Products in Plastics: Foaming Agent

Foamazol™ 86 is intended for extrusion and molding applications where lower processing temperatures are used.

Cell.Mix A072/15 is a chemical blowing agent masterbatch used against shrinking/warpage of compact parts.

Poly Chem Alloy PolyFoam 2004CFP are additive masterbatch concentrates containing highly specialized chemical blowing agents. This product was specifically created for the production of microcellular foam structures in a variety of thermoplastic materials. PolyFoam products are available containing endothermic blowing agents, exothermic blowing agents, and as a combination of both.

Ficel® HC ES 4050 is used as Flexible PVC, Rigid PVC, Styrenics, Polyolefin.

MD SC-305F is a Blowing Agent Additive product. It is available in North America. MD SC-305F is compatible with Polyethylene or ethylene-olefin copolymer (PE).

Widely Use of polyester, polyurethane, polyvinyl chloride resins and polycarbonate, PA and other engineering plastics can also be used flame retardant fiber, wood and rubber and plastic products

Endex 1750™ is a 50% concentrate in a polymer carrier. It can be used in a wide range of commodity and engineering plastics, combining quality and efficiency with the benefits of versatility and cost effectiveness.

BTec™ BSI-9135-FP is an endothermic CFA’s chemicals that take heat out and typically produce much smaller cell structure creating improved processing, better physical properties and improved appearance.

Foamazol™ 85 is recommended for applications in polystyrene that require high gas pressure.

Ficel® Extend 01SBH73 is used as Rigid PVC.

Cell.Mix A071 is a chemical blowing agent for injection molding and against shrinking/warpage, starting at about. 155 °C

TRACEL® DB 170 FINE is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

Foamazol™ 81 is recommended for applications requiring a high gas yield.

VINYFOR AC#3 is type blowing agent and its compounds. Its unique minimum decomposition heat temperature characteristics and tan-free properties make it a favorite agent for plastic sheets with thickness.

Foamazol™ 57 is recommended for foaming in injection molding and extrusion.

VINYFOR ST#78 is type blowing agent and its compounds. Its unique minimum decomposition heat temperature characteristics and tan-free properties make it a favorite agent for plastic sheets with thickness.

Ficel® Extend 49SBH37 is used as Rigid PVC.

Foamazol™ 63 is intended for extruded ribbons and sheets where very fine celled foam is desirable.

Foamazol™ 84 is a free flowing powder designed for use in PVC applications. This product combines the benefits of both endothermic exothermic CFAs to produce controlled gas yields and obtain uniform cell structures.

Fascom™ Natrium P is a fine particle, treated Sodium Bicarbonate.

TRACEL® TSE 7142 TP 1102 is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

Foamazol™ 94 is recommended for applications where good dispersion is important and a small amount of foam is necessary.

Otsuka Chemical Unifoam AZ ultra #1195-I have been developed with powder technology and surface treatment technology to avoid caking and dust pollution. UNIFOAM AZ is the most widely used foaming agent for plastics and rubbers. We have recently developed UNIFOAM AZ ULTRA. This new foaming agent has perfect anti-caking qualities, is free flowing, and has a low percentage of dust.

BTec™ BSI-9135-VFP is an endothermic CFA’s chemicals that take heat out and typically produce much smaller cell structure creating improved processing, better physical properties and improved appearance.

VINYFOR AC#R is type blowing agent and its compounds. Its unique minimum decomposition heat temperature characteristics and tan-free properties make it a favorite agent for plastic sheets with thickness.

Foamazol™ 61 is intended for applications where maximum density reduction is required at relatively low processing temperatures. It is suitable for low pressure structural foam, injection molding, and extrusion.

Cel-Span® CFA 897 is a 40% active endothermic foaming agent concentrates recommended for extrusion applications for a variety of thermoplastic resins such as polyethylene, polypropylene, styrenics, MPPO and ABS. Cel-Span® CFA 897 is recommended for extrusion, and structural foam molding of polyolefins, polystyrene, MPPO and ABS. This product exhibits a very fine cell structure compared to a typical endothermic foaming agent in extrusion applications.

Fascom™ CS Ultra is a very highly activated ADC for PVC processing (Liquid Dispersion Only).

Endex 2650™ is a high efficiency pelletized concentrate, in a thermoplastic polymer carrier. It is designed for use in both commodity and engineering plastics, and may be dried with the polymer if needed. It combines its endothermic properties, quality and efficiency, with versatility and cost-effectiveness

Foamazol™ 70 is recommended for applications where very fine celled foams are required.

Fascom™ CS Define is a highly activated ADC for inhibition PVC plastisols.

BTec™ BSI-9170-FP is an endothermic CFA’s chemicals that take heat out and typically produce much smaller cell structure creating improved processing, better physical properties and improved appearance.

TRACEL® G 5138 MFW is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

Foamazol™ 72 is intended for applications that require a very fine and uniform cell structure for with relatively smooth skins.

Cell.Mix B037 Grit is a ADC-free acrylate-copolymer-mixture, containing benzoxazine/carbonate-preparation.

Fascom™ CS Plus is a highly activated ADC for PVCu and rubber processing.