Products in Reinforcements: Epoxies (EP)

Composite Materials Reinforcement B is designed for manufacturing fiber reinforced composite products with high performance and low environmental impact. This special fabric creates rib structure on one surface of the composite layer, significantly increasing the flexural stiffness and damping properties of thin composite shells with little additional weightpowerRibs material is designed for manufacturing fiber reinforced composite products with high performance and low environmental impact. This special fabric creates rib structure on one surface of the composite layer, significantly increasing the flexural stiffness and damping properties of thin composite shells with little additional weight

MultiTech MultiFunctional K is a natural raw cellulose. MultiTech MultiFunctional K is a beige colored softwood product with a cubic structure. The main particle range is 70-150 µm. It is a sustainable material for various applications as reinforcement and functional filler.

BB 2100 is a standard modulus carbon fiber precision cut from tow, with typical mechanical properties. These fibers are ideal for introduction into Bulk Molding Compound (BMC) materials, injection molding and pellet production for a wide range of end-use applications. Fibers come with standard epoxy-based sizing chemistry, optimized for use with most thermoset and thermoplastic resin systems. BB 2100 fibers are available as first quality certified materials as well as at discount without certifications. BB 2100 fiber is precision cut according to each customer specified length (e.g. 0.125, 0.25, 0.50 through 2.75" fiber lengths).

Woven fabrics made of FILAVA™ WF BSB3_0800.XXX.0127.T2/2.ISAA continuous filament for technical textiles and high-performance composites.

powerRibs material is designed for manufacturing fiber reinforced composite products with high performance and low environmental impact. This special fabric creates rib structure on one surface of the composite layer, significantly increasing the flexural stiffness and damping properties of thin composite shells with little additional weightpowerRibs material is designed for manufacturing fiber reinforced composite products with high performance and low environmental impact. This special fabric creates rib structure on one surface of the composite layer, significantly increasing the flexural stiffness. and damping properties of thin composite shells with little additional weight.

QISO® HW-48 is a quasi-isotropic fabric that is balanced in a single layer of the braid. It is stronger, lighter, and more efficient. QISO® HW-48 is a quasi-isotropic fabric that is balanced in a single layer of the braid. It is stronger, lighter, and more efficient.

Kamenny Vek BCF 13-150-KV42 direct is the newest modification of the KV12 sizing with improved performance and increased alkali resistance. Basalt roving of this series is mainly recommended for pultrusion technology and for processing into woven fabrics, UD tapes, multiaxial fabrics, prepregs and other products based on phenolic and epoxy resins.

SKAPS W 2400 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

Seapowet Companies CR1200-1/1200 offers a line of Constructed Rovings. Rewinding one or more ends of E-glass rovings forms these products. Package size (weight, diameter and face width) can be varied depending on the customers' requirements. Constructed Roving can be supplied on cores for outside draw or coreless, allowing for inside draw and no twist configurations.

D4-110-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

It is optimization of multiaxial fabrics (eMax) enables us to meet the high requirements of the Aerospace and Automotive industry with respect to quality and reliability, as well as the easiness of processing the material into parts.

Conformat N700 is a continuous strand, glass fiber reinforcing mat. N700 is a semi-porous mat most frequently used in flat or slightly contoured parts manufactured by Compression Molding, Closed Mold Injection, Resin Transfer Molding (RTM) and Glass Fiber Reinforced Gypsum (GFRG) processes. Parts produced using N700 have excellent trimming and punching qualities. N700 is produced with a 5 mil thick surfacing veil on both surfaces for improved surface qualities on finished parts.

Taishan Fiberglass EWR270, woven roving is made on looms by weaving direct roving into fabrics, it gives bi-directional (O° /90° ) reinforcement and is compatible with UP, VE & EP resins.

468T roving is used in filament winding applications in epoxide resin systems. The direct rovings can be used to manufacture pipes and gas cylinders.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

3B Fiberglass SE 3030 consist of conti-nuous filaments bonded into a single strand and wound onto a bobbin shape. A proprietary sizing applied on the fibers assures an excellent resin-to-glass bonding. SE 3030 Direct Rovings made of Advantex® glass are specifically desi-gned for multipurpose applications/processes such as the production of Non Crimped Fabrics, prepreg, filament winding, pultrusion, etc. The sizing of SE 3030 Direct Rovings is compatible with multiple resins: i.e. polyester, vinylester and epoxies. SE 3030 Direct Rovings present high level of fatigue performances, supe-rior interfibre and interlaminar shear strengths.

Woven fabrics made of FILAVA™ WF BSB3_0300.XXX.0127.P.ISAA continuous filament for technical textiles and high-performance composites.

468G roving is used in filament winding and weaving applications in epoxide resin systems. The direct rovings can be used to manufacture multi-axial fabrics.

D2-240-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

SKAPS LDB 2500 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

468 roving is used in prepreg application in epoxide resin systems. The direct rovings can be used to manufacture wind blades and sports goods.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

469H Roving is used in filament winding, pultrusion and weaving applications in epoxide resin systems. The direct rovings can be used to manufacture optic cable protective sleeves, pipes and pultruded profiles.

Polymat Free Flow – PP250 is a mechanically stitch bonded 3-dimensional reinforcement fabric consisting of a polypropylene needle bonded core sandwiched between two layers of chopped strand E-glass fiber.

Style 1167 is 3.82 oz. per square yard (129.51 g/m2) plain weave fiberglass fabric.

3B Fiberglass CM 4020 is a non-woven mat made out of ECR glass _x005F_x001f_laments, consisting of continuous _x005F_x001f_bres randomly oriented in multiple layers. The glass _x005F_x001f_bre is bonded with a silane coupling agent and the layers held together with a suitable binder. The CFM products contain an insoluble binder compatible with both un_x005F_x001f_lled or _x005F_x001f_lled unsaturated polyester, vinyl, ester, epoxy and polyurethane resin systems. The CM 4020 mat is ideally suited for injection molding RTM and S-RIM processes. The CM 4020 mat has a high rigidity which helps to work with large CFM cuts without loosing _x005F_x001f_bres. The ex-cellent mechanical properties provided by CM 4020 combined with the good electrical properties of the resins make the molded parts attractive for applica-tions like the electrical apparatus (high voltage), transportation and automotive industries, infrastructures equipments.

Seapowet Companies CR675-1/675 offers a line of Constructed Rovings. Rewinding one or more ends of E-glass rovings forms these products. Package size (weight, diameter and face width) can be varied depending on the customers' requirements. Constructed Roving can be supplied on cores for outside draw or coreless, allowing for inside draw and no twist configurations.

FILAVA™ MECY BSB3.7 320-80(10) Z30 IS65T CS03E are strands of continuous filaments made of enhanced mineral volcanic rock (aggregated and enriched batch) twisted in the yarns. The constituent strands or rovings are treated with “by-matrices or by-process” tailor made sizing system for excellent downstream treatment and transformation’s performance as well for high adherence to matrices in composites.

It is optimization of multiaxial fabrics (eMax) enables us to meet the high requirements of the Aerospace and Automotive industry with respect to quality and reliability, as well as the easiness of processing the material into parts.

ampliTex™ 5009 is a Non-crimp unidirectional flax fabric with fibers oriented at 0°, suitable for manufacturing fiber reinforced composite products with a high performance and a low environmental impact.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

D3-480-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

468B-1103 is a Twist‑free and alkali‑free direct yarn, suitable for winding process, mainly used for high‑pressure epoxy pipes. Suitable for epoxy resin ( EP ).

It is optimization of multiaxial fabrics (eMax) enables us to meet the high requirements of the Aerospace and Automotive industry with respect to quality and reliability, as well as the easiness of processing the material into parts.