Products in Dispersions & Masterbatches: Brown

ELASTOSIL® Color Paste PT Light Brown RAL 8003 is a ready-to-use compound comprising specific color pigments and a reactive silicone polymer, which is commonly used in ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without interference of the physical properties (e.g. hardness) and without migration as observed with silicone oil.

ELASTOSIL® Color Paste PT Brown RAL 8015 is a ready-to-use compound comprising specific color pigments and a reactive silicone polymer, which is commonly used in ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without interference of the physical properties (e.g. hardness) and without migration as observed with silicone oil.

ELASTOSIL® Color Paste FL Brown Red RAL 3011 K1 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® Color Paste PT Red Brown RAL 3013 is a ready-to-use compound comprising specific color pigments and a reactive silicone polymer, which is commonly used in ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without interference of the physical properties (e.g. hardness) and without migration as observed with silicone oil.

ELASTOSIL® Color Paste FL Ochre Brown RAL 8001 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® Color Paste FL Red Brown RAL 2001 is a ready-to-use masterbatch comprising specific pigments and reactive silicone polymers that are commonly used to produce ELASTOSIL® liquid silicone rubber. This ensures a homogeneous covulcanization of the color paste without significant impairment of the physical properties (e.g. hardness) and without migration, as may be observed for systems based on silicone oil.

KAFRIT CC 86600 LD is a brown pigment that exhibits photo-selective properties. It functions as a pigment, providing a brown color to the material. The product is designed to be photo-selective, meaning it filters and absorbs specific wavelengths of light, which suppresses weed growth while simultaneously increasing soil temperature.

KAFRIT CB 80C47 LL BROWN & MAGNET & UV combines magnet colors with UV protection in a custom brown color. It functions as a UV protector and pigment and is suitable for plastic and elastomer processing methods like blow molding and injection molding.

MOCOM Compounds ALCOLOR® HTC FC BN5047-15TR is a brown, transparent colorant for use in High Temperature Copolyester with a light fastness woolscale of 8. It has a dosage of 2.0 % extrusion and 2.0 % injection molding depending on wall thickness and required color intensity. It is suitable for food contact and is used for blow molded parts, extruded parts, and injection molded parts in the food processing industry, medical/personal care, and other application areas.

MOCOM Compounds ALCOLOR® Function PA UV A BN3113-10 is a brown colorant for use in Polyamide with a dosage of 5% for extrusion and 5% for injection molding, depending on wall thickness and required color intensity, and depending on application and operational area. It is free from cadmium, lead, and diarylide pigments, dust-free, has a high dispersibility, and a high additive content. It is suitable for various market segments, including injection molded parts, blow molded parts, and extruded parts.

MOCOM Compounds ALCOLOR® PC FC BN5033-17 is a brown, translucent colorant suitable for use in polycarbonate, with a dosage of 2.0% for extrusion and 2.0% for injection molding depending on application and operational area, wall thickness, and required color intensity. It has a light fastness of blue woolscale 7, and is free from cadmium, lead and diarylide pigments. It is dust-free, with a high dispersibility and high additive content, making it suitable for a variety of applications such as electrical and electronic, furniture, building and construction, sport and leisure, food contact, domestic appliances, household goods, and packaging.

MOCOM Compounds ALCOLOR® PC A BN938-4176 is a blue woolscale 7 light fastness colorant that is similar to RAL 8028 in color, brown in base polymer, and free from cadmium, lead, and diarylide pigments. It is dust-free, has a high dispersibility, and a high additive content. It is suitable for use in polycarbonate and is applicable to electrical and electronic, furniture, building and construction, and sport and leisure market segments.

MOCOM Compounds ALCOLOR® PC A BN1346-06 is a brown colorant similar to RAL 8014 with a dosage of 5.0% for extrusion and injection molding, depending on the application and operational area. It is free from cadmium, lead, and diarylide pigments, is dust-free, has a high dispersibility and additive content, and is suitable for use in polycarbonate. It is suitable for electrical and electronic, furniture, building and construction, and sport applications.

MOCOM Compounds ALCOLOR® PA BN5035-16 is a brown colorant for use in Polyamide, with a dosage of 5.0% for both extrusion and injection molding depending on the application and operational area. It has a light fastness woolscale of 7 and needs to be pre-dried at 80°C in a dry air (dessiccant) dryer for 2-12 h depending on the moisture content. It is free from cadmium, lead and diarylide pigments, dust-free, and has a high additive content. It is suitable for use in the electrical and electronic, furniture, building and construction, and sport and leisure markets and is highly recommended.

AGC Chemicals Americas, Inc. Fluon+™ FEP 100 Brown Concentrates are brown-colored concentrates designed for use in low-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrates are based on Chemours Teflon® FEP 100 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 108 Brown Concentrate is a green-colored concentrate designed for use in high-flow FEP (fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Daikin Neoflon® FEP NP-108 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE 7 Brown Concentrate is a brown color concentrate designed for use in low and medium flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® C-88A and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ PFA 2100 Brown Concentrate is a brown color concentrate designed for use in medium flow PFA (Perfluoroalkoxy) for pigmentation. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. It is used in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 9800 Brown Concentrate is a brown-colored concentrate designed for use in high-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Chemours Teflon® FEP TE-9494 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM HT Light Brown Concentrate is a light brown-colored concentrate designed for use in medium to high-flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM-HT and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM Brown Concentrate is a brown color concentrate designed for use in medium to high flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 9400 Brown Concentrate is a brown-colored concentrate designed for use in high-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Chemours Teflon® FEP TE-9494 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ PVDF Brown 10 Concentrates are brown-colored concentrates designed for use in PVDF (Polyvinylidene fluoride) for pigmentation. The color concentrates are based on Arkema Kynar® PVDF 2850-04 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ PFA 3000 Brown Concentrate is a brown-colored concentrate designed for use in high-flow PFA (Perfluoroalkoxy) for pigmentation. The color concentrate is based on Fluon® PFA P-62X and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM HT Brown Concentrate is a brown-colored concentrate designed for use in medium to high-flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM-HT and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 102 Brown Concentrates are brown-colored concentrates designed for use in high-flow FEP (fluorinated ethylene propylene) for pigmentation. The color concentrates are based on Neoflon® FEP NP-102 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AIT Colorants are high tint strength color dispersions of quality conventional pigments in water and glycol used primarily for aqueous in plant tinting. AIT dispersions are available in many standard colors and are also produced as custom color matches.

UltraPlus Brown Oxide 2115 is a binder and ethylene glycol-free pigment preparation, compatible with both latex and alkyd enamel architectural paints. It is machine dispensable and whose color shade, strength, and volumetric accuracy is stringently controlled.

UltraPlus Brown Oxide 62115T is a mixed C.I. Transparent universal dispersion used in tinting in-plant wood coatings. This dispersion is stringently controlled in color shade, strength, and gravimetric accuracy.

AquaPlus Brown Oxide 816 is a high strength water-based pigment dispersion used in tinting in-plant water-based architectural paints. This dispersion is stringently controlled in color shade, strength, and gravimetric accuracy.

UltraPlus Brown Oxide 63115 is a highly concentrated universal colorant designed for depot or in-plant volumetric machine dispensing.

AIT Colorants are high tint strength color dispersions of quality conventional pigments in water and glycol used primarily for aqueous in plant tinting. AIT dispersions are available in many standard colors and are also produced as custom color matches.

UltraPlus Brow Oxide 62115 are high strength low VOC and Alkyl Phenol Ethoxylate free colorants which form part of a tinting system for latex and alkyd architectural paint. Using quality pigment, these colorants are designed for manual and automatic Point-Of-Sale dispensing machines. Color shade, strength, and volumetric accuracy of these colorants are controlled stringently.

UltraPlus Brown Oxide 62115 is a Iron Oxide Blend universal colorant designed for depot or in-plant volumetric machine dispensing.