Products in Prepregs & Molding Compounds: Radomes

AX-5110 is a flame retardant laminates, honeycomb and foam panels.

Toray TC420 is a flow-controlled high temperature cyanate ester resin, toughened to resist microcracking. TC420 is specifically formulated to facilitate production of large out-of-autoclave structures. It can act as a self-adhesive system and is resistant to microcracking. This resin represents a new family of next generation high temperature resins, film adhesives, syntactic paste and expanding foams for ultra-high temperature conditions. TC420 is easy to process, and yields low void laminates with a flexible cure cycle under vacuum-only pressure. This system is also autoclave processable. TC420 is an attractive alternative to bismaleimide (BMI) and polyimide resins.

AX-3100 is a toughened low dielectric epoxy fiberglass prepreg.

Park’s E-752 is a toughened, 365°F cure epoxy system designed for demanding structural applications up to 265°F/wet. E-752 offers a good balance of toughness, high service temperature and good moisture resistance, as well as excellent tack and drape. Formulated for both oven and autoclave cure, E-752 provides for easy processing with oven cure, without sacrificing mechanical properties.

Toray BT250E-1 resin system is a 121°C (250°F) cure epoxy prepreg system with excellent toughness and strength. It provides an outstanding surface finish under vacuum-bag/oven-cure only. The resin system, which is self-adhesive to honeycomb and foam core, is MIL-R-9300 qualified and makes a great choice for many Applicationss in the low-tomedium-service temperature range.

Park’s E-765 is a toughened 270°F cure epoxy prepreg system designed to replace 350°F cure systems in many aircraft structural applications. Park’s E-765-3K-PW, -6K-5HS and 7781 materials are AGATE approved. FAA-approved, B-Basis design allowable databases for AGATE materials are available upon request. Park has also developed AGATE approved material and process specifications which are also available upon request.

Park’s E‐720 is a modified epoxy resin system designed toexposure to high temperature. E‐720 has a proven history inmany demanding aerospace applications.

Toray Toray AmberTool® HX42 is a low temperature curing epoxy composite tooling prepreg. After a suitable post cure, an end use temperature of 190°C (374°F) is achieved. Toray AmberTool® HX42 is an exceptional and very well proven system that exhibits a high end use temperature and extended out life. 50–75°C (122–167°F) Low Temperature Curing Epoxy Tooling Prepreg.

Aeroglide® is an epoxy-based composite surfacing film which can be oven or autoclave cured at either 250°F/120°C or 350°F/180°C to eliminate surface porosity for composite parts.

Renegade Materials Corporation RM-5003 is a low dielectric and loss with high performance prepreg.

Toray Toray AmberTool® TC40 is a BMI resin that which provides excellent elevated temperature properties and processability. Toray AmberTool TC40 has been designed for high temperature tooling Applicationss. BMI Tooling Prepreg.

Park’s E-761 is a versatile self-adhesive epoxy matrix for use in aerospace and commercial applications where ease of processing and cost are key considerations.

Renegade Materials Corporation RM-2014-LDK-TK is a 300°F (150°C) cure, modified epoxy prepreg system with very low dielectric and loss properties. RM-2014-LDk-TK provides good tack, drape and handling, and a great balance of mechanical properties.

Toray’s TC250 offers an excellent balance of toughness, mechanical properties, and hot/wet performance. It is easily processed via vacuum bag/oven, autoclave, or press curing operations. Although TC250 is a 130°C (265°F) cure system, it can be post cured for a higher dry and wet Tg, which enhance the product’s elevated temperature performance. TC250 can also be cured or freestanding post cured to 177°C (350°F) to increase its high temperature performance. TC250 is available with virtually all fiber reinforcements in uni-directional tape, slit unidirectional tape, woven, and non-woven prepreg forms. 130°C (265°F) Cure, Toughened Epoxy Resin System

Park’s E-746 is a modified epoxy resin system designed to retain excellent mechanical properties after extended exposure to high temperature. E-746 has a proven history in many demanding aerospace applications.