Products in Dispersions & Masterbatches: Orange

ELASTOSIL® Color Paste PT Orange RAL 2004 is a ready-to-use masterbatch comprising specific pigments and reactive silicone polymers that are commonly used to produce ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without significant impairment of the physical properties (e.g. hardness) and without migration, as may be observed for systems based on silicone oil.

ELASTOSIL® Color Paste FL Orange RAL 2004 F is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® Color Paste PT Orange RAL 2004 F is a ready-to-use masterbatch comprising specific pigments and reactive silicone polymers that are commonly used to produce ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without significant impairment of the physical properties (e.g. hardness) and without migration, as may be observed for systems based on silicone oil.

MOCOM Compounds ALCOLOR® Function PA AO A OR3058-12 is a polyamide-based colorant with a light fastness of blue woolscale 7 and an orange color, similar to RAL 2010. It is free from cadmium, lead, and diarylide pigments and has a high dispersibility, a high additive content, and is dust-free. It is suitable for injection molded parts, blow molded parts, and extruded parts and should be pre-dried at 80°C in a dry air (dessiccant) dryer for 2-12 hours depending on moisture content.

MOCOM Compounds ALCOLOR® Function SAN UV A OR3070-09 is a 4% dosage injection molding colorant that is dependent on wall thickness and required color intensity for use in Acrylonitrile/Butadiene/Styrene/Copolymer, Styrene/Acrylonitrile/Copolymer and Acrylonitile/Styrene/Acrylate/Copolymer. It is orange in color, UV stabilized, free from cadmium, lead and diarylide pigments, with a light fastness colorant of blue woolscale 6, a filler/additive system consisting of a light stabilizer, high additive content, dust-free and high dispersibility. It is designed for electrical and electronic, furniture, building and construction, and sports and leisure applications.

MOCOM Compounds ALCOLOR® ABS A OR72-4082 is an orange-colored Acrylonitrile/Butadiene/Styrene (ABS) copolymer designed for use in injection molding and extrusion applications in various market segments such as electrical and electronic, furniture, building and construction, and sport and leisure. It has a high dispersibility and high additive content and is free from cadmium, lead, and diarylide pigments.

MOCOM Compounds ALCOLOR® PA A OR3155-11 is a light fastness colorant in blue woolscale 3 with a base polymer of Polyamide 6, similar to RAL 2005 in orange color. The dosage for extrusion and injection molding, depending on the application and operational area, is 3.0%. It is free from cadmium, lead and diarylide pigments, dust-free, and has a high dispersibility and additive content. It is suitable for use in Polyamide and is mainly used in electrical and electronic, furniture, building and construction, and sport and leisure applications.

MOCOM Compounds ALCOLOR® PA A OR922-3356 is a colorant for use in Polyamide, with a similar color to RAL 2003. It has a dosage of 3.0% extrusion and 3.0% injection molding, depending on wall thickness and required color intensity. It is free from cadmium, lead, and diarylide pigments, and has a high additive content, making it dust-free and highly dispersible. It is suitable for automotive, machinery, electrical, and electronic applications.

MOCOM Compounds ALCOLOR® PC FC OR5017-15 is a colorant with a color similar to RAL 1032 and RAL 1004. It is free from cadmium, lead, and diarylide pigments, and has high dispersibility, making it suitable for polycarbonate applications. These applications include electrical and electronic, furniture, building and construction, and sport and leisure, and it is also dust-free.

MOCOM Compounds ALCOLOR® PA OR5067-17 is a colorant based on Polyamide 6, with an orange hue similar to RAL 2003. It is free from cadmium, lead, and diarylide pigments, and has a high additive content, making it dust-free and highly dispersible. This colorant is suitable for use in Polyamide and is used in various market segments, such as Automotive, Electrical and Electronic, Furniture, Building and Construction, and Sport and Leisure. It is suitable for application in blow molded, extruded, and injection molded parts.

MOCOM Compounds ALCOLOR® Function PA UV OR5080-17 is a blue woolscale 7 light fastness colorant with a dosage of 2.0% extrusion and 2.0% injection molding depending on the application and operational area. It contains no cadmium, lead or diarylide pigments, is dust-free, and has a high dispersibility and high additive content. It is used in electrical and electronic, furniture, building and construction, and sport and leisure markets and is suitable for injection molded parts, blow molded parts, and extruded parts.

MOCOM Compounds ALCOLOR® PA A OR5030-15 is a colorant for Polyamide 6 and is orange, similar to RAL 2002. It has a dosage of 2.0% extrusion and 2.0% injection molding, depending on wall thickness and required color intensity. It is free from cadmium, lead and diarylide pigments, dust-free, and has high dispersibility and high additive content. It is suitable for applications such as blow molded parts, extruded parts and injection molded parts in the electrical and electronic, furniture, building and construction, and sport and leisure markets. Its thermal stability is up to 280°C and is suitable for a wide range of applications.

MOCOM Compounds ALCOLOR® SAN OR5048-16 is a colorant for use in Styrene/Acrylonitrile/Copolymer, Acrylonitrile/Butadiene/Styrene/Copolymer, Acrylonitile/Styrene/Acrylate/Copolymer, Polystyrene, polycarbonate +Acrylonitrile Butadiene Styrene Blend with a color similar to RAL 2004. It is free from cadmium, lead and diarylide pigments, is dust-free, and has a high dispersibility and additive content. The dosage of 2.0 % for extrusion and 2.0 % for injection molding is dependent on wall thickness and required color intensity, and varies depending on the application and operational area.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM Orange Concentrate is an orange color concentrate designed for use in medium to high flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE 7 Orange Concentrate is an orange color concentrate designed for use in low and medium flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® C-88A and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 108 Orange Concentrate is an orange-colored concentrate designed for use in high-flow FEP (fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Daikin Neoflon® FEP NP-108 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 100 Orange Concentrates are orange-colored concentrates designed for use in low-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrates are based on Chemours Teflon® FEP 100 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ PFA 3000 Orange Concentrate is an orange-colored concentrate designed for use in high-flow PFA (Perfluoroalkoxy) for pigmentation. The color concentrate is based on Fluon® PFA P-62X and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ PVDF Orange 10 Concentrates are orange-colored concentrates designed for use in PVDF (Polyvinylidene fluoride) for pigmentation. The color concentrates are based on Arkema Kynar® PVDF 2850-04 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ PFA 2100 Orange Concentrate is a orange color concentrate designed for use in medium flow PFA (Perfluoroalkoxy) for pigmentation. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. It is used in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 9800 Orange Concentrate is an orange-colored concentrate designed for use in high-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Chemours Teflon® FEP TE-9494 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 9400 Orange Concentrate is an orange-colored concentrate designed for use in high-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Chemours Teflon® FEP TE-9494 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM HT Orange Concentrate is an orange-colored concentrate designed for use in medium to high-flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM-HT and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 102 Orange Concentrates are orange-colored concentrates designed for use in high-flow FEP (fluorinated ethylene propylene) for pigmentation. The color concentrates are based on Neoflon® FEP NP-102 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

ECOTINT® SMART ORANGE O1 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® PREMIUM ORANGE OXIDE OOX 2 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC ORANGE A2-O colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® PREMIUM ORANGE IRON OXIDE OOX 1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® ORANGE OXIDE YOX are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® ORANGE OR2 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB ORANGE 06 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® ORANGE OR1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® PREMIUM ORANGE ORO 1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

Prismagum-G Orange A686 belongs to Prisma Colors' standard single pigment rubber masterbatch product range which are granulated into a small chip for easy dosing and quality dispersion.The product is also available in slab form and can be dispersed in different polymer types.Please contact us for more information

UltraPlus Orange 62108 is a Diketo-pyrrolo-pyrrole universal colorant designed for depot or in-plant volumetric machine dispensing.