Products in Textile & Leather Chemicals: Binder

IAM Binder B is a low-molecular-weight cationic resin used for separating oil and water in refinery flotation units. It is also useful in clarifying latex waste and textile industry waste when combined with an anionic polymer. Additionally, the resin is effective in treating paper mill waste, and IAM Binder B holds a patent for it. A low-formaldehyde version of this product is also available.

STADEX® 10 Corn Dextrin is suitable for use as a direct additive in food products. It is classified as a Food Product by Primient. It may also be used in non-food applications.

STADEX® 132 Corn Dextrin is suitable for use as a direct additive in food products. It is classified as a Food Product by Primient. It may also be used in non-food applications.

ETHYLEX® 2065 Surface Treatment Starch demonstrate excellent viscosity stability over prolonged periods of time and show little change in viscosity due to temperature fluctuations.

ETHYLEX® 2025 Surface Treatment Starch demonstrate excellent viscosity stability over time and show little change in viscosity due to temp fluctuations

WACKER® Finish CT 51 L is a solvent-based silicone rubber solution specifically designed for fine coatings on textile substrates. It enables the application of fine coatings with a weight as low as < 5 g/m². This product offers high water columns and low air permeability, resulting in excellent performance. Additionally, it exhibits exceptional layer-to-layer adhesion when multiple coating layers are applied.

VINNAPAS® EN 1092 is a self-crosslinking, aqueous polymer dispersion specifically developed for the nonwovens and textile coating markets. It is produced without the use of plasticizers and is based on the monomers vinyl acetate and ethylene. VINNAPAS® EN 1092 provides a unique combination of high dry and wet strength, making it an excellent choice for various applications. The dispersion has a low formaldehyde content of less than 100 ppm, ensuring compliance with strict standards. It is particularly recommended as a binder for glassfiber scrims, offering a firm handfeel and excellent alkaline resistance.

VINNAPAS® CA 5544 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a medium-firm hand is required. The dispersion combines a very high solid content with a low viscosity, allowing the addition of very high filler loadings, resulting in adhesive formulations with solid contents of 80 percent or even greater. VINNAPAS® CA 5544 is not produced with any added organic solvents, plasticizers, or formaldehyde donors.

VINNAPAS® eco is a fossil resource-saving product where a specific share of the fossil-based raw materials required for manufacturing this product can be replaced by certified sustainable renewable feedstock. VINNAPAS® eco EN 1020 is specifically designed as a binder for soft hydrophilic nonwovens. It can be applied through spray, impregnation, or foam methods. VINNAPAS® eco EN 1020 provides excellent wet strength to the nonwoven while maintaining a low level of free formaldehyde content.

VINNAPAS® EN 428 is a self-crosslinking, plasticizer-free, aqueous polymer dispersion based on vinyl acetate and ethylene monomers. It offers a unique combination of softness, high wet strength, and versatile formulation options. The film formed by VINNAPAS® EN 428 has a soft texture, making it an excellent choice as a binder for personal hygiene nonwovens. Additionally, it can be used as a coating and finishing agent for woven and knitted textiles, providing enhanced properties and performance.

VINNAPAS® CA 55 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a medium-firm hand is required. The dispersion combines high solid content with a low viscosity—a combination that permits the addition of high filler loadings, resulting in adhesive formulations with high solid contents that are typically required in the carpet industry. VINNAPAS® CA 55 is not produced with any added organic solvents, plasticizers, or formaldehyde donors.

VINNAPAS® 192 (ULS) is a self-crosslinking, aqueous polymer dispersion produced from the monomers vinyl acetate and ethylene for the nonwovens market. The dispersion is produced without the use of plasticizers. VINNAPAS® 192 (ULS) offers a unique balance of high dry and wet strength, excellent absorbent properties, and a good handfeel.

VINNAPAS® DPN 36T is a self-crosslinking, aqueous dispersion based on the monomer vinyl acetate. It is produced without the use of plasticizers. VINNAPAS® DPN 36T can be used for a hard textile finish to adjust the handle or as a nonblocking component for hard, sealable coatings. VINNAPAS® DPN 36T is especially suitable as a binder for glass fiber fabrics.

VINNAPAS® EN 1024 is a self-crosslinking, aqueous polymer dispersion based on the monomers vinyl acetate and ethylene. This product is manufactured without the use of plasticizers. It is specifically designed to serve as a binder for soft and hydrophilic nonwovens. VINNAPAS® EN 1024 offers good wet strength to the nonwovens while maintaining a low level of formaldehyde. Additionally, it is particularly suitable for foam applications.

VINNAPAS® 192 (CGN) is a self-crosslinking, aqueous polymer dispersion produced from the monomers vinyl acetate and ethylene for the nonwovens market. The dispersion is produced without the use of plasticizers. VINNAPAS® 192 (CGN) offers a unique balance of high dry and wet strength, excellent absorbent properties, and a good handfeel.

VINNAPAS® EP 1133 is a carboxylated, higher-solids vinyl acetate-ethylene (VAE) copolymer dispersion with a glass transition temperature (Tg) of 0°C. This product is a moderately soft binder that provides excellent adhesion to various fiber substrates, making it suitable for a wide range of nonwoven applications. Additionally, it has the ability to be crosslinked for enhanced performance.

VINNAPAS® eco EN 428 is a self-crosslinking, plasticizer-free, aqueous polymer dispersion produced from the monomers vinyl acetate and ethylene. It offers a unique balance of softness, high wet strength, and broad formulation flexibility. The film formed by VINNAPAS® eco EN 428 has a soft texture, making it ideal as a binder for personal hygiene nonwovens. It also serves as a coating and finishing agent for woven and knitted goods, enhancing their performance and appearance.

VINNAPAS® EN 1028 is a self-crosslinking, aqueous polymer dispersion based on the monomers vinyl acetate and ethylene. It is manufactured without the use of plasticizers. This product is specifically designed to serve as a binder for soft hydrophobic nonwovens, providing them with high wet strength. Moreover, VINNAPAS® EN 1028 is an ideal choice as a binder for nonwovens that need to meet rigorous eco-labeling requirements.

VINNAPAS® CA 5800 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a firmer hand is required. The dispersion combines moderately high solid content with a lower viscosity—a combination that permits the addition of moderate filler loadings. This results in adhesive formulations with high solid contents that are typically required in the carpet industry. VINNAPAS® CA 5800 is not produced with any added organic solvents or plasticizers.

VINNAPAS® CA 5566 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a medium-firm hand is required. VINNAPAS® CA 5566 combines a very high solids content with a low viscosity—a combination that permits the addition of very high filler loadings, such as calcium carbonate, aluminum trihydrate (ATH), or other fillers. This results in adhesive formulations with high solid contents of 80 percent or even greater.

VINNAPAS® eco 192 is a self-crosslinking, aqueous polymer dispersion specifically developed for the nonwovens market. It is produced from vinyl acetate and ethylene monomers, and it does not contain any plasticizers. This product, VINNAPAS® eco, is designed to save fossil resources by allowing for the replacement of a portion of the fossil-based raw materials used in its manufacturing process with certified sustainable renewable feedstock.

VINNAPAS® EN 1165 is an aqueous, self-crosslinking copolymer dispersion based on vinyl acetate and ethylene. It is produced without the use of alkyl phenol ethoxylate (APEO)-based materials. This dispersion is specifically designed to serve as a moderately soft binder for nonwoven applications that demand exceptional wet tensile strength performance.

VINNAPAS® EZ 123 is an aqueous polymer dispersion of vinyl acetate and ethylene specifically designed for applications in the nonwovens market. It is produced without the use of plasticizers or APEO surfactants. This dispersion possesses a nonionic character and provides high dry tensile strength, resulting in a fuller and stiffer hand feel to nonwoven webs. It can be formulated with various chemistries, including cationic, anionic, or nonionic, to create specialized nonwovens. Additionally, VINNAPAS® EZ 123 is a low-odor dispersion with formaldehyde levels of less than 50 ppm.

VINNAPAS® EN 1033 is a self-crosslinking, aqueous polymer dispersion based on the monomers vinyl acetate and ethylene. It is produced without the use of plasticizers. This product is particularly suitable as a binder for soft nonwovens, offering good wet tensile strength. Additionally, VINNAPAS® EN 1033 has a low VOC content, making it an excellent choice as a binder for nonwovens and textiles that need to meet stringent eco-labeling requirements.

VINNAPAS® EP 907 is a vinyl acetate/ethylene-based dispersion specifically designed for nonwoven applications that require breakdown and re-dispersion in water. When used as a binder, substrates bound with VINNAPAS® EP 907 exhibit good dry tensile strength but easily disintegrate upon exposure to water. This makes it suitable for nonwoven applications where a stiff hand and dry tensile properties are desired. When agitated in water, substrates bound with VINNAPAS® EP 907 break down into smaller fragments of individual fibers. The dispersion is stabilized with an APEO-free surfactant system and has a low formaldehyde level of less than 50 ppm.

VINNAPAS® CA 5880 (BGH) is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a firmer hand is required. The dispersion combines high solid content with a lower viscosity—a combination that permits the addition of high filler loadings. This results in adhesive formulations with high solid contents that are typically required in the carpet industry. VINNAPAS® CA 5880 (BGH) is not produced with any added organic solvents, plasticizers, or formaldehyde donors.

VINNAPAS® 192 (CTY) is a self-crosslinking, aqueous polymer dispersion produced from the monomers vinyl acetate and ethylene for the nonwovens market. The dispersion is produced without the use of plasticizers. VINNAPAS® 192 (CTY) offers a unique balance of high dry and wet strength, excellent absorbent properties, and a good handfeel.

VINNAPAS® EF 1577 (CGN) is an aqueous polymer dispersion primarily composed of vinyl acetate and ethylene. This dispersion is manufactured without the addition of any organic solvents, plasticizers, or formaldehyde donors. It is particularly suitable for producing textile coatings that are free of plasticizers, providing them with exceptional permanent flexibility and resistance to aging.

VINNAPAS® EN 1267 is an aqueous, self-crosslinking copolymer dispersion based on vinyl acetate and ethylene. It is surfactant-stabilized and intentionally formulated without the use of APEO materials. This dispersion is specifically designed to serve as a soft binder for nonwoven applications that require excellent wet tensile strength performance.

VINNOL® CEN 2752 is an aqueous dispersion of a plasticizer-free, self-crosslinking copolymer of vinyl chloride and ethylene, characterized by its fine particle size and reduced formaldehyde content. This product serves as an excellent binder for soft nonwovens and needle felts, providing enhanced cohesion and structural integrity. Additionally, it is a versatile coating and finishing agent for woven and knitted goods.

VINNAPAS® CA 5677 is an aqueous polymer dispersion based on vinyl acetate and ethylene. VINNAPAS® CA 5677 is not produced with any added organic solvents, plasticizers, or formaldehyde donors. VINNAPAS® CA 5677 offers high dry strength, excellent absorbent properties, and a medium-firm hand. It can be used for needle-felted carpets and in the precoat coatings applied in the production of tufted carpet backings.

VINNAPAS® EN 1689 is a self-crosslinking vinyl acetate-ethylene copolymer designed specifically for the nonwoven and textile industries. This dispersion provides a soft hand feel, high dry and wet tensile strength, and low formaldehyde content in the final product. VINNAPAS® EN 1689 offers an exceptional combination of high efficiency and excellent soft hand feel.

VINNAPAS® CA 5824 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a medium/firm hand is required. VINNAPAS® CA 5824 combines high solids content with a low viscosity—a combination that permits the addition of very high filler loadings, such as calcium carbonate, aluminum trihydrate (ATH), or other fillers. This results in adhesive formulations with high solid contents of 80 percent or even greater.

VINNAPAS® EN 1020 is a self-crosslinking, aqueous polymer dispersion based on the monomers vinyl acetate and ethylene. This product is manufactured without the use of plasticizers. VINNAPAS® EN 1020 is specifically designed to serve as a binder for soft hydrophilic nonwovens. The binder can be applied using spray, impregnation, or foam methods. When used, VINNAPAS® EN 1020 provides good wet strength to the nonwoven material while maintaining a low level of free formaldehyde content.

VISIOMER® N-MMAA is a versatile bifunctional monomer that possesses both vinyl and hydroxymethyl groups. This monomer finds applications in various industries, including papermaking, textiles, and non-wovens, where it is utilized in adhesives, binders, and coatings resins. Additionally, VISIOMER® N-MMAA is used in the production of surface coatings, varnishes, films, and sizing, providing a wide range of possibilities for enhancing materials and creating resilient resins.

Ecosol® 45 Derivatized Starch (3645-C) is a derivatized wheat starch used as a binder, viscosity modifier, and strengthening agent in textile sizing, adhesives, and gypsum wallboard applications. It provides excellent adhesion, superior binding, and low dust formation. Available in powder form, it enhances textile processing and construction materials by improving durability and performance in warp sizing, wallcoverings, and industrial manufacturing.