haynes® Anti-Seize is odorless, colorless, tasteless, and stain-free. This multipurpose grease has a wide range of applications in and around the food processing industry.

Whitlam Multi-Purpose Silicone Grease is a silicone based, moisture resistant, non-curing paste which retains its consistency and properties over a temperature range of -70°F (-56°C) to 400°F (204°C). Designed for use as a waterproof lubricant on faucets valve stems cartridges and is safe for nitrite/rubber O-rings. Contains high raw silicone content making it better for long term lubricant hold & helps hard-turning faucets work smoothly. The grease is water resistant and oxidation resistant. Whitlam Multi-Purpose Silicone Grease helps reduce friction and provides long- lasting lubrication. This product is compatible with most all rubbers and plastics.

BLUE LUBE Pipe Gasket Lube is a unique product that has been specially formulated to prevent turbidity, taste, and/or odor problems in new water main installations. BLUE LUBE will not promote bacterial growth.

Black Bear Company 75W90 FULL SYNTHETIC GL-5 (6332) is a full synthetic, premium quality, commercial drive-train lubricant designed to meet the rigorous demands of extended drain warranty requirements. It provides outstanding performance in heavy duty drive-trains where extreme pressure and shock loading are common. Formulated for extreme cleanliness and superior thermal stability under severe conditions, this oil also offers enhanced friction reduction properties and exceptional shear stability.

NuSil™ MED-6731 is a NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.Fluids are non-curing, stable silicone polymers typically used as lubricants. Fluids are available in a variety of viscosities. Depending on the viscosity, fluids can be applied by spraying, dipping, wiping, or brushing. For optimal performance, the chEMIstry of the fluid should not match the chEMIstry of the substrate being lubricated. If unsure of the compatibility of the substrate and lubricant, contact the supplier of each material for assistance.Because they are so dynamic, fluids can be adapted to perform well in a wide array of projects.Comments: HEAVY CONSISTENCY METHYL FLUORO GREASE.

NuSil™ MED-9031 is a NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.Fluids are non-curing, stable silicone polymers typically used as lubricants. Fluids are available in a variety of viscosities. Depending on the viscosity, fluids can be applied by spraying, dipping, wiping, or brushing. For optimal performance, the chEMIstry of the fluid should not match the chEMIstry of the substrate being lubricated. If unsure of the compatibility of the substrate and lubricant, contact the supplier of each material for assistance.Because they are so dynamic, fluids can be adapted to perform well in a wide array of projects.Comments: HEAVY CONSISTENCY GREASE.

Pyra-SilTM 802 is a thixotropic grease that is widely used in harsh environments for lubricating and sealing vacuum and pressure systems, as well as chemical processing equipment. It has a translucent color and is used in many applications that operate between -40°C and -204°C (-40°F to 400°F), providing excellent thermal stability. Incure 802 is a non-toxic formulation that is also thermally and electrically insulating. Because of its low volatility, it can be used in deep vacuums.

QUICK SLIP PLUS is a non-drying paste lubricant for assembly of pipe joints using rubber or synthetic gaskets. Great for all types of metal or plastic gasketed pipe including Victaulic* type fittings. Works on Wet or Dry Surfaces. Safe for Potable Water Systems. Nontoxic, Noncorrosive, Non-flammable. Adheres to wet or dry pipe. Compatible with FlowGuard® and BlazeMaster® products. QUICK SLIP PLUS is formulated to inhibit growth of all germs and infectious organisms within the oil. Will not promote bacterial growth. It is free of toxic ingredients.

NuSil™ MED-9011 is a NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.Fluids are non-curing, stable silicone polymers typically used as lubricants. Fluids are available in a variety of viscosities. Depending on the viscosity, fluids can be applied by spraying, dipping, wiping, or brushing. For optimal performance, the chEMIstry of the fluid should not match the chEMIstry of the substrate being lubricated. If unsure of the compatibility of the substrate and lubricant, contact the supplier of each material for assistance.Because they are so dynamic, fluids can be adapted to perform well in a wide array of projects.Comments: LOW CONSISTENCY GREASE.

Armite Lubricants Armite No. 609 is an excellent compound for sealing and protecting gaskets, spline assemblies, shaft, and all metal to metal surfaces. With Armite No. 609 on your equipment, you will be assured of easy disassembly, saving you costly down time and maintenance expenses. Armite No. 609 is a must when assembling engines, transmissions, manifolds, and all internal components.

Agrinol Multiplex GL-5 SAE-80W is a mineral gear oil for the lubrication of modern transmissions, differentials, transfer boxes, hypoid rear axles and other transmission components of cars and trucks, off-road and special vehicles for which producer recommends use of lubricants quality level SAE80W API GL-5. It can be used year-round under extremely severe operating conditions, including urban transport operation "Start-Stop".

TALON NICKEL ANTI-SEIZE is an anti-seize lubricant and thread sealant for use in a high temperature environment. TALON NICKEL ANTI- SEIZE is a nickel and graphite based compound composed of pure nickel powder and graphite flake dispersed in a petroleum carrier. TALON NICKEL ANTI-SEIZE will not contaminate catalyst beds, reaction chambers or special alloy fittings. It provides resistance to chemical corrosion and oxidation at temperatures up to 2600°F (1427°C).

Apex Industrial Chemicals Anti-Seize AA05 is a versatile lubricant, thread protector and anti-seizing compound for all engineering applications, especially where high temperature, corrosivity or stress is involved.

Armite Lubricants MIL-PRF-83483 has excellent lubricity and high load capacity, is particularly suitable for use on aircraft spark plugs and threaded fasteners and fittings at temperatures below 800°F.