Products in Dispersions & Masterbatches: Polyamides

MOCOM Compounds ALCOLOR® Function PA AO A WT1114-15 is a 6% dosage injection molding colorant for use in Polyamide with a base polymer of Polyamide, a light fastness colorant of blue woolscale 8, a filler/additive system of light stabilizer, a color of white, special features of being UV stabilized, free from cadmium, lead and diarylide pigments, dust-free, with a high additive content and high dispersibility, for use in various building and construction applications, such as door handles.

MOCOM Compounds ALCOLOR® Function PA AO A OR3058-12 is a polyamide-based colorant with a light fastness of blue woolscale 7 and an orange color, similar to RAL 2010. It is free from cadmium, lead, and diarylide pigments and has a high dispersibility, a high additive content, and is dust-free. It is suitable for injection molded parts, blow molded parts, and extruded parts and should be pre-dried at 80°C in a dry air (dessiccant) dryer for 2-12 hours depending on moisture content.

MOCOM Compounds ALCOLOR® PA A BL3013-13 is a polyamide colorant with a blue color similar to RAL 5005. Its dosage for extrusion and injection molding is 3% and 3%, respectively, depending on the wall thickness and required color intensity. It is free from cadmium, lead, and diarylide pigments, dust-free, and has a high dispersibility and additive content. This makes it suitable for use in electrical and electronic, furniture, building and construction, and sport and leisure applications, such as injection molded parts, blow molded parts, and extruded parts.

MOCOM Compounds ALCOLOR® PA A RD1154-04 is a red colorant, similar to RAL 3005, for use in Polyamide with a dosage of 3% injection molding dependent on wall thickness and required color intensity. It is free from cadmium, lead, and diarylide pigments and has a dust-free, high additive content, and high dispersibility. It is suitable for injection molded parts, extruded parts, and blow molded parts and is applicable in various market segments.

MOCOM Compounds ALCOLOR® PA A BL3102-10 is a blue colorant with a light fastness woolscale of 4, similar to RAL 5020. It is free from cadmium, lead, or diarylide pigments, dust-free, and has a high additive content and high dispersibility. It is suitable for use in polyamide and can be used for injection molded parts, extruded parts, and blow molded parts.

MOCOM Compounds ALCOLOR® PA YL5025-17 is a yellow colorant free from cadmium, lead, and diarylide pigments, and is dust-free with high dispersibility and additive content. It is suitable for use in polyamide, and is suitable for blow molded parts, extruded parts, and injection molded parts. Depending on wall thickness and required color intensity, the dosage for extrusion is 2.0%, and for injection molding is 2.0%. This colorant is suitable for automotive, electrical and electronic, furniture, building and construction, and sport and leisure markets.

MOCOM Compounds ALCOLOR® PA A WT1159-03MG is a colorant with a white color, similar to RAL 9016, free from cadmium, lead and diarylide pigments, dust-free, and high dispersibility and additive content. It is suitable for use in Polyamide and is suitable for electrical and electronic, furniture, building and construction, sport and leisure applications. For optimal results, it should be stored in a dry, light-protected environment not above 30°C.

Kolokan Black Masterbatches are charecterised with high jetness, blue undertone and easy processability. The range consists of Masterbaches suitable for films, pipes, fibers, tapes, rotomoulding, injection/blow molding & many more Applications. Masterbatches with high UV stability, food contact approval and other customized requirements can be offered.

Lifocolor WHITE 50/2220 PA is based on various carrier polymers, which facilitate the qualified white coloring of a variety of engineering polymers and standard types. These products are available from stock; products not in our standard assortment are available upon request. Lifocolor's range also has white masterbatches with low and no titanium Oxide content for common standard types and engineering polymers. The incredible coloristic characteristics of TiO2), are generally not completely achieved and must be compensated with a higher dosage. The use of compostable polymers is becoming ever more important for this reason. Our Lifocolor assortment includes an Increasing selection Of white masterbatches based on biodegradable polymers and bio-based carrier systems made of renewable resources that also meet the requirements for composability under EN 13432.

Phthalocyanine is the main pigment used in Nylon 501.

Addkan Masterbatches for Engineering Polymers made for general applications in plastic processing are found to be un-suitable for use in engineering polymers

Ultramarine is the main pigment used in Nylon 508.

Kolokan Color Masterbatches for Nylon Fiber/Yarn/Non-Woven belongs to fiber color masterbatch category.

Metal-containing azo is the main pigment used in Nylon 105.

Quinacridone is the main pigment used in Nylon 404.

Iron oxide is the main pigment used in Nylon 703.

Titanium oxide is the main pigment used in Nylon 801.

Phthalocyanine is the main pigment used in Nylon 601.

Dioxazine is the main pigment used in Nylon 407.

Carbon black is the main pigment used in Nylon 901.

Calcined metal complex is the main pigment used in Nylon 103.

Calcined metal complex is the main pigment used in Nylon 102.

Perylene is the main pigment used in Nylon 304.

P-500ML is White masterbatch of ABS, HIPS, PC type which contains colorant and is a kind of masterbatch with high mechanical properties, aging resistance, thermal stability and good processibility. It can be colored up easily and its production cost is low.

The defoaming masterbatch is a functional masterbatch developed to solve the moisture problem in recycled plastics. It can greatly absorb the moisture of the plastic during the molding process, and solve the problems of blistering, cracks, spots, etc.