Products in Basic Thermoplastics: Extrusion Coating

SBC818 is a low-density polyethylene specially formulated for coating processes. This grade exhibits excellent optical properties, minimal neck-in during processing, film stability, and strong adhesion on porous substrates. It does not contain any additives. Moreover, it has a minimum carbon biobased content of 95%, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

SBC818R50 is a low-density polyethylene specifically designed for coating processes. This grade showcases exceptional optical properties, low neck-in, film stability, and strong adhesion on porous substrates. It is free from additives. Notably, it possesses a minimum carbon biobased content of 50%, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

Aegis® PIR-H85NP resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H85NP, its standard, non-recycled counterpart.Aegis® PIR-H85NP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown BOPA film. It offers a combination of strength, toughness and thermoforming properties as well as excellent heat, chemical and abrasion resistance.

EXTINITY® 0201-312 is a highly loaded antimony trioxide concentrate that can be used for a variety of applications including film, sheet, and extrusion coating. The content of antimony trioxide in EXTINITY® 0201-312 is 80%, by weight. Use of EXTINITY® 0201-312 eliminates the exposure hazards typically associated with handling antimony trioxide powder, since all of the antimony trioxide powder is dispersed, distributed and encapsulated in a LDPE carrier resin.

Sylvin Technologies Sylvin™ 8377-75UV Black 2101 is a RoHS & reach compliant, vinyl compound formulated for vinyl coated nylon yarns for braiding harness type constructions of electrical wiring systems.

L-270A is the polypropylene Copolymer manufactured by under the Spheripol process. This grade is designed to potential end use applications include Extrusion coating on Woven and Kraft paper. Low neck-in, High speed process ability, Good adhesive property to paper and Kraft paper, Oil & moisture permeation resistance.

Lumitac® Lumitac® is an Ultra Low Density Polyethylene material. It is available in Asia Pacific, Europe, or North America for blow molding, blown film, extrusion coating, injection molding, or laminating. Primary attribute of Lumitac® Lumitac®: Good Processability.Typical applications include: Bags/Liners Film Household Applications Packaging

Sylvin™ 83028-90 Orange 5112 is a vinyl compound formulated for extruded yarn coating applications that require higher heat resistance.

POLYMER-E V18251 is an ethylene vinyl acetate copolymer resin(EVA) for high-speed extrusion coating applications. POLYMER-E VI 8251 is ideal for thermal lamination film with BOPP PET substrate in printed or package product

Hanwha Solutions LDPE 950 is manufactured by autoclave process and designed for variety of extrusion coating application such as aseptic paper can, flexible packaging, paper coating etc. LDPE 950 is well known for its good draw-down characteristics and high quality assurance. This product complies with U.S. FDA regulation 21 CFR 177.1520 (c) 2.1.

Characteristics: Control reologhy high melt flow rate narrow molecular weight distribution Homopolymer polypropylene, lot to lot consistency, with special additives package and high cleanness, to get stable spinning processability in low denier fiber at high speed, good gas fading resistant. Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, melt spinning of low denier fibers, extrusion coating of raffia woven fabrics, general purpose injection molding applications.

Hanwha Solutions LDPE 963 is manufactured by autoclave process and designed for variety of extrusion coating application such as paper and Tarpaulin coating etc. LDPE 963 is well known for its excellent processability and high quality assurance. This product complies with U.S. FDA regulation 21 CFR 177.1520 (c) 2.1.

Sylvin™ 83028-90 Black is a vinyl compound formulated for extruded yarn coating applications that require higher heat resistance.

Sylvin™ 8386-85 Yellow 4195 is a vinyl compound formulated for vinyl coated nylon yarns.

Hanwha Solutions LDPE 961 is manufactured by autoclave process and designed for variety of extrusion coating application such as flexible packaging, paper coating etc. LDPE 961 is well known for its excellent neck-in, draw-down and high quality assurance. This product complies with U.S. FDA regulation 21 CFR 177.1520 (c) 2.1.

Sylvin™ 6231-85 Black is a flame retarded vinyl compound formulated for yarn coating applications.

Sylvin™ 8378-85 Black is a vinyl compound formulated for vinyl coated nylon yarns.

Sylvin Technologies Sylvin™ 8377-75UV Yellow 4209 is a RoHS & reach compliant, vinyl compound formulated for vinyl coated nylon yarns for braiding harness type constructions of electrical wiring systems.

Characteristics: Control reologhy high melt flow rate Homopolymer polypropylene, excellent uniformity in the spinning of low-denier fibers at high speed and easy mold filling, good balance "stiffness/impact" Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, extrusion and spinning of low denier fibers, extrusion coating of raffia woven fabrics, Injection thin wall articles and short cycle times, general purpose injection molding applications.

72307E is a LLDPE produced by the Spherilene Technology 72307E can be used in Extrusion Coating on HDPE Woven Fabric, Aluminum Foil, Jute, Paper & Allied Substrates The precise morphological control achieved during polymerization confers superior processability and improved performance properties not available in conventional LLDPE

Characteristics: Controlled rheology polypropylene homopolymer, medium molecular weight distribution, with high fluidity, with special additives for use on thin coatings at high line speeds to obtain excellent uniformity and adhesion, low neck-in, and thinning (draw-drown) and good properties. Recommended for: Extrusion coating of raffia, paper and other substrates, aluminum and paper laminating.

Sylvin™ 83054-90 Black is a vinyl compound formulated for general pupose low cost extruded coated yarn applications.

Sylvin™ 6246-85 Black is a flame retarded vinyl compound formulated for yarn coating applications.

Sylvin™ 8378-85 Yellow 4202 is a vinyl compound formulated for vinyl coated nylon yarns.

Sylvin™ 8376-92UV Yellow 4209 is a high performance RoHS & reach compliant vinyl compound formulated for vinyl coated nylon yarn applications.

NUC-3461 is Recommended for Extrusion Coating. EEA can be used at higher processing temperature than EVA because of its excellent thermal stability. And EEA has superior adhesiveness to paper and sealing properties than EVA. EVA, which has good sealing properties and high speed processability, is widely used as thermal lamination films. Additive free products without antioxidant can be used with peace of mind for food applications such as easy peel films.

Sylvin™ 6034-90 Clear Black 2107 is a vinyl compound formulated for yarn covering applications.

Lotrene® LA 0710 is a low density polyethylene mainly recommended for the extrusion coating at high speed. It contains no additive.

Sylvin™ 8376-92UV Black 2101 is a high performance RoHS & reach compliant vinyl compound formulated for vinyl coated nylon yarn applications.

Sylvin™ 83029-75 Black is a vinyl compound formulated for extruded yarn coating applications.

PETILEN H5-21T is a low density polyethylene resin produced by high pressure tubular process. Having medium average molecular weight, the product is developed for general purpose applications. PETILEN H5-21T contains no additives.

Sylvin™ 6246-85 Yellow 4195 is a flame retarded vinyl compound formulated for yarn coating applications.

Sylvin™ 6247-85 Black is a flame retarded vinyl compound formulated for yarn coating applications that require better abrasion resistance than Sylvin™ 6246-85 Black.

Sylvin™ 8376-92UV Black 298 is a high performance RoHS & reach compliant vinyl compound formulated for vinyl coated nylon yarn applications.

Lotrène® LA 0710 is mainly recommended for the extrusion coating at high speed. It contains no additive.

Sylvin™ 83028-90 Yellow 4202 is a vinyl compound formulated for extruded yarn coating applications that require higher heat resistance.