Products in Plastics: Anti-Static Agent

Toho Chemical Industry SP-151 is newly developed and use for PP including injection molding, films and sheets of Automobile industry.

MLPlastics Additive Masterbatches PE PEA6005 is a polymer based additive masterbatch containing effective substance in PE carrier resin. Acts as an antistatic agent. Offers permanent static dissipation performance. It forms a conductive polymer matrix in the host polymer. With proper processing procedures, products with permanent moisture independent static dissipation levels of 10E9 to 10E12 Ohms.sq. surface resistivity are obtainable. Compatible with polyolefins.

The extensive use of petroleum-derived polymers is responsible for the increasing concern about the environmental impact of plastics, since most of them are not biodegradable. Worldwide polymer production is estimated to increase: it is considered that in 2020 each person will consume around 40 kg of plastic annually. In this scenario, bioplastics emerge as an alternative to conventional plastics and among biopolymers VIBATAN® PLA BLACK N0381) is currently considered one of the most promising biopolyester at industrial scale, due to its good balance between physicochemical properties and sustainability.

MECOSTAT-3/145 Surface Antistatic Agent is a highly effective liquid coating material forthe antistatic finishing of plastic surfaces as well as for improving slip properties.The coating´s resistance to temperature ensures that subsequent thermoforming can beperformed without suffering any damage. Furthermore, the antistatic finishing of thematerial remains virtually unaffected by the stretching of the material during the thermoforming process.

ANTISTATIC MB 03(SV 91A003AS) is used for PE Foam, refrigerator, washing machines PE Film & other applications of PE and it having advantage of Prevent to develop Electrostatic charge.

MECOSTAT-3/09 surface antistatic agent is a highly effective liquid coating material for the antistatic finishing of plastic surfaces as well as for improving slip properties. The coating´s resistance to temperature ensures that subsequent thermoforming can be performed without suffering any damage. Furthermore, the antistatic finishing of the material remains virtually unaffected by the stretching of the material during the thermoforming process.

WellsStat - Antistatics can be added to polymers to minimize the natural tendency of most plastics to accumulate static charges. Antistatics are based mainly based on migratory additive systems, which can give fast and long term stable antistatic properties. Migratory additives rely upon the presence of atmospheric humidity to give optimum performance.

Vatan Plastik San. Tic. AS ANTISTATIC MB 071 PP produced while carrying out production in polyoefins, static electric is gathered on the plastic product. Therefore, product gather excessive amount of dust. Such products used in automatic packaging machinery causes damage because of static electricity. Anti-static concentrated usage prevents the occurrence of static electric on the plastic product.

avanION 39 is a material widely used in industry in both rigid and foamed applications. The final density obtained as well as the type of polyol play a crucial factor in the antistatic characteristics of the system. avanzare has developed a variety of products that, depending on the type of application and foam structure, can be used as the main and unique antistatic agent or as synergistic with other products on the market.

MATER 53 EF is a stearic acid made from from tallow. Depending on the volume solicited, vegetable oils can also be used as raw materials.

avanDISS 378 is a line of polymeric masterbatches based on polyester resins, capable of producing permanent and colourable antistatic systems. The generation of permanent antistatic systems is produced thanks to the generation of percolation networks of third polymers inside the polymer to be treated. Avanzare has designed its product line avanDISS, MB polymer products specially designed to generate three-dimensional structures in base polymers.

Toho Chemical Industry SA-35 is used as anti-static for PP.

FloTube™ 6801 CP100-6A10 PC MB 10% contains 10% 6801FloTube™ carbon nanotubes with a smooth surface and good dispersion in the masterbatch.

Silma AY1056 is a masterbatch containing antistatic agents dispersed in styrene polymer. It's particularly effective for styrene polymers (cristal and shock-proof types) in injection molding and extrusion processes. Suitable for packaging with direct contact with food and drink. Its action will explicate at over 50% relative air humidity.

Toho Chemical Industry SP-10 is used for blended inorganic additive PP injection molding with a small additive amount and also for HDPE blow-molding. It is applicable as food packaging material (PL registered & FDA approval).

Avannatur Evastat 850 as well as the micro-expanded granulated eva are two of the most used eva applications today. Thus, its use in orthopedic plants, templates, construction plates, as well as in any injected piece are gaining ground against other competing products due to their low weight, ease of work and properties. One of the main handicaps that the producers and users of this product is the extremely low electrical conductivity that the eva presents, which together with its use in the form of foam generates, a material with enormous problems of electrostatic discharges and therefore usage problems.

MECOSTAT-3/725 is a highly effective liquid coating material for the antifogging, antistatic andantiblocking finishing of plastic surfaces as well as for improving slip properties.Antifogging agents prevent condensation on the surface of the plastics and bring clear visibility.The resistance of the coating to temperature ensures that subsequent thermoforming can beperformed without loosing the antifogging, antistatic or antiblocking properties.MECOSTAT-3/725 is based on isopropanol solvent and is very suitable for theapplication on flexographic and gravure printing systems.

Libstat CDA is an antistatic agent effective for many thermoplastics especially Polyolefins & Polystyrene. Oleochemical derivative containing Nitrogen.

AS 10 is an antistatic additive with PE Resin.

FloTube™ 9101 CP240-9A10 PBT MB 10% contains 10% 6101FloTube™ carbon nanotubes with a smooth surface and good dispersion in masterbatch.

Libstat 1518 is a Nitrogen free oleochemical derivative. Highly effective Antistatic agent for ABS extruded and molded products.

MD AB-720 is an Antistatic Agent Masterbatch product. It is available in North America.

Avannatur Evastat (S) as well as the micro-expanded granulated eva are two of the most used eva applications today. Thus, its use in orthopedic plants, templates, construction plates, as well as in any injected piece are gaining ground against other competing products due to their low weight, ease of work and properties. One of the main handicaps that the producers and users of this product is the extremely low electrical conductivity that the eva presents, which together with its use in the form of foam generates, a material with enormous problems of electrostatic discharges and therefore usage problems.

MECOSTAT-3/562 is a highly effective liquid additive for antistatic finishing ofexpandable polystyrene and polypropylene.The antistatic agent acts even at a low relative humidity and provides a stable,permanent antistatic finishing for several years.

avanION 5 is a material widely used in industry in both rigid and foamed applications. The final density obtained as well as the type of polyol play a crucial factor in the antistatic characteristics of the system. avanzare has developed a variety of products that, depending on the type of application and foam structure, can be used as the main and unique antistatic agent or as synergistic with other products on the market.

Polyten AP82060 is a antistatic used in film /injection/blow molding.

FloTube™ 6101 CP300-6A10 ABS MB 10% contains 10% 6101FloTube™ carbon nanotubes with a smooth surface and good dispersion in the masterbatch.

Antistatic Agent -1 is fatty acid ester based additive masterbatch containing 10% of the effective substance in carrier resin.

Toho Chemical Industry SA-7MB is modified from anti-static agent of OPP [SA-300] and improvement of the effectiveness of anti-blocking rating.

MECOSTAT-3 surface antistatic agents are highly effective liquid coating materialsfor the antistatic finishing of plastic surfaces as well as for improving slip properties.The coating´s resistance to temperature guarantees that subsequent thermoformingcan be performed without suffering any damage.Furthermore, the antistatic finishing of the material remains virtually unaffected bythe stretching of the material during the thermoforming process.

avanION 13 is a material widely used in industry in both rigid and foamed applications. The final density obtained as well as the type of polyol play a crucial factor in the antistatic characteristics of the system. avanzare has developed a variety of products that, depending on the type of application and foam structure, can be used as the main and unique antistatic agent or as synergistic with other products on the market.

M.G. Polyblends Antistatic Masterbatchis developed by M.G. Polyblends Antistatic masterbatch based on a new generation, high activity Nitrogen-free antistat additive. It specifically effective in providing static electricity control in polyolefins. It's efficiency is measured by determining the surface resistivity of the plastic surface in which this masterbatch has been used.

Baoding Lucky Chemical LkasP Anti-Static Agent is recommended as coating material for glasses and plastics, such as PET, PC, PS, PP, PE, etc.

PP Antistatic MB is a blend of fatty acid amide based additive masterbatch containing 10% of the effective substance in carrier resin. It acts as an antistatic agent.

HECO®STAT 223 PE is a antistatic mixture with 12% active agents, components short and long term antistatic.

avanSTATIC Rubber is a very diverse material, with many different applications and formulas, so the additive and the amount needed vary greatly depending on the type of rubber, formula, polarity of the mixture, etc…