Products in Prepregs & Molding Compounds: Glass Fibers

Composite Materials Molding Compound B is an inorganic reinforced phenolic molding compound, offering excellent heat resistance, dimensional stability, and processability. Customers have found this material useful for automotive applications. It is not intended for electrical insulating applications. Composite Materials Molding Compound B is available in black.

Composite Materials Laminate B is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ºC. Typical applications include insulation in power generation equipment and other structural applications when used in elevated temperatures. Composite Materials Laminate B is certifiable to MIL-I-24768/3, Type GEB.

Composite Materials Molding Compound A is a high-performance thermoplastic composite material that has been developed for applications requiring exceptional impact resistance, strength, and durability. Made from a polypropylene or polyamide resin matrix reinforced with both woven and randomly laid fibers, these moldable panels are favored as lightweight, high-performance replacements for steel, aluminum, magnesium, and other industrial materials, or alternatively as additional reinforcement for GMT panels.Features:High impact resistanceExceptional strength and durabilityLightweightMulti-layer glass fiber weave technologyReinforced with both woven and randomly laid fibersBenefits:Can replace traditional industrial materials like steel, aluminum, and magnesiumCan be used as an additional reinforcement for GMT panelsIdeal for use in structural vehicle components, such as front ends and bumper bracketsCan withstand high pressure and velocity conditionsApplications:Structural vehicle components, such as front ends and bumper bracketsIndustrial and manufacturing applications that require high impact resistance, strength, and durabilityAdditional reinforcement for GMT panels in various applications

Mitsubishi Chemical Advanced Materials is considered the world market leader in the production of classic glass-mat-reinforced thermoplastics (GMT). This semi-finished product in panel form was developed primarily as a substitute for metals (steel, aluminum etc.) and its main purchasers can be found in the automotive industry. This is where it is frequently pressed on the industrial scale into complex 3D structural components, although it is also used as panels.

SymaLITE is a special class of lightweight composites that offer low thermal expansion and exceptional mechanical and physical properties. Made from mixed glass and polymer fiber fleeces, SymaLITE is available in rolls and boards, which can be further molded into three-dimensional components using low-pressure molding.Features:Low thermal expansionExcellent mechanical and physical propertiesUltra-light and freely shapeableNoise-absorbentDirect facing with functional or decorative cover layers without adhesivesBenefits:Cost-efficient production of three-dimensional componentsDurable and noise-insulating material for car undershields and engine coversImpact-resistant and non-weathering for outdoor applications in the automotive and construction industrySubstitute for wood-based materials and rigid foams in sandwich constructions for the caravan and commercial vehicle industry.Applications:Automotive and caravan industryConstruction sectorCar headlinersOutdoor applications in the automotive and caravan industrySubstitute for wood-based materials and rigid foams in sandwich constructions for the caravan and commercial vehicle industry.

GMTex® is a high-performance thermoplastic composite material that has been developed for applications requiring exceptional impact resistance, strength, and durability. Made from a polypropylene or polyamide resin matrix reinforced with both woven and randomly laid fibers, these moldable panels are favored as lightweight, high-performance replacements for steel, aluminum, magnesium, and other industrial materials, or alternatively as additional reinforcement for GMT panels.Features:High impact resistanceExceptional strength and durabilityLightweightMulti-layer glass fiber weave technologyReinforced with both woven and randomly laid fibersBenefits:Can replace traditional industrial materials like steel, aluminum, and magnesiumCan be used as an additional reinforcement for GMT panelsIdeal for use in structural vehicle components, such as front ends and bumper bracketsCan withstand high pressure and velocity conditionsApplications:Structural vehicle components, such as front ends and bumper bracketsIndustrial and manufacturing applications that require high impact resistance, strength, and durabilityAdditional reinforcement for GMT panels in various applications

The OS-6 series are nylon 6 thermoplastic organosheets that contain woven fabrics as heavy as 2,500 g/m2. The composite sheets characterized by high strength and stiffness."

MC511FR is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ºC. Typical applications include structural applications when used in elevated temperatures. MC511FR also complies with MIL-I-24768/28, Type GEB-F. Certification to IEC standard is pending.

NP193PM is composed of a 17 oz. aramid and "soft glass" fibers are combined to make a fabric that is stronger than pure aramid and less abrasive than glass fabrics. This material is impregnated with a high temperature phenolic resin matrix which includes a non-conducting solid lubricant. This composite has excellent mechanical strength at elevated temperatures and adverse environments. Applications include wear plates for conveyor systems, valve plates, and compressor and pump vanes.

NP572 is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ºC and its Tg is guaranteed to be 180°C or greater. Typical applications include electrical equipment subjected to elevated temperatures. NP572 is certifiable to IEC 60216-3, IEEE STD 98-2002 and ASTM D2304 for Class H insulation in electrical devices. NP572 is also certifiable to MIL-I-24768/3, Type GEB.

MC511A is a high strength, glass epoxy laminate that is specially formulated to meet power generation producer’s exacting standards where higher strength at elevated temperatures are required. MC511A is certifiable to MIL-I-24768/3, Type GEB, IEC-60893-3-2 EP GC 203 and is halogen free to meet the European restrictions.

High flexural, impact and tensile strengths, and very high flexural modulus. It is constructed of glass fabric impregnated with an epoxy resin system. NP512 is engineered to provide better physical properties than NEMA FR-4, and be more dimensionally stable than standard NP510A. Applications for this material are where enhanced flexural modulus and physical strength are desired.

17 oz. aramid and "soft glass" fibers are combined to make a fabric that is stronger than pure aramid and less abrasive than glass fabrics. This material is impregnated with a high temperature phenolic resin matrix, which produces a composite with excellent mechanical strength at elevated temperatures and adverse environments. Applications include wear plates for conveyor systems, valve plates, and compressor and pump vanes. Variations of this material may be developed for specific applications.

MC511AF is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ºC. Typical applications include insulation in power generation equipment and other structural applications when used in elevated temperatures. MC511AF is certifiable to MIL-I-24768/3, Type GEB.

Woven glass fabric, melamine resin laminate. NP509 is very hard, flame resistant, machining grade with excellent electrical properties in high humidity conditions. NP509 has high physical strength and excellent arc resistance. Meets MIL-I-24768/1 type GME, MIL-I-24768/8 type GMG and IEC 60893-3-3-MF GC 201.

17 oz. aramid and "soft glass" fibers are combined to make a fabric that is stronger than pure aramid and less abrasive than glass fabrics. This material is impregnated with a high temperature epoxy resin matrix, which produces a composite with excellent mechanical strength at elevated temperatures and adverse environments.

MC514MG is a glass phenolic, semi-conductive laminate which was designed for corona discharge in the power generation industry. The graphitic carbon additive in the resin system enables easy installation in the slots and provides the necessary conductivity to safely remove harmful charges from the system.

Plenco® 07552 is a glass fiber reinforced novolac phenolic molding compound, exhibiting superior dimensional stability, good impact strength, and good electrical properties. Type ASTM 5948 MFH. UL recognized under component file E40654. 07552 is available in black.

Cuyahoga Plastics EB7000-1 is A U.L recognized, flame retardant, mineral-filled, glass fiber reinforced polyester thermoset molding compound suitable for compression, transfer, and injection molding. It is currently supplied in bulk form.

Cuyahoga Plastics AB9500 is a high strength and high heat resistant, glass fiber reinforced thermoset molding compound. It is currently supplied in bulk form only.

Cuyahoga Plastics S-4021 is a glass, mineral & graphite filled Silicone Thermoset molding compound specifically designed for contact components in the hot glass handling industry.

Plenco® 07200 is an organic fiber reinforced phenolic molding compound, offering improved mechanical strength, good powder properties and excellent cosmetic properties. UL recognized under component file E40654. 07200 is available in black.

Plenco® 06404 is a glass fiber and mineral filled two-stage phenolic molding compound offering superior molded mechanical properties, especially tensile strength. Plenco® 06404 is available in black. Plenco® 06404 is UL recognized under component file E40654.

Plenco® 07021 is impact grade phenolic molding compound. Customers have found this material useful for switchgear parts, or where mechanical assembly requires better impact strength. Plenco® 07021 is UL recognized under component file E40654. 07021 is available in black.

Plenco® 06401 is a glass fiber and mineral filled two-stage phenolic molding compound. UL recognized under component file E40654. 06401 is available in black.

Plenco® 08218 is an 18% glass-filled polyester bulk molding compound characterized as an electrical grade, but has many outstanding properties that make it suitable for a broad range of applications because of its excellent electrical resistance and mechanical strength. Customers have found this material useful for commercial/industrial heavy duty electrical parts, enclosures for power distribution equipment, fuse holders, circuit breaker cases, electric motor housings and components. It is available in bulk or extruded form and colors upon request. It is UL recognized under file E40654.

Plenco® 07321 is an organic fiber reinforced phenolic molding compound, offering improved mechanical strength and excellent dimensional stability. UL recognized under component file E40654. 07321 is available in black. 07321 was qualified under military specification MIL-M-14 (superseded by ASTM D-5948) TYPE CFI-5 and batches can, if requested and paid for, be tested for certification to the standard.

Plenco® 07591 is a mineral and flock cotton filled novolac phenolic molding compound. UL recognized under component file E40654. 07591 is available in black.

Cuyahoga Plastics S-4000 is a glass & mineral-filled Silicone Thermoset molding compound designed for components requiring extreme high temperature performance.

Warm punching, composite grade with woven glass covers for improved flexural, tensile and impact strength. It has better electrical properties and higher mechanical strength than NP611.

Plenco® 06343 is a mica reinforced phenolic molding compound, offering for a low power factor, low electrical losses, and good electrical properties after long exposures to high humidity. UL recognized under component file E40654. 06343 is available in natural color.

Cuyahoga Plastics S-4900 is a glass & mineral-filled Silicone Thermoset molding compound designed for components requiring extreme high temperature performance.

Plenco® 06500 is a glass-reinforced phenolic molding compound offering improved strength, dimensional stability, and excellent electrical properties. UL recognized under component file E40654. 06500 is available in black.

Plenco® 06553 is a mineral and glass fiber reinforced two-stage phenolic molding compound, formulated for dimensional stability, good chemical resistance to brake fluids, such as DOT 3 and 4, and should provide grinding to close tolerances. 06553 is UL recognized under component file E40654. 06553 is available in black. 06553 was qualified under military specification MIL-M 14 (superseded by ASTM D-5948) TYPE MFH and batches can, if requested and paid for, be tested for certification to the standard.

Plenco® 08235 is a 15% glass-filled polyester bulk molding compound characterized as a flame-retardant, medium-strength electrical grade. Customers have found this material useful for a broad range of applications such as capacitor cans, electrical enclosures, etc. It is available in bulk or extruded form, natural and black. Other colors available upon request. It is UL recognized under file E40654.

Plenco® 07307 is an organic fiber reinforced phenolic molding compound, offering improved mechanical strength properties. UL recognized under component file E40654. 07307 is available in black. 07307 was qualified under military specification MIL-M-14 (superseded by ASTM D-5948) TYPE CFG and batches can, if requested and paid for, be tested for certification to the standard.