Products in Pigments & Colorants

DCL 7254 DPP Red, PR.254 (BO type) is a medium red shade DPP pigment that offers excellent masstone weather fastness, heat stability, acid, alkali and solvent resistance. It is recommended for high-end coatings and high-end plastics applications, especially exterior uses where excellent fastness properties are required. Moreover, this pigment is FDA-approved.

DCL A3R Indanthrone Blue, PB.60 is a red shade of highly saturated blue that combines very good tinctorial properties with excellent fastness properties. DCC Blue A3R is a highly transparent blue suitable for opaque and effect shades and is used in high-end coatings, plastics, and ink applications.

DCL Blue 10G551 is a dark blue-green powder produced by solid-state reactions at high temperatures. This pigment has good UV and visible opacity, good acid and alkali resistance, is chemically inert, heat-resistant, and stable to ultraviolet light. It is non-bleeding and non-migratory, and complies with ASTM C979 (Pigments for Integrally Colored Concrete). Typical applications (non-inclusive) include concrete, stucco, grout, ceramic bodies, and low zinc glazes.

DCL CARMINE B Naphthol Red, PR.5 is a bright blue-shaded red pigment used primarily in offset and water based inks. It also finds use in decorative and industrial paints. It also exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability.

DCL 2181 Benzimidazolone Yellow, PY.181 is a red-shaded, non-warping yellow pigment that exhibits excellent lightfastness and resistance properties along with heat stability. This pigment is mainly recommended for a variety of plastic applications and is approved by the FDA under Section 178.3297.

DCL Black 376A is a jet-black powder produced by high-temperature calcination. It has good UV and visible opacity, high infrared reflection, and is chemically inert, heat-resistant, and stable to ultraviolet light. It is non-bleeding, non-migratory, has low heat build-up, exceptional durability, and exceptional hiding power, and is compatible with most resin systems and polymers. It is also non-warping and is generally used in applications where resistance to heat, light, and weather are needed, such as liquid and powder coatings, inks, dispersions, and plastics.

DCL 1810M Syn Micronized Yel Iron Oxide, PY.42, consists of lanox iron oxide and has superior dispersibility and improved hiding. It is FDA-approved (Section 178.3297), and has a wide range of applications, including use in plastics such as PVC and PE, as well as decorative and industrial coatings.

DCL 1403B 2B Red, PR.48:3 is a yellow-shaded red pigment 48:3. This product is a good alternative to barium lithol pigments with good wax bleed resistance. DCL 1403B 2B Red is yellower than Red 48:2. It is recommended to be used in plastic, ink, and coating applications.

DCL 1820M Syn Micronized Yel Iron Oxide, PY.42 is a synthetic micronized yellow pigment that has superior dispersibility and improved hiding. 1820M is darker and more red in shade compared to 1810M and it is FDA-approved under section 178.3297.

DCL 1144 Disazo Red, PR.144 is a medium to slightly blue-shade red pigment with high purity, tinting strength, and excellent heat stability. It is primarily used in the coloration of plastics such as PVC, ABS, polystyrene, polyolefins, and polyester spin dyeing, and is also used in some specialty coatings and inks, though it can cause warpage in HDPE.

DCL 2110 Isoindolinone Yellow, PY.110 is a transparent, red shade yellow pigment with excellent lightfastness and good heat stability. 2110 Isoindolinone Yellow, PY.110 is slightly more transparent and redder than 2111. This product is also approved by the FDA under section 178.3297.

DCL 7354 DPP Red, PR.254 is a yellow-shaded DPP that offers excellent opacity, high color saturation, weather resistance, heat stability, acid, alkali, and solvent resistance. It is recommended for high-end coatings and high-end plastics applications, and is FDA compliant for indirect food contact plastic applications.

DCL 1354 DPP Red, PR.254 (2030 type) is a very opaque, bright medium shade red pigment, coloristically yellower and cleaner than the 1254 grade. It exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of plastics, inks, rubber and coating applications.

DCL RMXS Bismuth Vanadate, PY.184 is a bright lemon shade yellow pigment designed to have the highest color strength of any Bismuth Vanadate pigment available, boasting outstanding hiding power. This pigment offers maximum value, requiring less pigment in formulations and providing a lower environmental impact, as well as excellent weather fastness and resistance properties.

DCL 7168 Anthanthrone Red, PR.168 is a high-performance, bright yellow-shade red pigment for use in high-end coating applications. It is most notably used in exterior architectural systems, as its superior weather fastness in light tones makes it ideal for such applications.

DCL 3136 Phthalocyanine Green, PG.36 is a strong, yellow-shaded, fully brominated phthalocyanine green pigment of excellent value, tinting strength, and color purity. 3136 has excellent overall properties. It is recommended to be used in a wide range of plastic, ink, and coating applications.

DCL HRO Diarylide Yellow, PY.83 has good weathering durability, fastness to heat, solvents, and acids/alkalis, as well as excellent opacity. This makes it a cost-effective choice for industrial fast-drying and oven-cured coatings to achieve mid- to red-shaded saturated yellows, making it an ideal alternative for medium chrome pigments.

DCL Y933 Lemon Yellow, PY.34 is a standard lemon chrome yellow pigment, mainly used in plastics and coatings. It exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. The applications of this product are restricted to industrial and professional inks, coatings, plastics and roadmarking applications (subject to regional legislation).

DCL Brown 10C873 is a dark brown powder produced by high-temperature calcination. It has good UV and visible opacity, high infrared reflection, and is chemically inert, heat-resistant, and stable to ultraviolet light. Furthermore, it is non-bleeding, non-migratory, has exceptional durability and hiding power, and is generally used in applications requiring resistance to heat, light, and weather. Additionally, it is compatible with most resin systems and polymers, and is non-warping. Typical applications (non-inclusive) include liquid and powder coatings, inks, dispersions, and other applications where equivalent pigment chemistry is used.

DCL 7170 Naphthol Red, PR.170 is a high-performance version of Pigment Red 170 chemistry, offering a yellow-shaded red for use in demanding coating, plastic, and ink applications. It has improved hiding and lightfastness compared to standard Pigment Red 170, and is the only drop-in match to F3RK-70 in the opaque, yellow-shaded PR-170 segment.

DCL S-152 Diarylide Yellow, PY.152 is a reddish-shaded diarylide yellow pigment with a moderately good level of opacity. It boasts excellent overall resistance properties, lightfastness, and heat stability, making it a reliable and versatile choice for various industrial coating applications.

DCL 5035 Lemon Yellow, PY.34 is a pre-darkened, SO2-resistant, high-performance lemon shade yellow pigment with stir-in properties and is recommended for high-end coating and plastic applications. This product is restricted to industrial and professional inks, coatings, plastics, and roadmarking (subject to regional legislation).

DCL 7336 Benzimidazolone Orange, PO.36 is a high performance blue shade orange pigment, ideal for use in high-end coating applications that require excellent weather fastness, heat stability, chemical resistance, rheology, and dispersion. It is suitable for use in all coatings but is particularly recommended for the most demanding applications.

DCL 2GLMA Bismuth Vanadate, PY.184 is renowned for its highly saturated, bright yellow shades, outstanding opacity, chemical resistance, excellent weathering, and durability across the color gamut from pale tints to masstone. It is the standard reference for both solvent and waterborne systems in automotive, coil and other high-performance paints. Additionally, its superior covering power and durability make it a popular choice for general industrial paints.

DCL 5033 Lemon Yellow, PY.34 is a pre-darkened, SO2-resistant, high-performance lemon shade yellow pigment with stir-in properties and is recommended for coating and plastic applications. This product is restricted to industrial and professional inks, coatings, plastics, and roadmarking (subject to regional legislation).

DCL Yellow 10C112E is a bright yellow powder produced by high-temperature calcination that has good UV and visible opacity and is chemically inert, heat-resistant, and stable to ultraviolet light. It is non-bleeding and non-migratory, with exceptional durability and hiding power, and is generally used in applications where resistance to heat, light, and weather are needed. It is compatible with most resin systems and polymers and is non-warping; typical applications include plastics and other similar uses.

DCL 8330M Syn Micronized Black Iron Oxide, PBk.11 is the stronger, slightly bluer shade by DCL, composed of micronized black iron oxide, and is FDA-approved (Section 178.3297). It is suitable for use in various plastic applications, including PVC, PE and PP, as well as decorative, industrial, and powder coatings.

DCL 1812 Naphthol Red, PR.112 is a deep shade red naphthol with very good lightfastness even in medium shades. 1812 is somewhat sensitive to blooming at very low concentrations. It also exhibits good overall resistance properties, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of inks and coating applications.

DCL 410 Carbon Black, PBk.6 (Granular) is a smaller particle size, low cost granular carbon black pigment. It is the most jet of our low-cost carbon blacks however, it has the highest viscosity. 410 is particularly suitable for coatings, plastics requiring excellent UV properties, and solvent-based inks.

DCL 8318M Syn Micronized Black Iron Oxide, PBk.11, is the yellow shade in DCL's micronized black iron oxide range, and is FDA-approved (Section 178.3297). It finds applications in plastics such as PVC and PE, as well as in decorative and industrial coatings.

DCL 2792 Metal Azo Red, PR.48:4 is a very intense, medium performance blue shade red pigment, designed to be yellower in shade than DCC Red 2790. It is laked with manganese, which improves its stability, resistance properties, and increases its chroma, opacity, and gloss. Its good to excellent solvent resistance makes it well-suited for fast air drying and oven-cured industrial applications.

DCL Blue 3J is a dark blue powder produced by high-temperature calcination that has good UV and visible opacity, is chemically inert, heat-resistant, and stable to ultraviolet light. It is non-bleeding, non-migratory, has exceptional durability and hiding power, and is generally used in applications where resistance to heat, light, and weather are required. It is compatible with most resin systems and polymers and is non-warping, making it suitable for use in liquid and powder coatings, inks, dispersions, concrete, plastics, and other applications where equivalent pigment chemistry is used.

DCL UPL-A105 Ultramarine Blue, PB.29 (medium green shade) is a medium green shade of ultramarine blue pigment, with good alkali resistance. It is FDA-approved (Section 178- 3297) and exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of plastics and coating applications.

DCL 3GMX Bismuth Vanadate, PY.184 is a new generation of Bismuth Vanadate pigment from Dominion Color Corporation that offers a highly attractive, greenish yellow shade with an exceptional color strength, high gloss, clean shade, and easy dispersion. It has been developed to be particularly suitable for industrial coatings.

DCL 8817 Transparent Red Iron Oxide, PR.101 is a high performance transparent red iron oxide offering high color strength, weather resistance, and UV protection properties. 8817 is recommended for PVC plastics, automotive, aerospace, industrial, powder, and wood coatings, as well as solvent flexo inks.

DCL Black 30C965 is a jet-black powder produced by high-temperature calcination. It has good UV and visible opacity, is chemically inert, heat-resistant, and stable to ultraviolet light. It is non-bleeding and non-migratory, and has exceptional durability and hiding power. It is compatible with most resin systems and polymers, and it is non-warping. Typical applications include liquid and powder coatings, inks, dispersions, concrete, plastics, and other applications where equivalent pigment chemistry is used.